Rako – DIN-LINK – Wired – DIN Rail Module – Power & Communication Unit
The DIN-LINK is the power and communication unit for a Rako DIN system, and passes commands between the Rako wired network and the DIN bus. It powers both, with capacity for up to eight DIN modules and 30 wired network devices. The DIN-LINK is powered by a DIN-PSU-100 and joins the network through the supplied DIN-CONNECT.
£550.00 + VAT
Lead time circa 2–4 days
Special order, non-returnable
- Refurbished In-House
Components repaired or replaced where needed, then cleaned and bench tested.New, Box Opened
Unused surplus stock with opened packaging. This unit is sold untested. - Specification Help
Need help with specification or compatibility? Speak to our team.
Specification
Additional information
| Manufacturer | Rako |
|---|---|
| Range | Rako Wired |
| Model | DIN-LINK |
| Type | DIN Rail Module – Power & Communication Unit |
| Condition | New |
| Configuration / programming method | Initial setup & programming – Via Windows / MacOS programming software (Engineer required) / Tweaks to lighting scenes and levels – Via Windows / MacOS programming software (Engineer required). Or via iOS / Android app (By end user) |
| Warranty | 2 years hardware warranty provided by Rosette Electrical |
| Input supply | 24V DC from a DIN-PSU-100 |
| DIN bus capacity | 64 DPU (DIN-4T, DIN-4C, DIN-8S: 8 DPU each; DIN-DLI: 16 DPU) |
| Requires | DIN-PSU-100 power supply |
| Wired network capacity | 30 devices via RJ45; 1 via RJ11 |
| Protection | Over current protection; Over voltage protection; Under voltage lockout; Reverse polarity protection; Soft start |
| Dimensions | W157 x H110 x D59mm |
| DIN width | 9 DIN modules |
| Weight | 270g |
| Terminal size | DIN bus: 0.5-1.5mm²; Input: 1.0-2.5mm² |
| Connections | DIN bus – 4-way screw terminal; Wired network – RJ45 port and RJ11 port; DC input – push terminal |
| Communication | DIN bus, Rako wired network |
| In the box | DIN-LINK; DIN-CONNECT |
| Mounting | Top hat DIN rail (IEC/EN 60715) |
| Vertical clearance | 150mm |
| Operating temperature | +2C to +40C |
| Humidity | +5% to 90% non-condensing |
| Standards | RoHS; UKCA, CE; EN 60669-2-5 |
Specification Sheets & Documents
- Rako - DIN-LINK - Technical SpecificationsView PDF: Rako - DIN-LINK - Technical Specifications
- Rako - DIN-LINK - Instruction ManualView PDF: Rako - DIN-LINK - Instruction Manual
- Rako - DIN System OverviewView PDF: Rako - DIN System Overview
- Rako - System Wiring OverviewView PDF: Rako - System Wiring Overview
Not sure it’s the right part?
Speak to our in-house specialists about your system, we’ll help identify the part you need.
