Future Automation TSLH SAM98QN90A example technical sheet

Page 1

EDIT CUSTOM PROPERTIES 29. TITLE TO DESIRED TSL-H - S2 - SAMSUNG 98QN90A PRODUCT CODE TELESCOPIC SCREEN LIFT HEAVY - SIZE 2 30. SUBHEADING TO DESIRED PRODUCT DESCRIPTION DOWN UP Mechanism as supplied. EDIT CUSTOM PROPERTIES TECHNICAL SHEET 31. ISSUE NO. UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 TO DESIRED ISSUE NUMBER WWW NET . . SHEET 1 FUTUREAUTOMATION

Page 2

TSL-H - S2 - SAMSUNG 98QN90A TELESCOPIC SCREEN LIFT HEAVY - SIZE 2 SPECIFICATION MEASUREMENTS Product Dimensions (WxHxD) 1570mm (61 13/16") x 1289mm (50 3/4") x 201mm (7 16/15") Maximum Weight Capacity 110Kg (242lbs) - Screen 70Kg (154lbs) + Enclosure 40Kg (88lbs) Product Weight 100Kg (220.5lb) Movement Type Motorised Power Supply Required 110V - 240V AC Power Consumption Max. 120W Power Consumption Standby 3W Mounting Patterns Supported VESA 400, 600 W x 400, 600 H Control Options IR Remote, RS232, Contact Closure Product Options / Features Specific B&O and Loewe mounts / adapters, Custom RAL paint finishes, Marine Outdoor suitable version Package Contents Mechanism, IR remote control Marine Suitable Yes TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 2 FUTUREAUTOMATION

Page 3

TSL-H - S2 - SAMSUNG 98QN90A TELESCOPIC SCREEN LIFT HEAVY - SIZE 2 Key hole details allow GENERAL INFORMATION the enclosure to be hooked into place. LID and ENCLOSURE - To be made DETAIL A by others. Total allowable weight SCALE 1 : 8 for all timber work and lid is 40Kg. Brackets for enclosure allow adjustment. The lid must be easily removed if the mechanism was stuck in the down position. The fixings for the screen are at the top here so it can then be lifted off. The drive to the motor can also be disconnected here allowing the screen and mechanism to be manually lifted. Screen cables enter here Lifting eyes can added here to assist in manual Lifting/recovery. Screen cables A enter here Access here to disconnect motor. Front access is required to install the lift. Allow 25mm in front of the screen if the mechanism is to be partially sunk below floor level. TRIM PANEL - Not supplied. This trim panel is lifted up as the screen is lowered into the cabinet. Brackets are supplied to attach it. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 3 FUTUREAUTOMATION

Page 4

TSL-H - S2 - SAMSUNG 98QN90A TELESCOPIC SCREEN LIFT HEAVY - SIZE 2

D DOWN POSITION DETAILS

All sizing calculations are based off a 20mm [13/16"]

275 57 245 231 70.5 0 screen enclosure panel thickness. Any increace in 10 13/16"9 5/8" 2 3/4"2 1/4"0" 9 1/8"

1 3/16" this thickness will increace the required space. C 30 B B 1 3/16" 31 DETAIL D Screen 49 5/8" Depth 50 3/4" 49 3/16" 1260 1289 1249 Screen Internal Screen Enclosure Cabinet Height Height Height C 89 1/2" 2274 Internal Cabinet Width 88" 2235 Screen Enclosure Width 86" 2185 Scren Width 10 13/16" SECTION C-C 275 6 5/16" Internal 161 Cabinet Screen Depth Enclosure Depth SECTION B-B TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 4 FUTUREAUTOMATION

Page 5

TSL-H - S2 - SAMSUNG 98QN90A TELESCOPIC SCREEN LIFT HEAVY - SIZE 2 13/16" 20 Enclosure UP POSITION DETAILS 102 11/16" Thickness 2609 1/4" 89" 101 9/16" 7 2261 2579 7 1/16" Rebate in Opening Width 179 Enclosure Lid Depth 88 11/16" 1/2" 7 3/8" 2253 12 188 Lid Width Trim Panel Opening Depth Thickness F Enclosure 1/8" 3.5 E Trim Panel 51 15/16" 1319 50 3/4" DETAIL F 1289 Screen signal and power cables enter cable tracks here on both sides The lift cables exit the mechanism here and have a 3m flying lead to the control system. The control box is 320mm x 130mm x 230mm and requires a 220/240VAC supply. All control The trim panel is attached to a certain connections are made here. part of the mechanism so that it is lowered at a different rate to the screen. 0" 0 E SECTION E-E TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 5 FUTUREAUTOMATION

Page 6

TSL-H - S2 - SAMSUNG 98QN90A TELESCOPIC SCREEN LIFT HEAVY - SIZE 2 Suggested Taper Edge IMPORTANT 10° ENCLOSURE DETAILS The Enclosure, Lid, Trim panel and Screen must weigh no DETAIL G more than 100Kg. ENCLOSURE LID 88 11/16" 1 3/16" 2253 30 Block to locate lid.

Lid must lift off easily

332.5 602.5 0 23 3/4" 13 1/16" 0" Block or detail to

ENCLOSURE locate lid SECTION H-H Mount Plate 49 5/8" 1260 44 5/16" 1125 34 7/16" 875 TRIM PANEL 12-13mm [0.47-0.51] 34 1/2" 876 H H 11 1/8" 16 5/8" 282 422 26 3/4" 6 3/4" 32 1/2" 680 172 826 Trim mounts 0" 0 SEE CAD FOR FINER DETAIL

TECHNICAL SHEET 223 623 8 3/4" UK +44 (0) 1438 833577 US +1 (603) 742 9181 846 ISSUE 001 24 1/2"

33 5/16"

WWW NET . . SHEET 6 FUTUREAUTOMATION

Page 7

TSL-H - S2 - SAMSUNG 98QN90A TELESCOPIC SCREEN LIFT HEAVY - SIZE 2 Remove Screen Upright Fixings INSTALL INSTRUCTIONS Remove Screen Upright Fixings • Check that the cabinet, enclosure, lid and the trim panel Fix enclosure brackets to are made to the details shown on the previous pages. the enclosure at the • You can stand the mechanism up on its base to test it positions shown on the before putting in the cabinet. See control document for previous page. details. Use the IR remote with caution and always cover the STOP button in case of issues. See control document. • Centrally fix the mechanism to the back of the cabinet in the places shown. • Run up and down and then add the enclosure. • Adjust the position of the enclosure and adjust the up Trim Panel - and down switches with caution. Temporarily add lid to fixing plates will check height. be supplied. • Run screen cables up into enclosure. Secure cables as they enter and leave the cable tracks with cable ties. Make sure no cables can get tangled or caught as the mechanism moves. • Add trim panel. And adjust so it does not clash in the up or down positions. Watch as it initially moves and cover the STOP button. • The uprights can be removed from the mechanism and Adjuster for up added to the screen at the correct height. Rest screen on switch. floor to connect cables before hooking into place. • Check movement with screen with caution. • Adjust switches with caution. Check in the control box to Fixings at top make sure the switches are acting correctly. CC2 LED for and bottom - up position and CC1 LED for down. They go off when hit. both sides. Adjuster for down switch. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 7 FUTUREAUTOMATION