Lutron HomeWorks – 4-Output Motor Control Power Module – LQSE-4M-D

The LQSE-4M-D is a four-output motor control module for use in a HomeWorks system. Each output gives raise and lower control of one AC motor, such as a blind, shade, louvre or projection screen.

Supplied as part of a Lutron systemThe LQSE-4M-D is part of a Lutron system that must be designed, installed and commissioned by a Lutron certified engineer. Contact our design and engineering team for a quotation.Contact our team for a quotation

Quantity

Specification

Additional information

Manufacturer	Lutron
Range	HomeWorks QS, HomeWorks QSX
Model	LQSE-4M-D
Product Type	Motor Control Modules
Outputs	Four independently controllable AC raise / lower outputs from one common AC feed, for blinds, shades, louvres, projection screens or other compatible AC motors
Output capacity	1.5 A maximum motor load per output; one motor per output. Not for lighting
Power	230 V~ 50/60 Hz, 6 A maximum total input current. Standby power 660 mW
QS link	Counts as 4 zones and 1 device. Neither supplies nor consumes power draw units
Presets	Open, Close and Unaffected only
Width	9 DIN modules (161.7 mm)
Dimensions	161.7 × 89.7 mm, 60.6 mm deep
Mounting	IP20 (minimum) rated consumer panel or breaker panel with integrated DIN rail
Heat output	5 BTU/hr fully loaded
Environment	0–40 °C inside the mounting panel. Relative humidity less than 90%, non-condensing. Indoor use only
Standards	IEC/EN 60669-2-1, EN 50428