Future Automation MDM-H-T915 technical sheet

Page 1

MDM-H-T915 MOVING DOOR MECHANISM WITH CLUTCH TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 1 FUTUREAUTOMATION

Page 2

MDM-H-T915 MOVING DOOR MECHANISM WITH CLUTCH GENERAL DIMENSIONS 2 1/2" 63 3/8" MDM is fixed from underneath 10 1 3/16" through the mounting holes shown 30 Maximum length of fixing head 3 13/16" 96 0" 0 DETAIL B SECTION C-C 3 15/16" 82 11/16" 100 2100 C B 7 7/16" 189 9 15/16" 253 3 13/16" C 97

1 5/8" 0 0" 41

775 550 400 400 550 700 250 100 100 250 700 725 30 1/2" 21 5/8" 15 3/4" 15 3/4" 21 5/8" A 27 9/16" 9 13/16" 3 15/16" 3 15/16" 9 13/16" 27 9/16" 28 9/16"

9 15/16" 252 13 3/4" 350 Hanger Separation 1 3/4" 45 SECTION A-A 36" 914 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 A ISSUE 001 WWW NET . . SHEET 2 FUTUREAUTOMATION

Page 3

MDM-H-T915 MOVING DOOR MECHANISM WITH CLUTCH PANEL DIMENSIONS Recommended minimum OPEN POSITION space at end of mechanism to Areas requires access from allow access to belt tensioner below for switch adjustment Area requires access for the motor 9 13/16" 250 D 8 1/4" 210 Hanger Adjustment Loosen the nuts and raise or lower to desired position DETAIL D 36" 915 Travel CLOSED POSITION 9 15/16" 252 2 3/8" 61 44 5/16" 1125 36" 914 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 3 FUTUREAUTOMATION

Page 4

MDM-H-T915 MOVING DOOR MECHANISM WITH CLUTCH SWITCH ADJUSTMENT The limit switches can be adjusted using a allen key. Undo the bolts and slide switch to desired position. DETAIL D D TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 4 FUTUREAUTOMATION

Page 5

MDM-H-T915 MOVING DOOR MECHANISM WITH CLUTCH

308 12 1/8"

CABLE LOOM LENGTH APPROX RS232 PORT IR OUTPUT 118 1/8" 3000 INDICATOR LED CONTACT CLOSURE PORT IR LEAD INPUT

3.5mm [0.14"] JACK EMERGENCY STOP CONNECTOR 20 max 0.79 max

5/16"

52 8 CORE CABLE 2 1/16"

MOTOR 5 10mm [0.4"] dia. 3/16" 5 7/8" 3 CORE CABLE MAINS INPUT

EU SPEC: 0.5mm² 150 SWITCH LIMITS US SPEC: 20AWG 6mm [0.25"] dia. EU SPEC: 0.5mm² NOTES US SPEC: 20AWG • POWER SUPPLY UNIT (PSU) WILL ALLOW 110V OR 240V AC INPUT. THE SAME PSU IS USED FOR EU OR US MAINS SUPPLIES. • OTHER THAN CONTROL CABLES, ALL CABLES TERMINATE AT CONTROL BOARD VIA STANDARD PHOENIX CONNECTORS. • CABLE LOOM LENGTH SUPPLIED AT APPROX. 3m [118"]. LOOM CAN BE EXTENDED UP TO MAXIMUM OF APPROX. 10m [400"]. • MINIMUM CABLE BEND RADIUS 25mm [1"]. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 5 FUTUREAUTOMATION