Future Automation TSLM-2 technical sheet

Page 1

TSLM-2 TELESCOPIC SCREEN LIFT MEDIUM TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 003 WWW NET . . SHEET 1 FUTUREAUTOMATION

Page 2

TSLM-2 TELESCOPIC SCREEN LIFT MEDIUM SPECIFICATION MEASUREMENTS Product Dimensions 742mm (29 3/16") x 1280mm (50 3/8") x 240mm (9 7/16")

Minimum Screen Height 695mm (27 3/8") Maximum Screen Height 875mm (34 7/16") Minimum Screen Width 1280mm (50 3/8") - (Lower Width option available apon request) Maximum Weight Capacity 75Kg (165lb) (Screen + Enclosure) Product Weight 40Kg (88lb) Packaging Dimensions TBC Shipping Weight TBC Movement Type Motorised Power Supply Required 110V - 240V Power Consumption Max. 250W Power Consumption Standby 3W Mounting Patterns Supported VESA 200, 300, 400 W x 200, 300, 400 H - (Other VESA patterns apon request) Control Options IR Remote, RS232, Contact Closure Product Options / Features Specific B&O and Loewe mounts / adapters, Custom RAL paint finishes, Outdoor suitable version Package Contents Mechanism, IR remote control Marine Suitable YES Outdoor Suitable NO TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 003 WWW NET . . SHEET 2 FUTUREAUTOMATION

Page 3

TSLM-2 TELESCOPIC SCREEN LIFT MEDIUM GENERAL INFORMATION LID and ENCLOSURE - To be VESA 200, 300 & 400 made by others. Total allowable mounting patterns covered. weight for all timber work and the Bracket has full height screen 75Kg. adjustment . The lid must be easily removed if the mechanism was stuck in the down position. A lift off arrangement being ideal. The fixings for the screen are then accessible so it can then be lifted off to give access to the motor. Screen cables enter Screen here. cables enter here. Front access is required to install the lift. TRIM PANEL - Not supplied. Allow 20mm+ in front of the screen if This trim panel is lifted up as the mechanism is to be partially sunk the screen is lowered into the below floor level. cabinet. Brackets are supplied to attach it. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 003 WWW NET . . SHEET 3 FUTUREAUTOMATION

Page 4

TSLM-2 TELESCOPIC SCREEN LIFT MEDIUM CABINET SIZING 13/16" 20 All sizing calculations are based off a 20mm [0.79"] Box Enclosure Internal Cabinet Depth = Screen Depth + 230 [9 1/16"] box enclosure panel thickness. Any increases in Cap Height this thicknes will increace the required space. A Box Enclosure Depth = C Screen Depth + 100 [3 15/16"] B B Screen 3 11/16" DETAIL C 93 Depth SCALE 1 : 3 Back of cabinet to Aperture Aperture Depth = Screen Depth + 116 [4 9/16"] A Screen Height SECTION B-B Min. 695 [27 3/8"] Max. 875 [34 7/16"] SCALE 1 : 6 738 29 1/16" 13/16" 20 Mechanism Back Tray Height Box Enclosure Height = Screen Height + 30 [1 3/16"] Internal Cabinet Height = Screen Height + 55 [2 3/16"] SECTION A-A Screen Width SCALE 1 : 6 Box Enclosure Width = Screeen Width +50 [1 15/16"] Apeture Width = Screen Width + 66 [2 5/8"] Internal Cabinet Width = Screen Width + 100 [3 15/16"] TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 003 WWW NET . . SHEET 4 FUTUREAUTOMATION

Page 5

TSLM-2 TELESCOPIC SCREEN LIFT MEDIUM 15° Sugested Taper BOX ENCLOSURE DETAILING The Screen, Enclosure, Lid and the Trim 0" panel must weigh no more than 75Kg. 0 1/4" Block to locate E 7 in enclosure 13/16" Optional ventilation 20 DETAIL E SCALE 1 : 1 Fixing Suggested taper detail to Brackets help prevent finger traps 25 3/16" Blocks to locate lid. 640 44 7/8" D D 1140 26" 660 11 13/16" 22 1/16" 300 560 1/2" 12 Trim Panel 22 13/16" 13/16" 1/4" 580 20 7 3 9/16" 23 5/8" 90 600 SECTION D-D 13 3/8" 340 Enclosure also fixed along here TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 003 WWW NET . . SHEET 5 FUTUREAUTOMATION

