This document could not be shown here. Open the PDF.
Text of this document11 pages · 1,730 words
Page 1
product specifications 3691310b 07.17.26 Aviena Keypad The Aviena keypad allows the user to control lights, shades / draperies, temperature, and third-party equipment. The keypad is designed to work with Lutron HomeWorks QSX series processors through the wired QS link. Aviena keypads are simple and intuitive, with an evocative heritage design. Center retractable, momentary toggle switches are configurable through the HomeWorks software. Features • Faceplate snaps on with no visible means of attachment. • Optional custom text or icon engraving. • Simplify programming by having separate functions for a “quick” toggle-switch command vs. an extended (push-&-hold) toggle-switch command • Includes quick-connect wiring harness to simplify installation. • Contact closure and wiring harness ship separately so that the system may be programmed before the keypad arrives. Finishes See the Finishes section at the end of this document. Customer Assistance: 1.844.LUTRON1 (U.S.A. / Canada) www.lutron.com/support 1 +44(0)20.7702.0657 (UK & Europe)
Page 2
product specifications 3691310b 07.17.26 Aviena Keypad Specifications Power Input Power • Operating voltage: 24–36 V- 30 mA (HW-QS-ACI), 20 mA (Keypad) • Low-voltage SELV / PELV / NEC® Class 2 wiring provides power, derived from the QS link. Consumes one Power Draw Unit (PDU). For complete information, see “Power Draw Units on the QS link” (Lutron P / N 369405) at www.lutron.com Regulatory Lutron Quality Systems registered to ISO 9001:2015. cULus, UKCA, CE, NOM, FCC, Approvals ICES-003, and RoHS Compliant Environment Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C), 0% to 90% non-condensing relative humidity. Indoor use only. IP20 Rating. ADA Standard Control operation complies with ADA standards for an accessible design. ESD Protection Meets IEC 801-2. Tested to withstand 15 kV electrostatic discharge without damage or memory loss. Power Failure Power failure memory: Should power be interrupted, the keypad will return to its previous state when power is restored. Mounting Requires European-style, square/rectangular backboxes: 1-Gang: 2.95 in H x 2.95 in W (75 mm H x 75 mm W) 2-Gang: 2.95 in H x 5.31 in W (75 mm H x 135 mm W) Recommended backbox depth is 2.36 in (60 mm) See Mounting on page 10 for more details. Wiring and SELV / PELV / NEC® Class 2 - see pages 7 and 8 for details Terminals Limited www.lutron.com/warranty or call 1.844.LUTRON1 for a printed copy. Warranty Customer Assistance: 1.844.LUTRON1 (U.S.A. / Canada) www.lutron.com/support 2 +44(0)20.7702.0657 (UK & Europe)
Page 3
product specifications 3691310b 07.17.26 Aviena Keypad Dimensions Keypad 1-Gang 2-Gang (horizontal) 2-Gang (vertical) 3.55 in 3.55 in (90.2 mm) (90.2 mm) 5.93 in (150.5 mm) 3.55 in (90.2 mm) 5.93 in (150.5 mm) 3.55 in (90.2 mm) Closure Interface Front View Side View Back View ® 1.875 in 2.375 in (47 mm) (60 mm) MUX MUX V+ COM 4 3 2 1 2.0625 in 0.8125 in (52 mm) (21 mm) Customer Assistance: 1.844.LUTRON1 (U.S.A. / Canada) www.lutron.com/support 3 +44(0)20.7702.0657 (UK & Europe)
Page 4
product specifications 3691310b 07.17.26 Aviena Keypad Configurations 1-Gang Configurations 1-Toggle 2-Toggle 4-Toggle 2-Gang (Horizontal) Configurations 3-Toggle 4-Toggle 2-Gang (Vertical) Configurations 3-Toggle Customer Assistance: 1.844.LUTRON1 (U.S.A. / Canada) www.lutron.com/support 4 +44(0)20.7702.0657 (UK & Europe)
Page 5
