Lutron Quantum – 4-Zone 5 A Switching Module – QSNE-4S5-230-D
The QSNE-4S5-230-D is a four-zone switching module for use in a Lutron Quantum system, rated at 5 A per zone. Each zone switches a lighting or motor circuit, and the module also has an emergency contact closure input and a programmable contact closure output. The QSNE-4S10-D is a similar module rated at 10 A per zone.
Legacy product familyThis is a legacy product family. We still have some stock of this family, please contact us to discuss your requirements.Contact us to discuss your requirements
- Refurbished In-House
Components repaired or replaced where needed, then cleaned and bench tested.New, Box Opened
Unused surplus stock with opened packaging. This unit is sold untested. - Specification Help
Need help with specification or compatibility? Speak to our team.
Specification
Additional information
| Manufacturer | Lutron |
|---|---|
| Range | Energi Savr Node |
| Model | QSNE-4S5-230-D |
| Product Type | Switch Modules |
| Systems | Quantum systems only, not standalone Energi Savr Node |
| Number of zones | 4 |
| Load ratings | 5 A per zone, 16 A maximum per module, for tungsten, AC general use, electric discharge lamp, electronic ballast, resistive and inductive loads; motor 5 A (½ HP) per zone. Air-gap off per output. No minimum load |
| Power | 220–240 V~ 50/60 Hz, single feed, 16 A maximum input current |
| Contact closure output | One programmable output with normally open and normally closed dry contacts: 1.0 A at 0–24 V DC, 0.5 A at 0–24 V AC (resistive). Maintained or momentary; opens if power is lost |
| QS link | Counts as 1 device and 4 zones (Quantum: up to 100 devices and 512 zones per link) |
| Programming | Quantum programming software, version 3.4 or later |
| Width | 9 DIN modules (161.7 mm) |
| Dimensions | 161.7 × 89.7 mm, 60.6 mm deep |
| Mounting | Lutron DIN panel, or an IP20 (minimum) rated consumer panel or breaker panel with integrated DIN rail. Room ambient 0–40 °C. Internal relays click |
| Heat output | 24 BTU/h maximum |
| Environment | Relative humidity less than 90%, non-condensing. Indoor use only |
| Regulatory approvals | Complies with IEC/EN 60669. CE marked, RoHS compliant |
Specification Sheets & Documents
- Quantum Switching Power Module QSNE-4S5-230-D – specification submittal (3691079e)View PDF: Quantum Switching Power Module QSNE-4S5-230-D – specification submittal (3691079e)
Not sure it’s the right part?
Speak to our in-house specialists about your system, we’ll help identify the part you need.
