Future Automation PIC2 technical sheet

Page 1

EDIT CUSTOM PROPERTIES 29. TITLE TO DESIRED PIC-2 PRODUCT CODE PICTURE LIFT MECHANISM 30. SUBHEADING TO DESIRED PRODUCT DESCRIPTION EDIT CUSTOM PROPERTIES TECHNICAL SHEET 31. ISSUE NO. UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 007 TO DESIRED ISSUE NUMBER WWW NET . . SHEET 1 FUTUREAUTOMATION

Page 2

PIC-2 PICTURE LIFT MECHANISM SPECIFICATION MEASUREMENTS Product Dimensions (H x W x D) 868mm (34 3/16") x 797mm (31 3/8") x 102mm (4") Maximum Weight Capacity 10Kg (22lb) Maximum Travel 710mm (27 15/16") Product Weight 7Kg (15lb) Packaging Dimensions 930mm (36 5/8") x 300mm (11 13/16") x 210mm (8 1/4") Shipping Weight 11Kg (24lb) 27 15/16" Movement Type Motorised 710 Power Supply Required 110V - 240V AC Power Consumption Max. 110W Power Consumption Standby 3W Control Options IR Remote, RS232, Contact Closure Product Options / Features Specific B&O and Loewe mounts / adapters, Custom RAL paint finishes, Marine suitable version Package Contents Mechanism, IR remote control Marine Suitable No TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 007 WWW NET . . SHEET 2 FUTUREAUTOMATION

Page 3

PIC-2 PICTURE LIFT MECHANISM GENERAL DIMENSIONS 31 3/8" 797 MECHANISM WIDTH 29 13/16" 758 34 3/16" 868 3 1/8" 80 4 9/16" 116 2 11/16" 68 4" 102 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 007 WWW NET . . SHEET 3 FUTUREAUTOMATION

Page 4

PIC-2 PICTURE LIFT MECHANISM MECHANISM DETAILS 33 7/16" 850 MIN. INTERNAL PANEL WIDTH P UP POSITION DOWN POSITION A 7 1/2" REPRESENTATIVE 190 PANEL 27 15/16" 710 34 1/4" 870 MAX. MIN. TRAVEL INTERNAL PANEL HEIGHT MAX. RECESS HEIGHT = RECESS INTERNAL PANEL HEIGHT - 190 [7 1/2"] MAX. RECESS WIDTH = INTERNAL PANEL WIDTH A TECHNICAL SHEET P UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 007 WWW NET . . SHEET 4 FUTUREAUTOMATION

Page 5

PIC-2 PICTURE LIFT MECHANISM MOUNTING DETAILS B 3 1/8" 80 CUT OUT DEPTH 3/8" 10 MIN. WALL CLEARANCE Cassette 3 1/4" C 82 MECHANISM CUT OUT HEIGHT 13/16" 20 2 3/4" 70 Cables exit on the right. Control box 1" must be mounted in DETAIL C 25 Cables exit through an easily accessible MIN. the rear as standard. location outside of PANEL DEPTH Cables can also be the recess. routed through the top or bottom faces of the cassette. B SECTION B-B TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 007 WWW NET . . SHEET 5 FUTUREAUTOMATION

Page 6

PIC-2 PICTURE LIFT MECHANISM CONTROL BOX 5 7/8" 150 CONTACT CLOSURE PORT 11/16" 17 RS232 PORT EMERGENCY STOP CONNECTOR 5 7/16" IR OUTPUT INDICATOR LED 138 IR LEAD INPUT 3.5mm [0.14"] JACK 1/4" 7

52 2 1/16"

3/16" 5/16" 5.2 8.2 NOTES MAINS INPUT (110V OR 240V AC, 3A) • POWER SUPPLY UNIT (PSU) WILL ALLOW 110V OR 240V AC INPUT. THE SAME PSU IS USED FOR EU OR US MAINS SUPPLIES. • OTHER THAN CONTROL CABLES, ALL CABLES TERMINATE AT CONTROL BOARD VIA STANDARD PHOENIX CONNECTORS. • CABLE LOOM LENGTH SUPPLIED AT APPROX. 2m [78 3/4"]. LOOM CAN BE EXTENDED UP TO MAXIMUM OF APPROX. 10m [400"]. • MINIMUM CABLE BEND RADIUS 25mm [1"]. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 007 WWW NET . . SHEET 6 FUTUREAUTOMATION