Future Automation TSLM-MO-3 technical sheet

Page 1

TSLM-MO-3 MARINE OUTDOOR TELESCOPIC SCREEN LIFT TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 003 WWW NET . . SHEET 1 FUTUREAUTOMATION

Page 2

TSLM-MO-3 MARINE OUTDOOR TELESCOPIC SCREEN LIFT SPECIFICATION MEASUREMENTS Product Dimensions 892mm (35 1/8") x 1280mm (50 3/8") x 240mm (9 7/16") Minimum Screen Height 850mm (33 7/16") Maximum Screen Height 1175mm (46 1/4") Minimum Screen Width 1280mm (50 3/8") - (Lower Width option available apon request) Maximum Weight Capacity 75Kg (165lb) (Screen + Enclosure) Product Weight 45Kg (99lb) Packaging Dimensions TBC Shipping Weight TBC Movement Type Motorised Power Supply Required 110V - 240V Power Consumption Max. 250W Power Consumption Standby 3W Mounting Patterns Supported VESA 200, 300, 400 W x 200, 300, 400 H - (Other VESA patterns apon request) Control Options IR Remote, RS232, Contact Closure Product Options / Features Specific B&O and Loewe mounts / adapters, Custom RAL paint finishes, Outdoor suitable version Package Contents Mechanism, IR remote control Marine Suitable YES Outdoor Suitable YES TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 003 WWW NET . . SHEET 2 FUTUREAUTOMATION

Page 3

TSLM-MO-3 MARINE OUTDOOR TELESCOPIC SCREEN LIFT GENERAL INFORMATION VESA 400 wide mounting LID and ENCLOSURE - To be made by pattern covered. Brackets others. Total allowable weight for all have full height adjustment . timber work and the screen 75Kg. The lid must be easily removed if the mechanism was stuck in the down position. A lift off arrangement being ideal. The fixings for the screen are then accessible so it can then be lifted off to give access to the motor. Screen cables enter here. Screen cables enter here. TRIM PANEL - Not supplied. This trim panel is lifted up as Front access is required to install the lift. the screen is lowered into the cabinet. Brackets are Allow 20mm+ in front of the screen if supplied to attach it. the mechanism is to be partially sunk below floor level. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 003 WWW NET . . SHEET 3 FUTUREAUTOMATION

Page 4

TSLM-MO-3 MARINE OUTDOOR TELESCOPIC SCREEN LIFT CABINET SIZING All sizing calculations are based off a 20mm [0.79"] Internal Cabinet Depth = Screen Depth + 230 [9 1/16"] box enclosure panel thickness. Any increases in this thickness will increase the required space. 13/16" 20 Recomended Cap Detail to prevent Box Enclosure Depth = Box Enclosure water entering the cabinet Screen Depth + 100 [3 15/16"] A Cap Height B B C 3 11/16" Screen DETAIL C 93 SCALE 1 : 3 Depth Back of Cabinet to Aperture Aperture Depth = Screen Depth + 116 [4 9/16"] A SECTION B-B SCALE 1 : 8 Screen Height Min. 850 [33 7/16"] Max. 1175 [46 1/4"] 13/16" 20 888 34 15/16" Box Enclosure Height = Screen Height + 30 [1 3/16"] Internal Cabinet Height = Screen Height + 55 [2 3/16"] Mechanism Back Tray Height Screen Width Box Enclosure Width = Screeen Width + 50 [1 15/16"] Aperture Width = Screeen Width + 66 [2 5/8"] Internal Cabinet Width = Screen Width + 100 [3 15/16"] TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 003 WWW NET . . SHEET 4 FUTUREAUTOMATION SECTION A-A SCALE 1 : 8

