This document could not be shown here. Open the PDF.
Text of this document2 pages · 246 words
Page 1
data sheet WWMMSS--660000 600W SWITCHING MODULE FOR USE WITH RAK8-MB WWHHAATT IISS IITT ?? The WMS-600 pluggable module is for use with non WMS-600 is a pluggable The dimmable loads or other outputs that require mains switching module to be used switching. with the RAK8-MB. The unit is plugged directly into one of the slots on the RAK8- MB. The WMS-600 is for use with non dimmable lighting loads, extractor fans or any other switched mains output applications. The WMS-600 combines with the RAK8-MB to provide a centralised lighting control system that can integrate with either wireless or wired Rako products. As with all RAK8 pluggable modules no memory is stored on the WMS- 600. All programming is stored on the motherboard meaning the WMS- 600 can be swapped with any other module without the need to be re- programmed. For other fitting types please refer to the datasheet for: WMT-400 WML-300 WDA-600 www.rakocontrols.com
Page 2
data sheet WWMMSS--660000 600W SWITCHING MODULE FOR USE WITH RAK8-MB technical data mechanical data dimensions 115x25x24mm maximum loading 600W minimum loading 1W Weight 55g mm 115 climate range Temperature +2C to +40C Humidity +5% to 95% non condensing standards Emissions - EN61000-6-3 : 2001 Immunity - EN61000-6-1 : 2001 communication RS485 to other RAKs, RX-Link and RAK-Link 25mm connections Pluggable module connection details telephone +44 (0) 1634 226666 fax +44 (0) 1634 226667 www.rakocontrols.com WE RESERVE THE RIGHT TO CHANGE THE SPECIFICATION AND DATA HEREWITH WITHOUT NOTICE. © 2017 RAKO CONTROLS LIMITED
Need assistance or looking to source this item?