Lutron HomeWorks Lamp Dimmer HQRK-P20-240G – product specifications (3691160b)

Page 1

product specifications 3691160b 10.12.2020 HomeWorks Lamp Dimmer HomeWorks lamp dimmers are simple to install and easy to use. Lamp dimmers allow floor and table lamps to be added to a system quickly and easily using Clear Connect RF Technology. They can conveniently be hidden behind furniture. HomeWorks lamp dimmers use Lutron patented Clear Connect RF technology which provides reliable, wireless communication with other HomeWorks devices. Each lamp dimmer can be controlled individually using a Pico wireless control. Using a HomeWorks hybrid repeater allows devices to be part of a whole house solution that can be controlled remotely from anywhere in the world. Features • The lamp dimmer is trailing-edge capable of 1 W minimum load and up to 150 W or 1 A maximum of Model Number Frequency Country / Region LED and 200 W of incandescent or halogen loads. HQRK-P20-240G-XX** 868 MHz UK, UAE • Allows remote control from anywhere in the space HQRK-P20-240F-XX** 868 MHz EU when paired with Pico wireless controls. 434 MHz • When used with a HomeWorks hybrid repeater*, HQRQ-P20-240G-XX** Limited Hong Kong the lamp dimmer can be programmed and controlled via lighting scenes, scheduled daily events, the Lutron Connect app, and other HomeWorks system features. Also, the lamp dimmer can be controlled from anywhere in the world. • To maximize energy savings and provide hands-free operation, the lamp dimmer can be turned on / off automatically via Radio Powr Savr occupancy / vacancy sensors.

* Requires HomeWorks QS software 15.5 or later. ** See Colors on page 6. Customer Assistance: www.lutron.com/support 1 +44.(0)20.7702.0657 (Europe)

Page 2

product specifications 3691160b 10.12.2020 HomeWorks Lamp Dimmer Specifications Power 220 – 240 V~ 50/60 Hz Typical Power < 0.5 W Consumption Test conditions: Load and LED are off Communication Frequency 868 MHz 434 MHz Limited Regulatory Approvals CE Environment Ambient operating temperature: 0 °C to 40 °C (32 °F to 104 °F), 0% to 90% humidity, non-condensing. Indoor use only. HomeWorks lamp dimmers communicate with the system through Radio Communications Frequency (RF). They must be located within 18 m (60 ft) line-of-sight or 9 m (30 ft) through walls of a Pico wireless control, Radio Powr Savr sensor, or hybrid repeater. ESD Protection Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2. Tested to withstand surge voltages without damage or loss of operation, Surge Protection in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits. Power Failure Power failure memory: should power be interrupted, the lamp dimmer will return to its previous state when power is restored. With repeater: Up to 100 devices (e.g., load controls, lamp dimmers, Pico wireless controls, Radio Powr Savr sensors, shades, and repeaters) are supported per RF link. The processor counts as one device and four locations Device Limits are reserved for hybrid repeaters. Note: Lamp dimmers have load type and capacity limits. For more information, see Load Capacity. Warranty www.lutron.com/TechnicalDocumentLibrary/Intl_Warranty.pdf Rated IP20, Pollution Degree 2 Degree of protection against electric shock: Class II appliance Single-pole, single load Forced cooling is not required Regulatory Information Rated Impulse Voltage: 2500 V Internal non-resettable Fuse Rating is 3.15 A/240 V~ Material Group IIIa 175<PTI<400 Glow Wire Level 1 Continuous Duty-type S1 LED load ratings derived from IEC 60669-1: 150 W with 9 A2 s inrush Customer Assistance: www.lutron.com/support 2 +44.(0)20.7702.0657 (Europe)

Page 3

product specifications 3691160b 10.12.2020 HomeWorks Lamp Dimmer Dimensions All dimensions are shown as: mm (in). Images below are for reference only. Front View Side View Cord Length Receptacle Plug Cord Cord Length Length 500 1000 (20) (40) 84 1 (3 ⁄4) 58 30 1 1 (2 ⁄4) (1 ⁄8) Customer Assistance: www.lutron.com/support 3 +44.(0)20.7702.0657 (Europe)

