Future Automation MDM 2130 mm travel example technical sheet

Page 1

MDM-T2130 MOVING DOOR MECHANISM Open Position Closed Position Representative Panel TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 1 FUTUREAUTOMATION

Page 2

MDM-T2130 MOVING DOOR MECHANISM PANEL CLOSED 129 15/16" 3300 Area requires access 7 7/8" 200 for the motor 15 3/4" 400 Areas requires access from below for switch adjustment Recommended minimum space at end of mechanism to allow access to belt tensioner 78 3/4" 2000 83 7/8" 2130 PANEL OPEN 16 15/16" 430 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 2 FUTUREAUTOMATION

Page 3

MDM-T2130 MOVING DOOR MECHANISM Cable loom to control Boards GENERAL DIMENSIONS DETAIL C DETAIL B MDM is fixed from 3/8" underneath through Hanger Adjustment 10 3 3/4" mounting holes in the Loosen the nuts and raise or Maximum 95 column lower to desired position Length of Motors located at the end of the mechanism. Fixing Head Recommended to allow access from below for servicing. 7 1/8" 181 3 15/16" 100 7 1/2" ±3/16" 190 ±5 3/16" 129 15/16" 4.4 3300 C A SECTION A-A A B 1 15/16" 50 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 3 FUTUREAUTOMATION

Page 4

MDM-T2130 MOVING DOOR MECHANISM SWITCH ADJUSTMENT The limit switches can be adjusted using an allen key. Undo the bolts and slide switch to desired position. DETAIL D D TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 4 FUTUREAUTOMATION

Page 5

MDM-T2130 MOVING DOOR MECHANISM

307.5 12 1/8"

RS232 PORT IR OUTPUT INDICATOR LED CONTACT CABLE LOOM CLOSURE LENGTH APPROX PORT 118 1/8" IR LEAD INPUT 3000

3.5mm [0.14"] JACK EMERGENCY STOP CONNECTOR 20 max 0.79 max

5/16"

52.1 8 CORE CABLE 2 1/16"

MOTOR 5.2 10mm [0.4"] dia. 3/16" 5 7/8" 3 CORE CABLE MAINS INPUT

EU SPEC: 0.5mm² 149.5 SWITCH LIMITS US SPEC: 20AWG 6mm [0.25"] dia. EU SPEC: 0.5mm² NOTES US SPEC: 20AWG • POWER SUPPLY UNIT (PSU) WILL ALLOW 110V OR 240V AC INPUT. THE SAME PSU IS USED FOR EU OR US MAINS SUPPLIES. • OTHER THAN CONTROL CABLES, ALL CABLES TERMINATE AT CONTROL BOARD VIA STANDARD PHOENIX CONNECTORS. • CABLE LOOM LENGTH SUPPLIED AT APPROX. 3m [118"]. LOOM CAN BE EXTENDED UP TO MAXIMUM OF APPROX. 10m [400"]. • MINIMUM CABLE BEND RADIUS 25mm [1"]. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 5 FUTUREAUTOMATION