Rako – WMS-600 – Wired – Enclosure Control Card – Switched
The WMS-600 is a plug-in switching card for the RAK8-MB motherboard, used in Rako wired and wireless systems. It switches non-dimmable lighting, extractor fans and other mains loads on and off.
£106.00 + VAT
Lead time circa 2–4 days
Special order, non-returnable
- Refurbished In-House
Components repaired or replaced where needed, then cleaned and bench tested.New, Box Opened
Unused surplus stock with opened packaging. This unit is sold untested. - Specification Help
Need help with specification or compatibility? Speak to our team.
Specification
Additional information
| Manufacturer | Rako |
|---|---|
| Range | Rako Wired |
| Model | WMS-600 |
| Type | Enclosure Control Card – Switched |
| Condition | New |
| Configuration / programming method | Initial setup & programming – Via Windows / MacOS programming software (Engineer required) / Tweaks to lighting scenes and levels – Via Windows / MacOS programming software (Engineer required). Or via iOS / Android app (By end user) |
| Number of controllable circuits | 1 |
| Controllable circuit types | Switched |
| Warranty | 2 years hardware warranty provided by Rosette Electrical |
| Control type | Mains Switched |
| Minimum load | 1W |
| Maximum load | 600W |
| Dimensions | 115x25x24mm |
| Weight | 55g |
| Connections | Pluggable module |
| Operating temperature | +2C to +40C |
| Humidity | +5% to 95% non-condensing |
| Communication | RS485 to other RAKs, RX-Link and RAK-Link |
| Standards | Emissions – EN61000-6-3 : 2001; Immunity – EN61000-6-1 : 2001 |
Specification Sheets & Documents
- Rako - WMS-600 - Technical SpecificationsView PDF: Rako - WMS-600 - Technical Specifications
Not sure it’s the right part?
Speak to our in-house specialists about your system, we’ll help identify the part you need.
