Future Automation PICSPLIT1 technical sheet

Page 1

EDIT CUSTOM PROPERTIES 29. TITLE TO DESIRED PIC SP 1 PRODUCT CODE PICTURE SPLIT MECHANISM 30. SUBHEADING TO DESIRED PRODUCT DESCRIPTION EDIT CUSTOM PROPERTIES TECHNICAL SHEET 31. ISSUE NO. UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 TO DESIRED ISSUE NUMBER WWW NET . . SHEET 1 FUTUREAUTOMATION

Page 2

PIC SP 1 PICTURE SPLIT MECHANISM SPECIFICATION MEASUREMENTS Maximum Screen Size 42" (1067mm) Maximum Weight Capacity 15Kg (33lb) per Panel Maximum Speed 120mm/s Maximum Travel 1150mm (45.3") Depth From Wall 50mm (2.0") Product Weight 15Kg (33lb) per Mechanism Packaging Dimensions TBC Shipping Weight TBC Movement Type Motorised Power Supply Required 110V - 240V AC Power Consumption Max. 110W Power Consumption Standby 3W Control Options IR Remote, RS232, Contact Closure Product Options / Features Custom RAL paint finishes Package Contents Mechanism, IR remote control Marine Suitable No TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 2 FUTUREAUTOMATION

Page 3

PIC SP 1 PICTURE SPLIT MECHANISM RECESS DETAILS Fully lined recess for the screen. The front of the screen can be flush with the wall surface or set slightly back. CABLES: During installation, cables between the two mechanisms shall be required to run to a suitable storage location; connecting to the control box (308[12.2] x 150[5.9] x 52[2.1]). O A nominal 40mm[1.6] cable entry/exit hole is 3/8" recommended to provide suitable access for cable 10 routing. The control box shall need to be connected into a mains (13A) plug socket. An infrared receiver on a 1.5m[59.1] lead is also plugged into the control box. PANELS: The moving panels shall be 10mm[0.4] proud of the wall surface. NOTE: 1150mm[45.3] is the widest recess this version of the mechanism can cover. This dimension can be reduced for small recesses but not increased. 45 1/4"

1150

47 1/4"

1200

TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 3 FUTUREAUTOMATION O SECTION O-O

Page 4

PIC SP 1 PICTURE SPLIT MECHANISM 1 3/4" 45 PANEL DETAILS These are suggested dimensions for the panels. The panels must have an internal depth of 45mm to conceal the mechanism; as shown in DETAIL B.

1" 25

30 1/2" DETAIL B

775

28 9/16" 45 1/4" 725

1150

A B 28 9/16" 30 1/2" 725 775 45 1/4"

1150

106 5/16"

2700

SECTION A-A A TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 4 FUTUREAUTOMATION

Page 5

PIC SP 1 PICTURE SPLIT MECHANISM PANEL MOUNTING DETAILS D C DETAIL D Panel mount plates hook onto two bolts. The height of the bolts can be adjusted to ensure the panels are level. One side of Picture Split mechanism shown; other side omitted for clarity. Mechanisms supplied as a pair. Mount plates fasten to the DETAIL C top, inside face of the panels (2 positions) as shown. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 5 FUTUREAUTOMATION

Page 6

PIC SP 1 PICTURE SPLIT MECHANISM PANEL TRAVEL DETAILS The maximum travel distance is 575 [22.7] per panel. This accommodates for the MAX recess width for the PIC SP 1(1150[45.3])

22 5/8" 575 MAX 45 1/4" 1150 MAX TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 6 FUTUREAUTOMATION

Page 7

PIC SP 1 PICTURE SPLIT MECHANISM 47 1/4" 1200 MOUNTING DETAILS 26 9/16" 26 9/16" 675 675 These are suggested dimensions for positioning the mechanisms on the wall. The dimensions are based 23 5/8" around the panel sizes stated on Page 4. 600 1" Mechanisms mount onto the wall 25 5 5/16" surface and fastened into 135 position. 6mm[0.2] slots are provided to aid installation. 12" 305 9 1/4" 235 3 3/8" 85 0" 25 9/16" 650 0

50 50 1 15/16" 1 15/16"

1 9/16" Cable entry/exit hole 40 nominal hole recommended TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 7 FUTUREAUTOMATION

Page 8

PIC SP 1 PICTURE SPLIT MECHANISM CONTROL BOX DETAILS • Power Supply Unit (PSU) will allow 110V or 240V AC input. The same PSU is used for EU or US mains supplies. • Other than control cables, all cables terminate at the control board via standard phoenix connnectors. • Cable loom length supplied at approx. 4m [158"]. Loom can be extended to a maximum of approx. 10m [400"]. • Minimum cable bend radius 25mm [1"]. 2 1/16" 52 RS232 PORT CONTACT CLOSURE PORT EMERGENCY STOP CONNECTOR IR LEAD INPUT 3.5mm [1/8"] JACK 12 1/8" 308 IR OUTPUT INDICATOR LED 1/8" 3 Cables lead from bracket to control box 3.5 1/4" 5/16" 7 8.2 11/16" 17 AC Mains IN 5 7/8" 150 3/16" 5.2 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 8 FUTUREAUTOMATION