Page 5

TSLM-MO-3 MARINE OUTDOOR TELESCOPIC SCREEN LIFT BOX ENCLOSURE DETAILING 13/16" 20 The Screen, Enclosure, Lid and the Trim Lid Thickness panel must weigh no more than 75Kg. Blocks to locate lid. Optional ventilation Fixing Brackets 25 3/16" 640 44 7/8" 1140 D D 31 7/8" 810 11 13/16" 22 1/16" 300 560 Trim Panel 1/2" 12 22 13/16" 1/4" 580 7 13/16" 20 23 5/8" 3 9/16" 600 90 SECTION D-D 13 3/8" 340 Enclosure also fixed along here TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 003 WWW NET . . SHEET 5 FUTUREAUTOMATION

Page 6

TSLM-MO-3 MARINE OUTDOOR TELESCOPIC SCREEN LIFT INSTALL INSTRUCTIONS F Mount fixing bolts Check that the cabinet, enclosure, lid and the trim panel are made to the details shown on the previous pages. • You can stand the mechanism up on its base to test it before putting in the cabinet. See control document for details. Use the IR remote with caution and always cover the STOP button in case of issues. Mount bracket • Centrally fix the mechanism to the back of the cabinet in the places shown. Enclosure • Run up and down and then add the enclosure. • Adjust the position of the enclosure and adjust the up and down switches with caution. Temporarily add lid to check height. • Run screen cables up into enclosure. Secure cables as they enter and leave the cable tracks with cable ties. Make sure no cables can get tangled or caught as the Trim Panel Fixing holes mechanism moves. • Add trim panel. And adjust. This trim panel moves up into position as the TV lifts. Observe this movement and Either or both Up Switch cable tracks can understand it before fixing. be used. • The upright plate can be adjusted in height by moving it Down Switch to a different set of keyholes. Fix the plate to the back of the screen and mount to mechanism using the keyholes. Ensure the plate is secured using the fixing bolts located at the top of the keyhole plates. Fixing holes • Check movement with screen with caution. SECTION F-F F TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 003 WWW NET . . SHEET 6 FUTUREAUTOMATION

Page 7

TSLM-MO-3 MARINE OUTDOOR TELESCOPIC SCREEN LIFT 9 1/4" 6 11/16" 5 1/16" 235 169.6 128 1/16" R2.25 POWER SUPPLY UNIT INPUT = 110V (6A) OR 240V (3A) AC MAINS OUTPUT = 24V DC, 21A

315 249.6 FUTURE AUTOMATION 12 3/8" 9 13/16"

UDC3 CONTROL BOARD 9 7/8" 251.5 3 CORE CABLE IR RECEIVER 3mm [0.12"] dia. EU SPEC: 0.12mm² US SPEC: 25AWG 118 1/8" 3000 3 CORE CABLE CABLE LOOM SWITCH LIMITS LENGTH APPROX. 6mm [0.25"] dia. EU SPEC: 0.2mm² US SPEC: 24AWG 6 CORE CABLE 2 CORE CABLE MAINS SUPPLY LIFTING MOTOR 4.5mm [0.25"] dia. 10mm [0.4"] dia. EU SPEC: 0.2mm² NOTES EU SPEC: 1.5mm² US SPEC: 24AWG • ENCLOSURE AND CABLE GLANDS RATED TO IP56. US SPEC: 16AWG • ENCLOSURE AND LID FIXINGS ALL MADE FROM GEWISS GW PLAST 75. • C TO -25 C. ENCLOSURE MATERIAL SUITABLE FOR TEMPERATURES +60 • POWER SUPPLY UNIT (PSU) WILL ALLOW 110V OR 240V AC INPUT. THE SAME PSU IS USED FOR EU OR US MAINS SUPPLIES. • OTHER THAN CONTROL CABLES, ALL CABLES TERMINATE AT CONTROL BOARD VIA STANDARD PHOENIX CONNECTORS. • CABLE LOOM LENGTH SUPPLIED AT APPROX. 3m [118"]. LOOM CAN BE EXTENDED UP TO MAXIMUM OF APPROX. 10m [400"]. • MINIMUM CABLE BEND RADIUS 25mm [1"]. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 003 WWW NET . . SHEET 7 FUTUREAUTOMATION