Lutron HomeWorks – QS Wire Landing Board – QS-WLB
The QS-WLB is a wire landing board for a Lutron QS link, which gives the link cables from the processor and each device a common place to join. It is fitted inside a low-voltage enclosure, or at the foot of a feed-through panel.
Supplied as part of a Lutron systemThe QS-WLB is part of a Lutron system that must be designed, installed and commissioned by a Lutron certified engineer. Contact our design and engineering team for a quotation.Contact our team for a quotation
- Refurbished In-House
Components repaired or replaced where needed, then cleaned and bench tested.New, Box Opened
Unused surplus stock with opened packaging. This unit is sold untested. - Specification Help
Need help with specification or compatibility? Speak to our team.
Specification
Additional information
| Manufacturer | Lutron |
|---|---|
| Range | HomeWorks QS, HomeWorks QSX |
| Model | QS-WLB |
| Product Type | Landing Boards |
| Low-voltage connections | One set of five terminal blocks, connected pin to pin. Each terminal takes up to two 1.0 mm² wires |
| Mounting | L-LV14-120, L-LV14-230, L-LV21-230, HQ-LV21-120 or HWI-PNL-8 enclosure |
| Dimensions | 102.5 × 36.8 mm |
| Environment | 0–40 °C, 0% to 90% humidity, non-condensing. Indoor use only |
Specification Sheets & Documents
- QS Wire Landing Board QS-WLB – product specifications (369-662a)View PDF: QS Wire Landing Board QS-WLB – product specifications (369-662a)
- QS Wire Landing Board – installation instructions (041890 Rev. A)View PDF: QS Wire Landing Board – installation instructions (041890 Rev. A)
Not sure it’s the right part?
Speak to our in-house specialists about your system, we’ll help identify the part you need.
