Lutron Energi Savr Node – Phase Adaptive Power Module – QSNE-4A-D
The QSNE-4A-D is a four-zone phase adaptive dimming module for use in an Energi Savr Node or Lutron Quantum system. Each zone can be configured to the load type, and four inputs take occupancy and daylight sensors, IR receivers or wall switches. It can be programmed from its own buttons, or through the QSE-CI-AP-D interface.
Legacy product familyThis is a legacy product family. We still have some stock of this family, please contact us to discuss your requirements.Contact us to discuss your requirements
- Refurbished In-House
Components repaired or replaced where needed, then cleaned and bench tested.New, Box Opened
Unused surplus stock with opened packaging. This unit is sold untested. - Specification Help
Need help with specification or compatibility? Speak to our team.
Specification
Additional information
| Manufacturer | Lutron |
|---|---|
| Range | Energi Savr Node |
| Model | QSNE-4A-D |
| Product Type | Mains Dimming Modules |
| Number of zones | 4 |
| Power | 220–240 V~ 50/60 Hz, 10 A maximum total input current |
| Dimming type | Leading and trailing edge |
| Load ratings | Zone 1: 800 W incandescent / halogen and ELV, 800 VA (600 W) MLV and neon / cold cathode. Zones 2–4, each: 500 W incandescent / halogen and ELV, 500 VA (375 W) MLV and neon / cold cathode. No derating with room ambient 0–30 °C. No minimum load |
| Load control | Automatically selects leading-edge or trailing-edge dimming, or can be set manually for a specific load type. One load type per zone. Internal relay gives an air-gap off when all zones are off |
| Inputs | Four multi-function inputs for daylight sensors, occupancy sensors, IR receivers or IEC PELV / NEC Class 2 dry contact switches. Emergency contact closure input |
| QS link | Supplies 4 power draw units (PDUs), 24 V DC 132 mA |
| Programming | Buttons on the unit (one unit and no more than one QS sensor module on the link); the Energi Savr app on an iPhone or iPod touch through a QSE-CI-AP-D programming interface; or the Quantum software with a Quantum processor |
| Width | 12 DIN modules (216 mm) |
| Dimensions | 216 × 90 mm, 76 mm deep |
| Mounting | IP20 (minimum) rated consumer panel or breaker panel with integrated DIN rail. Room ambient 0–30 °C; 0–50 °C inside the panel within 20 mm of the unit |
| Heat output | 75 BTU/hr maximum |
| Environment | Relative humidity less than 90%, non-condensing. Indoor use only |
Specification Sheets & Documents
- Energi Savr Node QS Phase Adaptive Fixture Controller QSNE-4A-D – specification submittal (369609f)View PDF: Energi Savr Node QS Phase Adaptive Fixture Controller QSNE-4A-D – specification submittal (369609f)
- EU and UK declarations of conformity 900352 – QSNE-4A-D and LQSE-4A-DView PDF: EU and UK declarations of conformity 900352 – QSNE-4A-D and LQSE-4A-D
Not sure it’s the right part?
Speak to our in-house specialists about your system, we’ll help identify the part you need.
