Future Automation TSLM-MO-2 technical sheet

Page 1

TSLM-MO-2 MARINE OUTDOOR TELESCOPIC SCREEN LIFT TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 003 WWW NET . . SHEET 1 FUTUREAUTOMATION

Page 2

TSLM-MO-2 MARINE OUTDOOR TELESCOPIC SCREEN LIFT SPECIFICATION MEASUREMENTS Product Dimensions 742mm (29 3/16") x 1280mm (50 3/8") x 240mm (9 7/16")

Minimum Screen Height 695mm (27 3/8") Maximum Screen Height 875mm (34 7/16") Minimum Screen Width 1280mm (50 3/8") - (Lower Width option available apon request) Maximum Weight Capacity 75Kg (165lb) (Screen + Enclosure) Product Weight 40Kg (88lb) Packaging Dimensions TBC Shipping Weight TBC Movement Type Motorised Power Supply Required 110V - 240V Power Consumption Max. 250W Power Consumption Standby 3W Mounting Patterns Supported VESA 200, 300, 400 W x 200, 300, 400 H - (Other VESA patterns apon request) Control Options IR Remote, RS232, Contact Closure Product Options / Features Specific B&O and Loewe mounts / adapters, Custom RAL paint finishes, Outdoor suitable version Package Contents Mechanism, IR remote control Marine Suitable YES Outdoor Suitable YES TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 003 WWW NET . . SHEET 2 FUTUREAUTOMATION

Page 3

TSLM-MO-2 MARINE OUTDOOR TELESCOPIC SCREEN LIFT GENERAL INFORMATION VESA 200, 300 & 400 LID and ENCLOSURE - To be made by mounting patterns covered. others. Total allowable weight for all Bracket has full height timber work and the screen 75Kg. adjustment . The lid must be easily removed if the mechanism was stuck in the down position. A lift off arrangement being Screen cables ideal. The fixings for the screen are enter here. then accessible so it can then be lifted off to give access to the motor. Screen cables enter here. Front access is required to install the lift. Allow 20mm+ in front of the screen if the mechanism is to be partially sunk below floor level. TRIM PANEL - Not supplied. This trim panel is lifted up as the screen is lowered into the cabinet. Brackets are supplied to attach it. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 003 WWW NET . . SHEET 3 FUTUREAUTOMATION

Page 4

TSLM-MO-2 MARINE OUTDOOR TELESCOPIC SCREEN LIFT CABINET SIZING All sizing calculations are based off a 20mm [0.79"] box enclosure panel thickness. Any increases in this thickness will increase the required space. Internal Cabinet Depth = Screen Depth + 230 [9 1/16"] 13/16" 20 Box Enclosure Depth = Box Enclosure A Recomended Cap Detail to prevent Screen Depth + 100 [3 15/16"] Cap Height water entering the cabinet B B C Screen DETAIL C 3 11/16" Depth SCALE 1 : 3 93 Back of Cabinet to Aperture Aperture Depth = Screen Depth + 116 [4 9/16"] A SECTION B-B SCALE 1 : 7 Screen Height Min. 695 [27 3/8"] Max. 875 [34 7/16"] 738 29 1/16" 13/16" 20 Mechanism Back Tray Height Box Enclosure Height = Screen Height + 30 [1 3/16"] Internal Cabinet Height = Screen Height + 55 [2 3/16"] Screen Width SECTION A-A Box Enclosure Width = Screeen Width + 50 [1 15/16"] SCALE 1 : 7 Aperture Width = Screeen Width + 66 [2 5/8"] Internal Cabinet Width = Screen Width + 100 [3 15/16"] TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 003 WWW NET . . SHEET 4 FUTUREAUTOMATION