Page 6

TSLM-2 TELESCOPIC SCREEN LIFT MEDIUM INSTALL INSTRUCTIONS F Mount fixing bolts • Check that the cabinet, enclosure, lid and the trim panel are made to the details shown on the previous pages. • You can stand the mechanism up on its base to test it before putting in the cabinet. See control document for details. Use the IR remote with caution and always cover the STOP button in case of issues. Mount bracket • Centrally fix the mechanism to the back of the cabinet in the places shown. Enclosure • Run up and down and then add the enclosure. • Adjust the position of the enclosure and adjust the up and down switches with caution. Temporarily add lid to check height. • Run screen cables up into enclosure. Secure cables as they enter and leave the cable tracks with cable ties. Make sure no cables can get tangled or caught as the Trim Panel Fixing holes mechanism moves. • Add trim panel. And adjust. This trim panel moves up Either or both into position as the TV lifts. Observe this movement and cable tracks can Up Switch understand it before fixing. be used. Down Switch • The upright plate can be adjusted in height by moving it to a different set of keyholes. Fix the plate to the back of the screen and mount to mechanism using the keyholes. Ensure the plate is secured using the fixing bolts located at the top of the keyhole plates. Fixing holes • Check movement with screen with caution. SECTION F-F F TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 003 WWW NET . . SHEET 6 FUTUREAUTOMATION

Page 7

TSLM CONTROL BOX CONTROL BOX FOR TELESCOPIC SCREEN LIFT

307.5 12 1/8"

RS232 PORT IR OUTPUT CABLE LOOM INDICATOR LED CONTACT LENGTH APPROX CLOSURE 118 1/8" PORT 3000 IR LEAD INPUT 3.5mm [0.14"] JACK EMERGENCY STOP CONNECTOR

20 max 0.79 max 1/4"

5/16"

8 CORE CABLE 52.1 MOTOR 2 1/16"

10mm [0.4"] dia. MAINS INPUT 3 CORE CABLE EU SPEC: 0.5mm² 5.2 3/16" 5 7/8" SWITCH LIMITS

US SPEC: 20AWG 149.5 6mm [0.25"] dia. EU SPEC: 0.5mm² NOTES US SPEC: 20AWG • POWER SUPPLY UNIT (PSU) WILL ALLOW 110V OR 240V AC INPUT. THE SAME PSU IS USED FOR EU OR US MAINS SUPPLIES. • OTHER THAN CONTROL CABLES, ALL CABLES TERMINATE AT CONTROL BOARD VIA STANDARD PHOENIX CONNECTORS. • CABLE LOOM LENGTH SUPPLIED AT APPROX. 3m [118"]. LOOM CAN BE EXTENDED UP TO MAXIMUM OF APPROX. 10m [400"]. • MINIMUM CABLE BEND RADIUS 25mm [1"]. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 7 FUTUREAUTOMATION

Page 8

TSLM TELESCOPIC SCREEN LIFT MEDIUM General Mitigations: INTEGRATION CONSIDERATIONS • Implement a hold to run/dead man switch operation. • Control methods should be located within direct line of site of the mechanism. High Risk - Crush Hazard • Implement password or key switch protected operation. Crush hazard between the top panel and the Top panel cabinet top as the lift closes. Mitigation The top panel can also be floating/not permanently fixed to allow vertical movement if an obstruction is caught between it and the cabinet top. Keep all shadow gaps to a minimum (no smaller than 3mm [1/8"]) to reduce the risk of obstruction. Low Risk - Falling Objects Hazard Falling objects hazard if items are left on the top panel. Mitigation High Risk - Crush Hazard See general mitigations. Crush hazard between the cabinet top and the base panel when the mechanism is opening. Mitigation Box enclosure Keep all shadow gaps to a minimum (no smaller than 3mm [1/8”]) to reduce the risk of obstruction. Cabinet Low Risk - Cable Snagging Hazard Cables could be snagged if not properly managed through and around the mechanism, High Risk - Crush Hazard causing damage to the mechanism and Crush hazard below the mechanism when electronics. mechanism is closing. Mitigation Mitigation Ensure sufficient cable slack is allowed around Ensure area below the mechanism is kept clear movement joints to prevent stretching and/ or at all times when the mechanism is being used. damage to the cables and/ or mechanism. If installing or maintaining the mechanism do so

with the mechanism turned off. CONSIDERATIONS SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 1 FUTUREAUTOMATION