Future Automation MDM-SPLIT 1950 mm travel example technical sheet

Page 1

MDM SPLIT - T1950 MOVING DOOR MECHANISM Open Position Closed Position Representative Moving panels TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 1 FUTUREAUTOMATION

Page 2

MDM SPLIT - T1950 MOVING DOOR MECHANISM PANELS CLOSED Area requires access Area requires access for the motor for the motor Recommended minimum space at end of mechanism to Recommended minimum space at end of mechanism to allow access to belt tensioner allow access to belt tensioner 7 7/8" 7 7/8" 200 200 Areas requires access for switch Areas requires access for switch adjustment from below adjustment from below 41 9/16" 41 9/16" 1055 1055 83 1/16" 2110 3 15/16" 100 PANELS OPEN 78 3/4" 78 3/4" 2000 2000 15 3/4" 400 Hanger Seperation 38 3/8" 41 9/16" 41 9/16" 38 3/8" 975 1055 1055 975 C L 76 3/4" 1950 MAX. TRAVEL TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 2 FUTUREAUTOMATION

Page 3

MDM SPLIT - T1950 MOVING DOOR MECHANISM Cable loom to control Boards GENERAL DIMENSIONS 3/8" 3 7/8" 10 99 DETAIL C Maximum MDM is fixed from Length of underneath through Fixing Head mounting holes in the column Hanger Adjustment 7 11/16" 7 11/16" 3 3/8" ±1/8" Loosen the nuts and raise or 195 195 86 ±3 lower to desired position 3 15/16" 100 Motors located at the middle of the mechanism. 8" Recommended to allow access from below for servicing. 203 7 1/4" 184 DETAIL B 2 1/8" 3 15/16" 54 100 A 78 3/4" 78 3/4" 2000 2000 1" 25 C A B SECTION A-A C L SYM 38 3/8" 41 9/16" 41 9/16" 38 3/8" 975 1055 1055 975 159 13/16" 4060 161 7/16" 4100 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 3 FUTUREAUTOMATION

Page 4

MDM SPLIT - T1950 MOVING DOOR MECHANISM SWITCH ADJUSTMENT The limit switches can be adjusted using an allen key. Undo the bolts and slide switch to desired position. D DETAIL D TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 4 FUTUREAUTOMATION

Page 5

MDM SPLIT - T1950 MOVING DOOR MECHANISM The two separate sides each come with a control box as shown

307.5 12 1/8"

RS232 PORT CABLE LOOM IR OUTPUT INDICATOR LED LENGTH APPROX CONTACT 118 1/8" CLOSURE 3000 PORT IR LEAD INPUT 3.5mm [0.14"] JACK EMERGENCY STOP CONNECTOR

20 max 0.79 max

1/4" 7 8.2 5/16"

52.1 2 1/16"

8 CORE CABLE 5.2 3/16" MOTOR MAINS INPUT 5 7/8"

149.5 10mm [0.4"] dia. 3 CORE CABLE EU SPEC: 0.5mm² SWITCH LIMITS US SPEC: 20AWG 6mm [0.25"] dia. NOTES EU SPEC: 0.5mm² US SPEC: 20AWG • POWER SUPPLY UNIT (PSU) WILL ALLOW 110V OR 240V AC INPUT. THE SAME PSU IS USED FOR EU OR US MAINS SUPPLIES. • OTHER THAN CONTROL CABLES, ALL CABLES TERMINATE AT CONTROL BOARD VIA STANDARD PHOENIX CONNECTORS. • CABLE LOOM LENGTH SUPPLIED AT APPROX. 3m [118"]. LOOM CAN BE EXTENDED UP TO MAXIMUM OF APPROX. 10m [400"]. • MINIMUM CABLE BEND RADIUS 25mm [1"]. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 5 FUTUREAUTOMATION