Lutron HomeWorks – In-Line Dimmer – HQRK-R25NE-240
The HQRK-R25NE-240 is an in-line trailing edge dimmer for a HomeWorks system. It can dim incandescent, halogen, electronic low-voltage and LED lighting, and needs a neutral. It joins the system wirelessly through a hybrid repeater, and can also be paired directly with a Pico wireless control.
Supplied as part of a Lutron systemThe HQRK-R25NE-240 is part of a Lutron system that must be designed, installed and commissioned by a Lutron certified engineer. Contact our design and engineering team for a quotation.Contact our team for a quotation
- Refurbished In-House
Components repaired or replaced where needed, then cleaned and bench tested.New, Box Opened
Unused surplus stock with opened packaging. This unit is sold untested. - Specification Help
Need help with specification or compatibility? Speak to our team.
Specification
Additional information
| Manufacturer | Lutron |
|---|---|
| Range | HomeWorks QS, HomeWorks QSX |
| Model | HQRK-R25NE-240 |
| Product Type | Mains Power, Wireless Comms |
| Power | 220–240 V~ 50/60 Hz |
| Typical power consumption | Less than 0.5 W (load and LED off) |
| Communications | Clear Connect RF, 868 MHz (UK). Within 9 m of a hybrid repeater |
| Wiring | 0.5–2.5 mm² wires; cable outside diameter 5.2–8.5 mm |
| Dimensions | 153 × 46 × 32 mm |
| Mounting | Keep insulation and heat sources 120 mm away; not inside metal enclosures or metal ceilings |
| Environment | 0–40 °C, 0% to 90% humidity, non-condensing. Indoor use only |
| Regulatory approvals | CE |
| Dimming type | Trailing edge |
| Load ratings | 1 A, 250 W incandescent, halogen, ELV; 1 A, 150 W LED |
Specification Sheets & Documents
- HomeWorks In-Line Load Controls – product specifications (3691084f)View PDF: HomeWorks In-Line Load Controls – product specifications (3691084f)
- HomeWorks In-Line Dimmer, Switch and Fan Control – installation instructions (043613 Rev. A)View PDF: HomeWorks In-Line Dimmer, Switch and Fan Control – installation instructions (043613 Rev. A)
Not sure it’s the right part?
Speak to our in-house specialists about your system, we’ll help identify the part you need.
