Rako WAVFR Technical Specifications

Page 1

Datasheet WAVFR 10-Way Wired Switch Interface What is the WAVFR? Technical Data The WAVFR is a 10-way volt-free interface programmable Dimensions 190x105x66mm via Rasoft Pro using a WK-HUB communication device. Input Supply 15V DC via RAK-LINK Each input can be programmed to its own Room and Weight 340g Channel. Each input has two states, ‘On Make’ and ‘On Housing UL94-V0 Break’ which can be programmed to trigger an output command. Connections Switch inputs - 10-way terminal Features Switch common - 3-way terminal Punch down connector • Multi-room control RJ11 port • Up to ten inputs Cable 1 x 2-core cable per input • Customisable output commands Do not use multi-core cables Maximum cable run: 100M - Scenes (1-16) Climate Range Temperature +2C to +40C - Level (0-100%) Humidity +5% to 95% - Fade up/Fade down non-condensing - Off Standards RoHS - Toggle UKCA, CE EN 60669-2-5:2016 - Whole house On/Off Communication CAN Connections/Dimensions Installation and Setup For information on installing and setting up the WAVFR, see the WAVFR Manual. Document Version 2.0.0 telephone +44 (0) 1634 226666 | www.rakocontrols.com WE RESERVE THE RIGHT TO CHANGE THE SPECIFICATION AND DATA HEREWITH WITHOUT NOTICE. © 2024 RAKO CONTROLS LIMITED