Lutron HomeWorks – 4-Zone 0-10 V Power Module – LQSE-4T10-D
The LQSE-4T10-D is a four-zone module for use in a HomeWorks system, and each zone can be configured as a 0-10V dimming circuit or a switched circuit. Each zone has a switched mains output and a 0-10V control output. The LQSE-4S10-D is a similar module with switching only.
Supplied as part of a Lutron systemThe LQSE-4T10-D is part of a Lutron system that must be designed, installed and commissioned by a Lutron certified engineer. Contact our design and engineering team for a quotation.Contact our team for a quotation
- Refurbished In-House
Components repaired or replaced where needed, then cleaned and bench tested.New, Box Opened
Unused surplus stock with opened packaging. This unit is sold untested. - Specification Help
Need help with specification or compatibility? Speak to our team.
Specification
Additional information
| Manufacturer | Lutron |
|---|---|
| Range | HomeWorks QS, HomeWorks QSX |
| Model | LQSE-4T10-D |
| Product Type | 0-10V Modules |
| Number of zones | 4 |
| Outputs | Four switched outputs, 10 AX each, and four 0–10 V outputs, 50 mA maximum source or sink per zone |
| Power | 230 V~ 50/60 Hz, 50 mA maximum. Standby power 1 W |
| Width | 9 DIN modules (161.7 mm) |
| Dimensions | 161.7 × 89.7 mm, 60.6 mm deep |
| Mounting | IP20 (minimum) rated consumer panel or breaker panel with integrated DIN rail |
| Heat output | 4 BTU/hr fully loaded |
| Environment | 0–40 °C inside the mounting panel. Relative humidity less than 90%, non-condensing. Indoor use only |
| Standards | IEC/EN 60669-2-1, EN 50428, CE, C-Tick |
Specification Sheets & Documents
- Switching / 0–10 V Power Module LQSE-4S10-D, LQSE-4T10-D – specification submittal (369610c)View PDF: Switching / 0–10 V Power Module LQSE-4S10-D, LQSE-4T10-D – specification submittal (369610c)
- Switching / 0–10 V Power Module – installation instructions (043406)View PDF: Switching / 0–10 V Power Module – installation instructions (043406)
Not sure it’s the right part?
Speak to our in-house specialists about your system, we’ll help identify the part you need.
