Rako RMR-VF Technical Specifications

Page 1

Datasheet RMR-VF 10-Way Wireless Switch Interface What is the RMR-VF? Technical Data The RMR-VF is a 10-way volt free interface programmable Dimensions 190x105x66mm via Rasoft Pro using a programming device such as a RAMPI Input Supply 12V DC (PSU supplied) or HUB. Weight 340g Each input can be programmed to its own Room and Housing UL94-V0 Channel. Each input has two states, ‘On make’ and ‘On Break’ which can be programmed to trigger an output Connections Switch inputs - 10-way terminal command. Switch common - 3-way terminal Concentric jack Features Cable 1 x 2-core cable per input • Multi-room control Do not use multi-core cables Maximum cable run: 100M • Up to ten inputs Climate Range Temperature +2C to +40C • Customisable output commands Humidity +5% to 95% - Scenes (1-16) non-condensing - Level (0-100%) Standards RoHS - Fade up/Fade down UKCA, CE EN 60669-2-5:2016 - Off Communication FM radio, 433.9MHz - Toggle - Whole house On/Off Installation and Setup Connections/Dimensions For information on installing and setting up the RMR-VF, see the RMR-VF Manual. Document Version 2.0.0 telephone +44 (0) 1634 226666 | www.rakocontrols.com WE RESERVE THE RIGHT TO CHANGE THE SPECIFICATION AND DATA HEREWITH WITHOUT NOTICE. © 2024 RAKO CONTROLS LIMITED