Rako DIN-LINK Technical Specifications

Page 1

Datasheet DIN-LINK Power and Communication Unit Overview Specification The DIN-LINK is the communication device between the Mechanical DIN Bus and the Rako Wired Network (RWN). W157xH110xD59mm Dimensions The DIN-LINK has a 24V DC input used to power the DIN Width = 9 DIN Modules Bus and Rako Wired Network. Weight 270g Using Rasoft Pro, the DIN-LINK is used to map DIN module Mounting Top Hat DIN Rail IEC/EN 60715 outputs into Rooms and Channels. Vertical Clearance 150mm DIN Bus: 0.5–1.5mm² (20–15 AWG) Connections Cable Size Input: 1.0–2.5mm² (17-13 AWG) DIN Bus - 4 way screw terminal RWN - RJ45 Port Terminals/Ports RWN - RJ11 Port DC Input - Push terminal Electrical Input Supply Voltage 24V DC via DIN-PSU-100 - Over Current Protection - Over Voltage Protection Protection - Under Voltage Lockout - Reverse Polarity Protection - Soft Start - DIN-4T = 8 DPU DIN DPU Limit 64 DPU - DIN-8S = 8 DPU - DIN-4C = 8 DPU Via RJ-45 - 30 RWN Power Capacity Via RJ-11 - 1 Dimensions RoHS Certification & Standards UKCA, CE EN 60669-2-5 Communication DIN Bus, RWN Environmental Operating Temperature +2 °C to +40 °C Temperature +2C to +40C Climate Range Humidity +5% to 90% non-condensing Installation and Setup For information on installing and setting up the DIN-LINK, see the Instruction Manual. Document Version 1.0.1 telephone +44 (0) 1634 226666 | www.rakocontrols.com Specifications and data are subject to change without notice. © 2026 Rako Controls Ltd