This document could not be shown here. Open the PDF.
Text of this document3 pages · 244 words
Page 1
product specifications 369-662a 08.27.12 QS Wire Landing Board The wire landing board is a wiring aid consisting of a printed circuit board with one set of five terminal blocks. Each terminal block can accept 2 up to two 18 AWG (1.0 mm ) wires and is connected pin-to-pin, to simplify wiring. The wire landing board can be installed in a low-voltage enclosure or at the bottom of a feed-through panel. QS-WLB Model Number QS-WLB QS Wire Landing Board | www.lutron.com Lutron® 1
Page 2
product specifications 369-662a 08.27.12 QS Wire Landing Board Specifications Model Number QS-WLB Low-Voltage Connections One set of five terminal blocks. Each terminal block has 5 terminals that will each accept up to two 18 AWG (1.0 mm2) wires. Environment Ambient operating temperature: 32 to 104 °F (0 to 40 °C). Ambient operating humidity: 0-90% humidity, non-condensing. Indoor use only. Mounting Mounts in the following enclosures: L-LV14-120, L-LV14-230, L-LV21-230, HQ-LV21-120, and HWI-PNL-8 Warranty www.lutron.com/TechnicalDocumentLibrary/Warranty.pdf www.lutron.com/TechnicalDocumentLibrary/Intl_Warranty.pdf Dimensions Dimensions shown as: in (mm) 1.45 (36.8) 4.036 (102.5) | Technical Support: U.S.A. 800.523.9466 2 Lutron® Europe +44.(0)20.7680.4481
Page 3
product specifications 369-662a 08.27.12 QS Wire Landing Board Configuration Example DMX Keypad(s) Sivoia® QS Shade / Drapery HomeWorks® QS GRAFIK Eye® Keypad QS control unit QS Contact Closure Interface - • • Tighten terminal blocks to 3.5 to 5 in lb (0.4 to 0.57 N m). Do not overtighten. • Terminal 5 is used to connect the QS cable shield drain wire throughout the system. | www.lutron.com Lutron® 3
Need assistance or looking to source this item?