Future Automation MDM-SPLIT 1400 mm travel example technical sheet

Page 1

MDM SPLIT T1400 MOVING DOOR MECHANISM Open Position Closed Position Representative Moving panels TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 1 FUTUREAUTOMATION

Page 2

MDM SPLIT T1400 MOVING DOOR MECHANISM 7 7/8" Recommended minimum space at end of mechanism to Area requires access 200 allow access to belt tensioner for the motor Recommended minimum space at end of mechanism to 7 7/8" allow access to belt tensioner PANELS CLOSED 200 Areas requires access for switch Areas requires access for switch adjustment from below adjustment from below 55 1/8" 1400 1" PANELS OPEN 25 63" 63" 1600 1600 9 13/16" 250 Hanger Separation 45 1/4" 1150 27 9/16" 27 9/16" 700 700 C L 55 1/8" 1400 MAX. TRAVEL TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 2 FUTUREAUTOMATION

Page 3

MDM SPLIT T1400 MOVING DOOR MECHANISM DETAIL C GENERAL DIMENSIONS Cable loom to Control Boards Hanger Adjustment Loosen the nuts and raise or lower to desired position 3 5/16" ±1/8" 7 11/16" 7 11/16" 3/8" 3 7/8" 83.5 ±3 195 195 10 99 Maximum MDM is fixed from Motors located at the middle of the mechanism. Length of underneath through Recommended to allow access from below for servicing. DETAIL B mounting holes in the Fixing Head column 8" 203.5 C L SYM 3 15/16" 63" 63" A 100 1600 1600 7 3/16" 182 B C A 2 1/8" 54 1" 27 9/16" 27 9/16" 27 9/16" 25 700 700 700 27 9/16" 700 110 1/4" 2800 SECTION A-A 126 15/16" 3225 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 3 FUTUREAUTOMATION

Page 4

MDM SPLIT T1400 MOVING DOOR MECHANISM SWITCH ADJUSTMENT The limit switches can be adjusted using a 3mm Allen key. Undo the bolts and slide switch to desired position. DETAIL D D TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 4 FUTUREAUTOMATION

Page 5

MDM SPLIT T1400 MOVING DOOR MECHANISM The two separate sides each come with a control box as shown

307.5 12 1/8"

CABLE LOOM RS232 PORT IR OUTPUT LENGTH APPROX INDICATOR LED 118 1/8" CONTACT 3000 CLOSURE PORT IR LEAD INPUT 3.5mm [0.14"] JACK EMERGENCY STOP

CONNECTOR 20 max 0.79 max

5/16"

52.1 8 CORE CABLE 2 1/16"

MOTOR 5.2 10mm [0.4"] dia. 3/16" 5 7/8" 3 CORE CABLE MAINS INPUT

EU SPEC: 0.5mm² 149.5 SWITCH LIMITS US SPEC: 20AWG 6mm [0.25"] dia. EU SPEC: 0.5mm² NOTES US SPEC: 20AWG • POWER SUPPLY UNIT (PSU) WILL ALLOW 110V OR 240V AC INPUT. THE SAME PSU IS USED FOR EU OR US MAINS SUPPLIES. • OTHER THAN CONTROL CABLES, ALL CABLES TERMINATE AT CONTROL BOARD VIA STANDARD PHOENIX CONNECTORS. • CABLE LOOM LENGTH SUPPLIED AT APPROX. 3m [118"]. LOOM CAN BE EXTENDED UP TO MAXIMUM OF APPROX. 10m [400"]. • MINIMUM CABLE BEND RADIUS 25mm [1"]. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 5 FUTUREAUTOMATION