Page 4

product specifications 3691160b 10.12.2020 HomeWorks Lamp Dimmer Installation Plug the load cord into a Insert the plug of the lamp dimmer lamp dimmer receptacle. into the wall outlet. Lamp dimmer Lamp dimmer plug Load cord Lamp dimmer receptacle Load Capacity Voltage Load Types 220 – 240 V~ 1 A 200 W – Incandescent, halogen 50/60 Hz 1 A 150 W – LED * LED DEL NOTE: The lamp dimmer is designed to dim one incandescent, LED, or tungsten halogen table or floor lamp. Use with lighting loads only. It is recommended to plug the lamp directly into the dimmer receptacle and not through a multi-plug adaptor, power strip, or extension cord. Do not use to control a lamp that contains an integral dimmer or a touch lamp. For a lamp with an integral 3-way switch, the switch should be set to full on position. The lamp dimmer may not work with dioded light bulbs. Always use a load that complies with the Load Capacity table above. Always use a light bulb that remains within the wattage rating of the light fixture. The lamp dimmer is compatible with trailing edge loads. Not rated for magnetic low-voltage (MLV) loads. * LED Load Capacity: LED current ratings must be below 1 A. If no current rating is available, wattage must be below 150 W. Customer Assistance: www.lutron.com/support 4 +44.(0)20.7702.0657 (Europe)

Page 5

product specifications 3691160b 10.12.2020 HomeWorks Lamp Dimmer Operation Lamp Dimmer Single LED Green – B links when load is toggled Flashes during association Red – Blinks when error Toggle Button Press to toggle ON / OFF (goes to last level) RF Range Hybrid Repeater Radio Powr Radio Powr Savr sensor Savr sensor 9 m (30 ft) Radio Powr maximum Savr sensor Lamp Dimmer Pico Hybrid Repeater Lamp Hybrid Repeater Pico Hybrid Repeater wireless Lamp Hybrid Repeater Pico Repeater Status Repeater Status Repeater Status Hybrid P 1 2 3 4 P 1 2 3 4 P 1 2 3 4 wireless Dimmer Communication Communication Dimmer Communication RF Wired wireless RF Wired control RF Wired Setup Test Activate Setup Test Activate Setup Test Activate Repeater Test Add control Test Add Test Add control Power Repeater Link Power Repeater Link Power Repeater Link 9 V CO 24 MU MU 9 V CO24 MU MU 9 V CO24 MU MU M1 V2 X3 X4 M1V2 X3 X4 M1V2 X3 X4 Hybrid Repeater Repeater Status P 1 2 3 4 Communication RF Wired Setup Test Activate Test Add Power Repeater Link 9 V CO 24 MUMU M1 V2X3 X4 9 m (30 ft) 9 m (30 ft) maximum maximum RF Link RF Link 305 m (1000 ft) maximum 18 m (60 ft) maximum 305 m (1000 ft) maximum wire length per run between hybrid repeaters wire length per run All devices must be located within 9 m (30 ft) of a hybrid repeater. The range can be extended with up to four HomeWorks hybrid repeaters (HQx-REP) on a single RF link. Customer Assistance: www.lutron.com/support 5 +44.(0)20.7702.0657 (Europe)

Page 6

product specifications 3691160b 10.12.2020 HomeWorks Lamp Dimmer Model Numbers HQRx-P20-240x-xx Frequency / Plug Type Color Channel Code Frequency / Channel Code K = 868 MHz Q = 434 MHz Limited Plug Type G = Type G; UK; BS 1363 F = Type F; EU; Plug = CEE 7 / 7; Socket = CEE 7 / 3 Colors BL = Black AW = Arctic White Lutron, Clear Connect, HomeWorks, Lutron Connect, Radio Powr Savr, and Pico are trademarks or registered trademarks of Lutron Electronics Co., Inc. in the US and/or other countries. All other product names, logos, and brands are property of their respective owners. Customer Assistance: www.lutron.com/support 6 +44.(0)20.7702.0657 (Europe)