Future Automation PICSPLIT2 technical sheet

Page 1

EDIT CUSTOM PROPERTIES 29. TITLE TO DESIRED PIC SP 2 PRODUCT CODE PICTURE SPLIT MECHANISM 30. SUBHEADING TO DESIRED PRODUCT DESCRIPTION EDIT CUSTOM PROPERTIES TECHNICAL SHEET 31. ISSUE NO. UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 TO DESIRED ISSUE NUMBER WWW NET . . SHEET 1 FUTUREAUTOMATION

Page 2

PIC SP 2 PICTURE SPLIT MECHANISM SPECIFICATION MEASUREMENTS Maximum Screen Size 55" (1397mm) Maximum Weight Capacity 15Kg (33lb) per Panel Maximum Speed 120mm/s Maximum Travel 1400mm (55.2") Depth From Wall 50mm (2.0") Product Weight 16Kg (35.3lb) per Mechanism Packaging Dimensions 96cm x 26cm x 85cm (37.79" x 10.23" x 33.46") Shipping Weight 54Kg Movement Type Motorised Power Supply Required 110V - 240V AC Power Consumption Max. 110W Power Consumption Standby 3W Control Options IR Remote, RS232, Contact Closure Product Options / Features Custom RAL paint finishes Package Contents Mechanism, IR remote control Marine Suitable No TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 2 FUTUREAUTOMATION

Page 3

PIC SP 2 PICTURE SPLIT MECHANISM Fully lined recess for the screen. The RECESS DETAILS front of the screen can be flush with the wall surface or set slightly back. CABLES: During installation, cables between the two mechanisms shall be required to run to a suitable storage location; connecting to the control box (308[12.2] x 150[5.9] x 52[2.1]). O A nominal 40mm[1.6] cable entry/exit hole is recommended to provide suitable access for cable routing. 3/8" 10 The control box shall need to be connected into a mains (13A) plug socket. An infrared receiver on a 1.5m[59.1] lead is also plugged into the control box. PANELS: The moving panels shall be 10mm[0.4] proud of the wall surface. NOTE: 1400mm[55.2] is the widest recess this version of the mechanism can cover. This dimension can be reduced for small recesses but not increased. 55 1/8" 1400 57 1/16" 1450 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 3 FUTUREAUTOMATION O SECTION O-O

Page 4

PIC SP 2 PICTURE SPLIT MECHANISM 1 3/4" 45 PANEL DETAILS These are suggested dimensions for the panels. The panels must have an internal depth of 45mm to conceal the mechanism; as shown in DETAIL B. 1" 25 55 1/8" 1400 DETAIL B 33 7/16" 850 35 7/16" 900 A B 33 7/16" 35 7/16" 850 900 55 1/8" 1400 126" 3200 SECTION A-A A TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 4 FUTUREAUTOMATION

Page 5

PIC SP 2 PICTURE SPLIT MECHANISM D PANEL MOUNTING DETAILS C Panel mount plates hook onto two bolts. The height of the bolts can be DETAIL D adjusted to ensure the panels are level. One side of Picture Split mechanism shown; other side omitted for clarity. Mechanisms supplied as a pair. Mount plates fasten to the top, inside face of the panels (2 positions) as DETAIL C shown. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 5 FUTUREAUTOMATION

Page 6

PIC SP 2 PICTURE SPLIT MECHANISM PANEL TRAVEL DETAILS The maximum travel distance is 700 [27.6] per panel. This accommodates for the MAX recess width for the PIC SP 2(1400[55.2])

27 9/16" 700 MAX TECHNICAL SHEET 55 1/8" UK +44 (0) 1438 833577 US +1 (603) 742 9181 1400 MAX ISSUE 004 WWW NET . . SHEET 6 FUTUREAUTOMATION

Page 7

PIC SP 2 PICTURE SPLIT MECHANISM 56 1/8" MOUNTING DETAILS 1425 These are suggested dimensions for positioning the mechanisms on the wall. The dimensions are based 31 1/2" 31 1/2" around the panel sizes stated on Page 4. 800 800 28 9/16" 725 Mechanisms mount onto the wall 1" surface and fastened into 25 position. 6mm[0.2] slots are provided to aid installation. 5 5/16" 135 14 15/16" 380 12 3/16" 310 1 3/16" 6 5/16" 30 160 25 9/16" 650 0" 0 1 3/16" 30 1 9/16" Cable entry/exit hole 40 nominal hole recommended TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 7 FUTUREAUTOMATION

Page 8

PIC SP 2 PICTURE SPLIT MECHANISM CONTROL BOX DETAILS • Power Supply Unit (PSU) will allow 110V or 240V AC input. The same PSU is used for EU or US mains supplies. • Other than control cables, all cables terminate at the control board via standard phoenix connnectors. • Cable loom length supplied at approx. 4m [158"]. Loom can be extended to a maximum of approx. 10m [400"]. • Minimum cable bend radius 25mm [1"]. 2 1/16" 52 RS232 PORT CONTACT CLOSURE PORT EMERGENCY STOP CONNECTOR IR LEAD INPUT 3.5mm [1/8"] JACK 12 1/8" 308 IR OUTPUT INDICATOR LED 3 Cables lead from bracket to control box 1/4" 5/16" 7 8.2 11/16" 17 AC Mains IN 5 7/8" 3/16" 150 5.2 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 8 FUTUREAUTOMATION