Page 5

TSLM-MO-2 MARINE OUTDOOR TELESCOPIC SCREEN LIFT BOX ENCLOSURE DETAILING The Screen, Enclosure, Lid and the Trim panel must weigh no more than 75Kg. Blocks to locate lid. Fixing Brackets Optional ventilation 25 3/16" 640 44 7/8" 1140 D D 26" 660 22 1/16" 11 13/16" 560 300 Trim Panel 1/2" 12 22 13/16" 1/4" 580 7 13/16" 20 3 9/16" 23 5/8" 90 600 13 3/8" SECTION D-D 340 Enclosure also fixed along here TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 003 WWW NET . . SHEET 5 FUTUREAUTOMATION

Page 6

TSLM-MO-2 MARINE OUTDOOR TELESCOPIC SCREEN LIFT INSTALL INSTRUCTIONS F Mount fixing bolts • Check that the cabinet, enclosure, lid and the trim panel are made to the details shown on the previous pages. • You can stand the mechanism up on its base to test it before putting in the cabinet. See control document for details. Use the IR remote with caution and always cover the STOP button in case of issues. • Centrally fix the mechanism to the back of the cabinet in Mount bracket the places shown. Enclosure • Run up and down and then add the enclosure. • Adjust the position of the enclosure and adjust the up and down switches with caution. Temporarily add lid to check height. • Run screen cables up into enclosure. Secure cables as they enter and leave the cable tracks with cable ties. Make sure no cables can get tangled or caught as the mechanism moves. Trim Panel Fixing holes • Add trim panel. And adjust. This trim panel moves up into position as the TV lifts. Observe this movement and understand it before fixing. Either or both Up Switch cable tracks can be used. • The upright plate can be adjusted in height by moving it to a different set of keyholes. Fix the plate to the back of Down Switch the screen and mount to mechanism using the keyholes. Ensure the plate is secured using the fixing bolts located at the top of the keyhole plates. • Check movement with screen with caution. Fixing holes SECTION F-F F TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 003 WWW NET . . SHEET 6 FUTUREAUTOMATION

Page 7

TSLM-MO-2 MARINE OUTDOOR TELESCOPIC SCREEN LIFT 9 1/4" 6 11/16" 5 1/16" 235 169.6 128 1/16" R2.25 POWER SUPPLY UNIT INPUT = 110V (6A) OR 240V (3A) AC MAINS OUTPUT = 24V DC, 21A

315 249.6 FUTURE AUTOMATION 12 3/8" 9 13/16"

UDC3 CONTROL BOARD 9 7/8" 251.5 3 CORE CABLE IR RECEIVER 3mm [0.12"] dia. EU SPEC: 0.12mm² US SPEC: 25AWG 118 1/8" 3000 3 CORE CABLE CABLE LOOM SWITCH LIMITS LENGTH APPROX. 6mm [0.25"] dia. EU SPEC: 0.2mm² US SPEC: 24AWG 6 CORE CABLE 2 CORE CABLE MAINS SUPPLY LIFTING MOTOR 4.5mm [0.25"] dia. 10mm [0.4"] dia. EU SPEC: 0.2mm² NOTES EU SPEC: 1.5mm² US SPEC: 24AWG • ENCLOSURE AND CABLE GLANDS RATED TO IP56. US SPEC: 16AWG • ENCLOSURE AND LID FIXINGS ALL MADE FROM GEWISS GW PLAST 75. • C TO -25 C. ENCLOSURE MATERIAL SUITABLE FOR TEMPERATURES +60 • POWER SUPPLY UNIT (PSU) WILL ALLOW 110V OR 240V AC INPUT. THE SAME PSU IS USED FOR EU OR US MAINS SUPPLIES. • OTHER THAN CONTROL CABLES, ALL CABLES TERMINATE AT CONTROL BOARD VIA STANDARD PHOENIX CONNECTORS. • CABLE LOOM LENGTH SUPPLIED AT APPROX. 3m [118"]. LOOM CAN BE EXTENDED UP TO MAXIMUM OF APPROX. 10m [400"]. • MINIMUM CABLE BEND RADIUS 25mm [1"]. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 003 WWW NET . . SHEET 7 FUTUREAUTOMATION