Future Automation PDR2-COM technical sheet

Page 1

EDIT CUSTOM PROPERTIES 29. TITLE TO DESIRED PDR2-COM PRODUCT CODE PROJECTOR DROP RANGE COMMERCIAL 30. SUBHEADING TO DESIRED PRODUCT DESCRIPTION EDIT CUSTOM PROPERTIES TECHNICAL SHEET 31. ISSUE NO. UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 TO DESIRED ISSUE NUMBER WWW NET . . SHEET 1 FUTUREAUTOMATION

Page 2

PDR2-COM PROJECTOR DROP RANGE COMMERCIAL 9 7/8" 251 SPECIFICATION MEASUREMENTS Product Dimensions 782mm (30 13/16") W x 782mm (30 13/16") L x 251mm (9 7/8") H Recommended Maximum Projector 420mm (16 9/16") W x 476mm (18/ 3/4") L x 214mm (8 7/16") H Dimensions Maximum Projector Weight Capacity 15Kg (33lb) Supplied Aluminium Infill Panel Weight 4Kg (9lb) Maximum Speed 25mm/s 400mm (15 3/4") - Standard Maximum Travel From Finished Ceiling 700mm (27 1/2") - Available 940mm (37") - Available Height from Finished Ceiling 248mm (9 3/4") Product Weight 42Kg (93lb) Packaging Dimensions TBC Shipping Weight TBC Movement Type Motorised Power Supply Required 110V - 240V AC Power Consumption Max. 120W Power Consumption Standby 3W Compatible Projectors Sony VPL-XW5000ES/XW6000ES/XW7000ES Control Options IR Remote, RS232, Contact Closure Product Options / Features Specific mounts / adapters, Custom RAL paint finishes Package Contents Mechanism, IR remote control TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 2 FUTUREAUTOMATION

Page 3

PDR2-COM PROJECTOR DROP RANGE COMMERCIAL VIEWS BELOW SHOW ACTION FROM IN POSITION TO DOWN POSITION DESIGN HIGHLIGHTS Quick and simple mechanism installation within a suspended ceiling. Available with three different drop options. • Standard drop 400mm (15 3/4") • Long drop 700mm (27 1/2") • Extra Long drop 940mm (37") Projector carriage can be tilted significantly once dropped. Full cable management keeps all power and signal cables as neat and tidy as possible. Top cover panel finishes internal void in matching white satin finish. Slotted mounting system provides easily adjustable installation for almost any projector. Standard control box can also control a third party product such as a projector screen. Comes with a an on-ceiling 3mm [1/8"] flange which, as standard, is a painted RAL9910. The bottom panel fills the aperture leaving a continuous 3mm [1/8"] shadow gap around the panel. For quick and simple install, 3mm on ceiling flange with infill mechanism easily clicks into panel with one continuous 3mm framework. [1/8"] shadow gap around panel. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 3 FUTUREAUTOMATION

Page 4

PDR2-COM PROJECTOR DROP RANGE COMMERCIAL RECESS MOUNTING Suspended Ceiling 29 1/2" 750 Suspended Ceiling Opening 29 1/2" 750 Suspended Ceiling Opening 3/8" 10 Studding (Not Supplied) MDF Ceiling Cassette (Supplied) Underside View Hanger Bracket Suspended Ceiling Infill Panel (RAL 9910, Supplied) MDF Ceiling cassette with Sheet Metal Flange 3 [1/8"] Sheet Metal Flange TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 4 FUTUREAUTOMATION O O

Page 5

EDIT CUSTOM PROPERTIES 29. TITLE TO DESIRED PDR2-COM PRODUCT CODE PROJECTOR DROP RANGE COMMERCIAL 30. SUBHEADING TO DESIRED PRODUCT DESCRIPTION INSTALLATION PROCEDURE 2. Prepare Cabling A Rear 1. Install MDF Cassette Front Front Rear Supplied Install Aid DETAIL A 3. Install Mechanism EDIT CUSTOM PROPERTIES TECHNICAL SHEET 31. ISSUE NO. UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 TO DESIRED ISSUE NUMBER WWW NET . . SHEET 5 FUTUREAUTOMATION P P R R S S

Page 6

EDIT CUSTOM PROPERTIES 29. TITLE TO DESIRED PDR2-COM PRODUCT CODE PROJECTOR DROP RANGE COMMERCIAL 30. SUBHEADING TO DESIRED PRODUCT DESCRIPTION PROJECTOR TILT By undoing and repositioning the highlighted bolt on each side of the projector carriage, a significant tilt angle can be achieved. This is useful when using the projector drop in rooms with high ceilings where the projector is a lot higher than the screen being viewed. Using the tilt adjustment means the projector image must be altered using the keystone function on the projector. EDIT CUSTOM PROPERTIES TECHNICAL SHEET 31. ISSUE NO. UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 TO DESIRED ISSUE NUMBER WWW NET . . SHEET 6 FUTUREAUTOMATION