product specifications 3691310b 07.17.26 Aviena Keypad Model Numbers HW – AV – KP – S - E System Type Device Engraving HW: HomeWorks KP: Keypad E: Engraved Blank: Non-Engraved Family Adapter AV: Aviena S: 1-Gang H: 2-Gang Horizontal V: 2-Gang Vertical Notes: a. Configurations (number of switches) and metal finishes to be specified in myProjects. b. Contact closure input (HW-QS-ACI) is added in myProjects and is not sold separately. Customer Assistance: 1.844.LUTRON1 (U.S.A. / Canada) www.lutron.com/support 5 +44(0)20.7702.0657 (UK & Europe)
Page 6
product specifications 3691310b 07.17.26 Aviena Keypad Engraving Options The Aviena keypad has engraving options ideal for many scenarios. Predefined Custom Engraving Engraving to be specified in myProjects. One icon or line of text is available above and below each switch in each configuration. Engraving must be defined at time of order. Note: Keypad orders cannot be manufactured until engraving information is received. No Engraving No engraving is for instances when the customer would like to maintain the clean look of the keypad. To specify this option, leave the engraving code of the keypad model number blank. Engraving Ink Standard Every Aviena keypad finish has a specific engraving ink that is chosen to compliment the finish while also allowing the engraving to be readable. Enhanced Readability Aged Aviena keypad finishes (Bronze and Brass) offer two engraving ink options. One that provides higher contrast for “Enhanced Readability” and a “Standard” that is more subtle. The aged finish engraving ink option is chosen when configuring the product using “Backfill Contrast” in myProjects. Customer Assistance: 1.844.LUTRON1 (U.S.A. / Canada) www.lutron.com/support 6 +44(0)20.7702.0657 (UK & Europe)
Page 7
product specifications 3691310b 07.17.26 Aviena Keypad QS Link Wiring • Use SELV / PELV / NEC® Class 2 wiring to • Each base unit of a QS wired Aviena Keypad connect keypads to the QS link. consumes 1 power draw unit (PDU) on the 2 QS link. For complete information, see • Connect two 22 AWG (0.5 mm ) shielded, “Power Draw Units on the QS Link” twisted pairs of wires to terminals 3 and 4 of (Lutron P/N 369405) at www.lutron.com the keypad control link connector. Shielding (drain) of the twisted-pair wires must be Note: Use appropriate wire connecting connected together as shown, but do not devices as specified by local codes. connect the shielding to earth / ground or to the keypad and do not allow the shielding to Link Wiring (<500 ft/153 m) contact the grounded backbox. Data Link: • The total length of wire on a QS wired link is (1) twisted, shielded pair 2 not to exceed 2000 ft (610 m). 22 AWG (0.5 mm ) D: drain / shield 3: MUX • Each base unit model number counts as 4: MUX 1 device on the QS link. 4 3 2 QS Link Wiring (2) 18 AWG 1 2 (1.0 mm ) QS Wiring (2) 18 AWG SELV / PELV / NEC® Class 2 2 (1.0 mm ) Control wiring 2 g (2) 18 AWG (1.0 mm ) 1: Common irin ® 2: V+ W k Link Wiring (500 ft/153 m to 2000 ft/610 m) in MUX MUX V+ COM L 4 3 2 1 Data Link: S (1) twisted, shielded pair Q 2 22 AWG (0.5 mm ) 3: MUX MUX (White) 4: MUX 4 MUX (Purple) 3 (2) 12 AWG 2 V+ (Red) 2 (4.0 mm ) 1 COM (Black) (2) 12 AWG 2 (4.0 mm ) SELV / PELV / NEC® Class 2 Control wiring 2 (2) 18 AWG (1.0 mm ) 1: Common QS Link Wire Sizes (check compatibility in your area) 2: V+ Wiring Length Wire Gauge Lutron Cable Part Number Power (terminals 1 and 2) 2 1 pair 18 AWG (1.0 mm ) QS-CBL-LSZH (low-smoke zero halogen) Less than 500 ft (153 m) GRX-CBL-346S (non-plenum) Data (terminals 3 and 4) GRX-PCBL-346S (plenum) 2 1 twisted, shielded pair 22 AWG (0.5 mm ) Power (terminals 1 and 2) 2 500 ft to 2000 ft 1 pair 12 AWG (4.0 mm ) GRX-CBL-46L (non-plenum) (153 m to 610 m) GRX-PCBL-46L (plenum) Data (terminals 3 and 4) 2 1 twisted, shielded pair 22 AWG (0.5 mm ) Customer Assistance: 1.844.LUTRON1 (U.S.A. / Canada) www.lutron.com/support 7 +44(0)20.7702.0657 (UK & Europe)
