Future Automation PIC1 technical sheet

Page 1

EDIT CUSTOM PROPERTIES 29. TITLE TO DESIRED PIC-1 PRODUCT CODE PICTURE LIFT MECHANISM 30. SUBHEADING TO DESIRED PRODUCT DESCRIPTION EDIT CUSTOM PROPERTIES TECHNICAL SHEET 31. ISSUE NO. UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 007 TO DESIRED ISSUE NUMBER WWW NET . . SHEET 1 FUTUREAUTOMATION

Page 2

PIC-1 PICTURE LIFT MECHANISM SPECIFICATION MEASUREMENTS Product Dimensions (H x W x D) 718mm (28 1/4") x 797mm (31 3/8") x 102mm (4") Maximum Weight Capacity 10Kg (22lb) Maximum Travel 560mm (22 1/6") Product Weight 7Kg (15lb) Packaging Dimensions 930mm (36 5/8") x 300mm (11 13/16") x 210mm (8 1/4") Shipping Weight 10Kg (22lb) Movement Type Motorised Power Supply Required 110V - 240V AC Power Consumption Max. 110W Power Consumption Standby 3W 22 1/16" Control Options IR Remote, RS232, Contact Closure 560 Product Options / Features Specific B&O and Loewe mounts / adapters, Custom RAL paint finishes, Marine suitable version Package Contents Mechanism, IR remote control Marine Suitable No TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 007 WWW NET . . SHEET 2 FUTUREAUTOMATION

Page 3

PIC-1 PICTURE LIFT MECHANISM GENERAL DIMENSIONS 31 3/8" 797 MECHANISM WIDTH 29 13/16" 758 28 1/4" 718 3 1/8" 80 4 9/16" 116 2 11/16" 68 4" TECHNICAL SHEET 102 UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 007 WWW NET . . SHEET 3 FUTUREAUTOMATION

Page 4

PIC-1 PICTURE LIFT MECHANISM MECHANISM DETAILS P 33 7/16" 850 MIN. INTERNAL PANEL WIDTH UP POSITION DOWN POSITION A REPRESENTATIVE PANEL 22 1/16" 560 28 3/8" MAX. 720 TRAVEL MIN. INTERNAL PANEL HEIGHT MAX. RECESS HEIGHT = INTERNAL PANEL HEIGHT - 190 [7 1/2"] RECESS MAX. RECESS WIDTH = INTERNAL PANEL WIDTH A TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 007 WWW NET . . SHEET 4 FUTUREAUTOMATION P

Page 5

PIC-1 PICTURE LIFT MECHANISM MOUNTING DETAILS B 3 1/8" 80 CUT OUT DEPTH 3/8" 10 MIN. WALL CLEARANCE Cassette 3 1/4" 82 MECHANISM C CUT OUT HEIGHT 13/16" 20 2 3/4" 70 Cables exit on the 1" DETAIL C 25 right. Control box Cables exit through MIN. must be mounted in PANEL DEPTH the rear as standard. an easily accessible Cables can also be location outside of routed through the the recess. top or bottom faces of the cassette. B SECTION B-B TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 007 WWW NET . . SHEET 5 FUTUREAUTOMATION

Page 6

PIC-1 PICTURE LIFT MECHANISM CONTROL BOX 5 7/8" 150 CONTACT CLOSURE PORT 11/16" 17 RS232 PORT EMERGENCY STOP CONNECTOR 5 7/16" IR OUTPUT INDICATOR LED 138 IR LEAD INPUT 3.5mm [0.14"] JACK 1/4" 7

52 2 1/16"

5/16" 3/16" 8.2 5.2 MAINS INPUT (110V OR 240V AC, 3A) NOTES • POWER SUPPLY UNIT (PSU) WILL ALLOW 110V OR 240V AC INPUT. THE SAME PSU IS USED FOR EU OR US MAINS SUPPLIES. • OTHER THAN CONTROL CABLES, ALL CABLES TERMINATE AT CONTROL BOARD VIA STANDARD PHOENIX CONNECTORS. • CABLE LOOM LENGTH SUPPLIED AT APPROX. 2m [78 3/4"]. LOOM CAN BE EXTENDED UP TO MAXIMUM OF APPROX. 10m [400"]. • MINIMUM CABLE BEND RADIUS 25mm [1"]. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 007 WWW NET . . SHEET 6 FUTUREAUTOMATION