Future Automation TSLH LG86UH5FH example technical sheet

Page 1

EDIT CUSTOM PROPERTIES 29. TITLE TO DESIRED TSL-H - S1 - LG 86UH5F-H PRODUCT CODE TELESCOPIC SCREEN LIFT HEAVY - SIZE 1 30. SUBHEADING TO DESIRED PRODUCT DESCRIPTION DOWN UP Mechanism as supplied. EDIT CUSTOM PROPERTIES TECHNICAL SHEET 31. ISSUE NO. UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 TO DESIRED ISSUE NUMBER WWW NET . . SHEET 1 FUTUREAUTOMATION

Page 2

TSL-H - S1 - LG 86UH5F-H TELESCOPIC SCREEN LIFT HEAVY - SIZE 1 SPECIFICATION MEASUREMENTS Product Dimensions (WxHxD) 1570mm (61 13/16") x 1100mm (43 5/16") x 201mm (7 16/15") Minimum Screen Height 1065 (41 15/16") Maximum Screen Height 1130mm (44 1/2") Maximum Weight Capacity 100Kg (220.5lb) - Screen + Enclosure Product Weight 100Kg (220.5lb) Movement Type Motorised Power Supply Required 110V - 240V AC Power Consumption Max. 120W Power Consumption Standby 3W Mounting Patterns Supported VESA 400, 600 W x 400, 600 H Control Options IR Remote, RS232, Contact Closure Product Options / Features Specific B&O and Loewe mounts / adapters, Custom RAL paint finishes, Marine Outdoor suitable version Package Contents Mechanism, IR remote control Marine Suitable Yes TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 2 FUTUREAUTOMATION

Page 3

TSL-H - S1 - LG 86UH5F-H TELESCOPIC SCREEN LIFT HEAVY - SIZE 1 GENERAL INFORMATION Key hole details allow the enclosure to be hooked into place. DETAIL A SCALE 1 : 8 LID and ENCLOSURE - To be made by others. Total allowable weight for all timber work and lid is 40Kg. Brackets for enclosure allow adjustment. The lid must be easily removed if the mechanism was stuck in the down position. The fixings for the screen are at the top here so it can then be lifted off. The drive to the motor can also be disconnected here allowing the screen and mechanism to be manually lifted. Screen cables enter here Lifting eyes can added here to assist in manual Lifting/recovery. Screen cables A enter here Access here to disconnect motor. Front access is required to install the lift. Allow 25mm in front of the screen if the mechanism is to be partially sunk below floor level. TRIM PANEL - Not supplied. This trim panel is lifted up as the screen is lowered into the cabinet. Brackets are supplied to attach it. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 3 FUTUREAUTOMATION

Page 4

TSL-H - S1 - LG 86UH5F-H TELESCOPIC SCREEN LIFT HEAVY - SIZE 1

DOWN POSITION DETAILS

D All sizing calculations are based off a 20mm [13/16"]

275 57 screen enclosure panel thickness. Any increace in 261.1 70.5 0 10 13/16"10 1/4" 2 3/4"2 1/4"0" 12" 305

this thickness will increace the required space. 1 3/16" C 30 B B 2 3/8" 60.6 DETAIL D Screen 43 5/8" Depth 44 3/4" 43 3/16" 1108 1137 1097.2 Screen Internal Screen Enclosure Cabinet Height Height Height C 79 5/16" 2015 Internal Cabinet Width 77 13/16" 1976 Screen Enclosure Width 75 13/16" 1926.2 Screen Width SECTION C-C 12" 305 Internal 7 1/2" Cabinet 191 Depth Screen Enclosure Depth SECTION B-B TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 4 FUTUREAUTOMATION

Page 5

TSL-H - S1 - LG 86UH5F-H TELESCOPIC SCREEN LIFT HEAVY - SIZE 1 13/16" 90 3/4" 20 2305 UP POSITION DETAILS Enclosure 89 9/16" Thickness 2275 78 13/16" 1/4" 8 1/4" 2002 7 209 Opening Width Rebate in Lid Depth Enclosure 78 1/2" 8 9/16" Enclosure 1994 218 Lid Width Opening Depth F 1/8" 3.5 1/2" 12 Trim Panel Thickness E Trim Panel 45 15/16" 1167 44 3/4" DETAIL F 1137 Screen signal and power cables enter cable tracks here on both sides The lift cables exit the mechanism here and have a 3m flying lead to the control system. The control box is 320mm x 130mm x 230mm and requires a 220/240VAC supply. All control connections are made here. The trim panel is attached to a certain part of the mechanism so that it is lowered at a different rate to the screen. E 0" 0 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 SECTION E-E ISSUE 001 WWW NET . . SHEET 5 FUTUREAUTOMATION

Page 6

TSL-H - S1 - LG 86UH5F-H Suggested Taper Edge TELESCOPIC SCREEN LIFT HEAVY - SIZE 1 10° IMPORTANT ENCLOSURE DETAILS The Enclosure, Lid, Trim panel and Screen must weigh no DETAIL G more than 100Kg. ENCLOSURE LID 77 5/8" 1 3/16" 1971 30 Block to locate lid. G

Lid must lift off easily

473 0 8" 0" 18 5/8" 203

ENCLOSURE Block or detail to locate lid SECTION H-H Mount Plate 43 5/8" 1108 38 5/16" TRIM PANEL 973 12-13mm [0.47-0.51] 34 1/2" 876 28 7/16" 723 H H 16 9/16" 420 11 1/8" 282 32 1/2" 826 20 7/8" 6 11/16" 530 170 Trim 0" mounts 0 SEE CAD FOR FINER DETAIL

0 0" TECHNICAL SHEET

223 623 8 3/4" UK +44 (0) 1438 833577 US +1 (603) 742 9181 846 ISSUE 001 24 1/2"

33 5/16"

WWW NET . .

SHEET 6 FUTUREAUTOMATION

Page 7

TSL-H - S1 - LG 86UH5F-H TELESCOPIC SCREEN LIFT HEAVY - SIZE 1 Remove Screen Upright Fixings INSTALL INSTRUCTIONS Remove Screen Upright Fixings • Check that the cabinet, enclosure, lid and the trim panel are made to the details shown on the previous pages. Fix enclosure brackets to • You can stand the mechanism up on its base to test it the enclosure at the before putting in the cabinet. See control document for details. Use the IR remote with caution and always cover positions shown on the the STOP button in case of issues. See control previous page. document. • Centrally fix the mechanism to the back of the cabinet in the places shown. • Run up and down and then add the enclosure. • Adjust the position of the enclosure and adjust the up and down switches with caution. Temporarily add lid to Trim Panel - check height. fixing plates will be supplied. • Run screen cables up into enclosure. Secure cables as they enter and leave the cable tracks with cable ties. Make sure no cables can get tangled or caught as the mechanism moves. • Add trim panel. And adjust so it does not clash in the up or down positions. Watch as it initially moves and cover the STOP button. • The uprights can be removed from the mechanism and Adjuster for up added to the screen at the correct height. Rest screen on switch. floor to connect cables before hooking into place. • Check movement with screen with caution. Fixings at top and bottom - • Adjust switches with caution. Check in the control box to both sides. make sure the switches are acting correctly. CC2 LED for up position and CC1 LED for down. They go off when hit. Adjuster for down switch. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 7 FUTUREAUTOMATION