Rako – DIN-PSU-100 – Wired – DIN Rail Power Supply – 24V DC
The DIN-PSU-100 is a 24V DC DIN rail power supply for a Rako DIN system, and powers the DIN-LINK and up to 30 devices on the Rako wired network. Every DIN-LINK needs one to run.
£95.00 + VAT
Lead time circa 2–4 days
Special order, non-returnable
- Refurbished In-House
Components repaired or replaced where needed, then cleaned and bench tested.New, Box Opened
Unused surplus stock with opened packaging. This unit is sold untested. - Specification Help
Need help with specification or compatibility? Speak to our team.
Specification
Additional information
| Manufacturer | Rako |
|---|---|
| Range | Rako Wired |
| Model | DIN-PSU-100 |
| Type | DIN Rail Power Supply – 24V DC |
| Condition | New |
| Warranty | 2 years hardware warranty provided by Rosette Electrical |
| Input supply | 230V AC +10% / -15% |
| Output | 24V DC ± 1%; 3A; 90W |
| Wired network capacity | 30 devices |
| Protection | Over current protection; Over voltage protection; Under voltage lockout; Reverse polarity protection |
| Dimensions | W70 x H87.5 x D55mm |
| DIN width | 4 DIN modules |
| Weight | 230g |
| Terminal size | Input and output: 1.0-3.0mm² |
| Connections | Input – 2 x M2.5 screw terminals; Output – 4 x M2.5 screw terminals |
| Mounting | Top hat DIN rail (IEC/EN 60715) |
| Vertical clearance | 150mm |
| Operating temperature | -30C to +70C |
| Humidity | 5% to 95% non-condensing |
| Standards | RoHS; UKCA, CE; IEC 62368-1; IEC/EN/BS EN 61010-1/-2-201; IEC 60335-1; IEC/EN/BS EN 61558-1/-2-16 |
Specification Sheets & Documents
- Rako - DIN-PSU-100 - Technical SpecificationsView PDF: Rako - DIN-PSU-100 - Technical Specifications
- Rako - DIN System OverviewView PDF: Rako - DIN System Overview
Not sure it’s the right part?
Speak to our in-house specialists about your system, we’ll help identify the part you need.
