Rako DIN-4T Technical Specifications

Page 1

Datasheet DIN-4T 4-Channel Trailing Edge Dimmer Module Overview Specification The DIN-4T is a four-channel trailing edge dimming module designed for DIN rail-mounted enclosures. Mechanical W157xH110xD59mm Dimensions Width = 9 DIN Modules The DIN-4T is configured using Rasoft Pro. Once configured, it can be used in a Rako Wired System and Weight 285g controlled via Rako Wired Keypads such as the WK-EOS or WCM. Mounting Top Hat DIN Rail IEC/EN 60715 The DIN-4T can be controlled using Rako Wireless Vertical Clearance 150mm Keypads such as the RK-MOD and RNC when used in DIN Bus: 0.5–1.5mm² (20–15 AWG) conjunction with a WK-HUB or WRB100. Cable Size Input/Load: 1.0–2.5mm² (17-13 AWG) Connections DIN Bus - 4 way screw terminal Terminals Input/Load - Push terminal Electrical Input Supply Voltage 230V AC +10% / -15% Total Rated Current 10A Auto resetting short circuit protection, Protection Over temperature protection, Voltage surge protection 10A internal fuse, 5A internal channel Fuses fuse LED lamp, Tungsten, Low-Voltage Halogens and any other trailing edge Typical Loads dimmable load as defined by IEC/EN Dimensions 60669-2-1. Minimum Load 1W LED - 200W, Maximum Load Mains Halogen - 400W RoHS Certification & Standards UKCA, CE EN 60669-2-5 Communication DIN Bus (DPU Usage: 8) Installation & Setup Environmental Operating Temperature +2 °C to +40 °C For information on installing and setting up the DIN-4T, see the Instruction Manual. Temperature +2C to +40C Climate Range Humidity +5% to 90% non condensing telephone +44 (0) 1634 226666 | www.rakocontrols.com Document Version 1.0.0 Specifications and data are subject to change without notice. © 2025 Rako Controls Ltd