Rako – DIN-4C – Wired – DIN Rail Module – 4-Channel Curtain & Blind Control
The DIN-4C is a four-channel curtain and blind controller for a Rako wired system, made to mount on DIN rail inside an enclosure. Each channel can be wired for a mains or DC motor, or for dry contact control, and can be configured for momentary or latching action. It connects to a DIN-LINK over the DIN bus.
£650.00 + VAT
Lead time circa 2–4 days
Special order, non-returnable
- Refurbished In-House
Components repaired or replaced where needed, then cleaned and bench tested.New, Box Opened
Unused surplus stock with opened packaging. This unit is sold untested. - Specification Help
Need help with specification or compatibility? Speak to our team.
Specification
Additional information
| Manufacturer | Rako |
|---|---|
| Range | Rako Wired |
| Model | DIN-4C |
| Type | DIN Rail Module – 4-Channel Curtain & Blind Control |
| Condition | New |
| Requires | DIN-LINK, powered by a DIN-PSU-100 |
| Configuration / programming method | Initial setup & programming – Via Windows / MacOS programming software (Engineer required) / Tweaks to lighting scenes and levels – Via Windows / MacOS programming software (Engineer required). Or via iOS / Android app (By end user) |
| Compatible with wall mounted keypads | Yes – A full range of wired and wireless keypads, with engraved scene buttons, available in multiple styles and finishes. Keypads sold separately. |
| Compatible with wireless infrared remotes | Yes – Infrared remotes sold separately |
| Compatible With 3rd Party Control Systems | Yes – Controllable with 3rd party control systems such as Savant, Crestron, Control 4, etc. Control systems sold separately. |
| Number of controllable circuits | 4 |
| Controllable circuit types | Volt free contact (for use with 3rd party devices eg. window treatment motors) |
| Control type | Volt free contact |
| Warranty | 2 years hardware warranty provided by Rosette Electrical |
| Load types | Curtain, screen and blind motors with open, stop and close: AC motor 230V AC; DC motor 12-24V DC; dry contact |
| Relay action | Momentary or latching, with automatic timeout |
| Maximum load | 1.5A per channel |
| Protection | Over temperature protection |
| Dimensions | W157 x H110 x D59mm |
| DIN width | 9 DIN modules |
| Weight | 275g |
| Terminal size | DIN bus: 0.5-1.5mm²; Input / load: 1.0-2.5mm² |
| Connections | DIN bus – 4-way screw terminal; Relay outputs – push terminals |
| Communication | DIN bus (8 DPU) |
| Mounting | Top hat DIN rail (IEC/EN 60715) |
| Vertical clearance | 150mm |
| Operating temperature | +2C to +40C |
| Humidity | +5% to 90% non-condensing |
| Standards | RoHS; UKCA, CE; EN 60669-2-5 |
Specification Sheets & Documents
- Rako - DIN-4C - Technical SpecificationsView PDF: Rako - DIN-4C - Technical Specifications
- Rako - DIN-4C - Instruction ManualView PDF: Rako - DIN-4C - Instruction Manual
- Rako - DIN System OverviewView PDF: Rako - DIN System Overview
- Rako - System Wiring OverviewView PDF: Rako - System Wiring Overview
- Rako - Dual Relay Wiring OverviewView PDF: Rako - Dual Relay Wiring Overview
Not sure it’s the right part?
Speak to our in-house specialists about your system, we’ll help identify the part you need.
