Rako – DIN-4T – Wired – DIN Rail Module – 4-Channel Trailing Edge Dimmer
£650.00 + VAT
Lead time circa 2–4 days
Special order, non-returnable
- Refurbished In-House
Components repaired or replaced where needed, then cleaned and bench tested.New, Box Opened
Unused surplus stock with opened packaging. This unit is sold untested. - Specification Help
Need help with specification or compatibility? Speak to our team.
Specification
Additional information
| Manufacturer | Rako |
|---|---|
| Range | Rako Wired |
| Model | DIN-4T |
| Type | DIN Rail Module – 4-Channel Trailing Edge Dimmer |
| Condition | New |
| Requires | DIN-LINK, powered by a DIN-PSU-100 |
| Configuration / programming method | Initial setup & programming – Via Windows / MacOS programming software (Engineer required) / Tweaks to lighting scenes and levels – Via Windows / MacOS programming software (Engineer required). Or via iOS / Android app (By end user) |
| Configurable minimum dimming levels | Yes |
| Configurable dimming fade speeds | Yes |
| Compatible with wall mounted keypads | Yes – A full range of wired and wireless keypads, with engraved scene buttons, available in multiple styles and finishes. Keypads sold separately. |
| Compatible with wireless infrared remotes | Yes – Infrared remotes sold separately |
| Compatible With 3rd Party Control Systems | Yes – Controllable with 3rd party control systems such as Savant, Crestron, Control 4, etc. Control systems sold separately. |
| Number of controllable circuits | 4 |
| Controllable circuit types | Mains (Phase / Triac) – Trailing Edge |
| Control type | Mains |
| Warranty | 2 years hardware warranty provided by Rosette Electrical |
| Dimming type | Trailing edge |
| Load types | LED lamp, tungsten, low-voltage halogen and any other trailing edge dimmable load (IEC/EN 60669-2-1) |
| Minimum load | 1W |
| Maximum load | LED – 200W; Mains halogen – 400W |
| Input supply | 230V AC +10% / -15% |
| Rated current | 10A total |
| Protection | Auto resetting short circuit protection; Over temperature protection; Voltage surge protection |
| Fuse | 10A internal fuse; 5A internal channel fuse |
| Dimensions | W157 x H110 x D59mm |
| DIN width | 9 DIN modules |
| Weight | 285g |
| Terminal size | DIN bus: 0.5-1.5mm²; Input / load: 1.0-2.5mm² |
| Connections | DIN bus – 4-way screw terminal; Input / load – push terminals |
| Communication | DIN bus (8 DPU) |
| Mounting | Top hat DIN rail (IEC/EN 60715) |
| Vertical clearance | 150mm |
| Operating temperature | +2C to +40C |
| Humidity | +5% to 90% non-condensing |
| Standards | RoHS; UKCA, CE; EN 60669-2-5 |
Specification Sheets & Documents
- Rako - DIN-4T - Technical SpecificationsView PDF: Rako - DIN-4T - Technical Specifications
- Rako - DIN-4T - Instruction ManualView PDF: Rako - DIN-4T - Instruction Manual
- Rako - DIN System OverviewView PDF: Rako - DIN System Overview
- Rako - System Wiring OverviewView PDF: Rako - System Wiring Overview
Not sure it’s the right part?
Speak to our in-house specialists about your system, we’ll help identify the part you need.