Page 7

EDIT CUSTOM PROPERTIES 29. TITLE TO DESIRED PDR2-COM PRODUCT CODE PROJECTOR DROP RANGE COMMERCIAL 30. SUBHEADING TO DESIRED PRODUCT DESCRIPTION 20 7/8" PROJECTOR SUITABILITY 530 17 5/8" 448 17 11/16" 15/16" 450 24 8 7/16" 214 7 3/4" 16 9/16" 17 11/16" 6 13/16" Recommended 197 420 450 173 Maximum Projector Height 16 9/16" IF THEN 420 Recommended Maximum Projector Width Max. Height = 197mm [7 3/4"] 450mm [17 11/16"] > Width > 420mm [16 9/16"] Max. Length = 476mm [18 3/4"] 19 1/8" 18 3/4" 485 476 Max. Height = 214mm [8 7/16"] Width 420mm [16 9/16"] Recommended Maximum Max. Length = 530mm [20 7/8"] Projector Length Max. Height = 173mm [6 13/16"] Max. Length = 448mm [17 5/8"] Width > 450mm [17 11/16"] Must be mounted with 20mm spacers Maximum Available Space Recommended Maximum Projector Size Must be 40mm from front of carriage Recommended Maximum Projector Size accounts for only the Projectors External Dimensions. Should you want to use the maximum available space, thought must be taken with regard to where AV connections are located on the projector. EDIT CUSTOM PROPERTIES TECHNICAL SHEET 31. ISSUE NO. UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 TO DESIRED ISSUE NUMBER WWW NET . . SHEET 7 FUTUREAUTOMATION V W W V

Page 8

EDIT CUSTOM PROPERTIES 29. TITLE TO DESIRED PDR2-COM PRODUCT CODE PROJECTOR DROP RANGE COMMERCIAL 30. SUBHEADING TO DESIRED PRODUCT DESCRIPTION GENERAL DIMENSIONS 29 3/16" 2 3/4" 28 7/8" 742 70 734 B 5 5/16" 135 3/16" 9 3/4" 4 248 6 7/8" 174 1/8" 3 30 13/16" Flange Thickness 27 9/16" 782 700 Flange Width Mounting Separation 1/8" 3 DETAIL B 26 5/8" 676 10.5 7/16" THRU Infill panel Width 30 13/16" 26 5/8" 21 5/8" 782 676 550 Flange Infill panel Mounting Length Length Separation A DETAIL A EDIT CUSTOM PROPERTIES TECHNICAL SHEET 31. ISSUE NO. UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 TO DESIRED ISSUE NUMBER WWW NET . . SHEET 8 FUTUREAUTOMATION

Page 9

EDIT CUSTOM PROPERTIES 29. TITLE TO DESIRED PDR2-COM PRODUCT CODE PROJECTOR DROP RANGE COMMERCIAL 30. SUBHEADING TO DESIRED PRODUCT DESCRIPTION CONTROL BOX DETAILS 5 7/16" 138 RS232 Port IR Output Indicator LED Contact Closure Port Emergency Stop Connector IR Lead Input (Removal will stall mechanism) 196 7/8" 3.5mm [0.14"] JACK 5000 13/16" max. Cable Loom 20 max. Approx. Length 3 CORE CABLE LIFT MOTOR 1/4" 10mm [0.4"] dia.

5/16" EU SPEC: 0.75mm² 8 US SPEC: 18AWG 2 1/16" 2 CORE CABLE 52 SWITCH 6mm [0.25"] dia. EU SPEC: 0.5mm² 3/16" 5 7/8" US SPEC: 20AWG 5

150

NOTES • POWER SUPPLY UNIT (PSU) WILL ALLOW 110V OR 240V AC INPUT. THE SAME PSU IS USED FOR EU OR US MAINS SUPPLIES. • OTHER THAN CONTROL CABLES, ALL CABLES TERMINATE AT CONTROL BOARD VIA STANDARD PHOENIX CONNECTORS. • CABLE LOOM LENGTH SUPPLIED AT APPROX. 5m [196 7/8"]. LOOM CAN BE EXTENDED UP TO MAXIMUM OF APPROX. 10m [400"]. • MINIMUM CABLE BEND RADIUS 25mm [1"]. EDIT CUSTOM PROPERTIES TECHNICAL SHEET 31. ISSUE NO. UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 TO DESIRED ISSUE NUMBER WWW NET . . SHEET 9 FUTUREAUTOMATION