Page 8
product specifications 3691310b 07.17.26 Aviena Keypad Keypad Wiring Wire Harness Connectors Switch 1 Switch 2 Switch 3 Switch 4 HW-QS-ACI Wire Harness Keypad (Ships with the HW-QS-ACI) Configuration Diagram of which wire harness connector attaches and programs to which switch 1-Gang 1-Toggle Switch 1 1-Gang 2-Toggle Switch 1 Switch 2 1-Gang 4-Toggle Switch 1 Switch 3 Switch 2 Switch 4 2-Gang (Horizontal) 3-Toggle Switch 1 Switch 3 Switch 2 2-Gang (Horizontal) Switch 1 Switch 3 4-Toggle Switch 2 Switch 4 2-Gang (Vertical) 3-Toggle Switch 1 Switch 2 Switch 3 Customer Assistance: 1.844.LUTRON1 (U.S.A. / Canada) www.lutron.com/support 8 +44(0)20.7702.0657 (UK & Europe)
Page 9
product specifications 3691310b 07.17.26 Aviena Keypad Mounting Requires European-style, square/rectangular backboxes: 1-Gang: 2.95 in H x 2.95 in W (75 mm H x 75 mm W) 2-Gang: 2.95 in H x 5.31 in W (75 mm H x 135 mm W) Recommended backbox depth is 2.36 in (60 mm) Custom backboxes are available for both 1-gang and 2-gang configurations: 1-Gang: EBB-1-SQ-LV 2-Gang: EBB-1-TW-LV A flangeless backbox is recommended for the most flush installation possible. Backboxes must be installed with the sides flush with or slightly inset to the wall surface. Customer Assistance: 1.844.LUTRON1 (U.S.A. / Canada) www.lutron.com/support 9 +44(0)20.7702.0657 (UK & Europe)
Page 10
product specifications 3691310b 07.17.26 Aviena Keypad Finishes Aged Brass Aged Bronze Brushed Brass Satin Nickel Bright Chrome AB AZ BRB SN BC • Aged Brass and Aged Bronze finishes produce a unique variation in both the hue and the graining. There will be natural variation from unit to unit. • Due to printing limitations, finishes shown cannot be guaranteed to perfectly match actual product colors. • Keychains are available for more precise matching: - Signature Metal Chip Kit Demo: SM-CK-DEMO Customer Assistance: 1.844.LUTRON1 (U.S.A. / Canada) www.lutron.com/support 10 +44(0)20.7702.0657 (UK & Europe)
Page 11
product specifications 3691310b 07.17.26 Aviena Keypad Terms & Definitions Toggle Switch A type of switch activated by pushing up or down (NOT INTO the keypad). Button Switch A type of switch activated by pushing it INTO the keypad. Note that button-switches are NOT part of the Aviena product offering. Momentary Switch A type of switch that is activated while pushed; then deactivated when released. Latched Switch A type of switch that is activated when pushed, and remains activated when released (until pushed again). Latched switches are NOT part of the Aviena product offering. Center Retractable Switch A type of switch that returns to its original position when released. Keypad A device containing switches that communicates to a system. In Aviena, the keypad contains center retractable, momentary, toggle switches that connect to a CCI. Contact Closure Input (CCI) A digital input that detects when a switch is activated. In Aviena, the CCI ships separately from the keypad, connects to the keypad via an included wiring harness, and communicates to a HomeWorks QSX system via the wired QS link. Lutron, Aviena, HomeWorks, and any related trade dress and logos are trademarks or registered trademarks of Lutron Electronics Co., Inc. in the US and/or other countries. All other product names, logos, and brands are property of their respective owners. Customer Assistance: 1.844.LUTRON1 (U.S.A. / Canada) www.lutron.com/support 11 +44(0)20.7702.0657 (UK & Europe)
Need assistance or looking to source this item?