Future Automation MDM-SPLIT 3473 mm travel example technical sheet

Page 1

MDM SPLIT - T3473 MOVING DOOR MECHANISM Open Position Closed Position Representative Moving panels TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 1 FUTUREAUTOMATION

Page 2

MDM SPLIT - T3473 MOVING DOOR MECHANISM PANELS CLOSED Recommended minimum space at end of Recommended minimum space at end of 31 1/2" mechanism to allow access to belt tensioner mechanism to allow access to belt tensioner 800 7 7/8" 7 7/8" 200 200 78" 78" Areas requires access for Areas requires access for 1981 1981 switch adjustment from switch adjustment from below below 156" 3962 PANELS OPEN 114 3/16" 114 3/16" C L 2900 2900 23 5/8" 600 Hanger Seperation 68 3/8" 68 3/8" 1737 1737 78" 78" 1981 1981 136 3/4" 3473 MAX. TRAVEL TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 2 FUTUREAUTOMATION

Page 3

MDM SPLIT - T3473 MOVING DOOR MECHANISM 3/8" 3 7/8" 10 99 GENERAL DIMENSIONS MDM is fixed from Maximum underneath through Length of mounting holes in the Fixing Head column Hanger Adjustment Loosen the nuts and raise or lower Cable loom to control Boards to desired position 4 1/16" 103 7 1/2" 190 6 3/4" 5/16" 171 7 DETAIL B 7 11/16" 7 11/16" 195 195 Motors located at the middle of the mechanism. DETAIL C Recommended to allow access from below for servicing. 114 3/16" 114 3/16" C A L 2900 2900 16 7/16" 16 7/16" SYM 418 418 2" C 51 B A 78" 78" 1981 1981 SECTION A-A 292 3/4" 7436 259 13/16" 6600 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 3 FUTUREAUTOMATION

Page 4

MDM SPLIT - T3473 MOVING DOOR MECHANISM SWITCH ADJUSTMENT D The limit switches can be adjusted using an allen key. Undo the bolts and slide switch to desired position. DETAIL D SCALE 1 : 2 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 4 FUTUREAUTOMATION

Page 5

MDM SPLIT - T3473 MOVING DOOR MECHANISM The two separate sides each come with a control box as shown

308 12 1/8"

CABLE LOOM RS232 PORT IR OUTPUT LENGTH APPROX INDICATOR LED 118 1/8" CONTACT 3000 CLOSURE PORT IR LEAD INPUT 3.5mm [0.14"] JACK EMERGENCY STOP

CONNECTOR 20 max 0.79 max

5/16"

52 8 CORE CABLE 2 1/16"

MOTOR 5 10mm [0.4"] dia. 3/16" 5 7/8" 3 CORE CABLE MAINS INPUT

EU SPEC: 0.5mm² 150 SWITCH LIMITS US SPEC: 20AWG 6mm [0.25"] dia. EU SPEC: 0.5mm² NOTES US SPEC: 20AWG • POWER SUPPLY UNIT (PSU) WILL ALLOW 110V OR 240V AC INPUT. THE SAME PSU IS USED FOR EU OR US MAINS SUPPLIES. • OTHER THAN CONTROL CABLES, ALL CABLES TERMINATE AT CONTROL BOARD VIA STANDARD PHOENIX CONNECTORS. • CABLE LOOM LENGTH SUPPLIED AT APPROX. 3m [118"]. LOOM CAN BE EXTENDED UP TO MAXIMUM OF APPROX. 10m [400"]. • MINIMUM CABLE BEND RADIUS 25mm [1"]. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 5 FUTUREAUTOMATION