Future Automation SPS-VS-8 technical sheet

Page 1

SPS-VS-8 SLIDING PANEL MECHANISM - VERTICAL SPLIT TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 1 FUTUREAUTOMATION

Page 2

SPS-VS-8 SLIDING PANEL MECHANISM - VERTICAL SPLIT SPS-V - VERTICAL - SINGLE PANEL MODEL DESCRIPTION MIN SCREEN HEIGHT MAX SCREEN HEIGHT SPS-V-5 Vertical - Single Panel 700 [27 9/16"] 800 [31 1/2"] SPS-V-6 Vertical - Single Panel 801 [31 9/16"] 950 [37 3/8"] SPS-V-7 Vertical - Single Panel 951 [37 7/16"] 1100[ 43 5/16"] SPS-V-8 Vertical - Single Panel 1101[ 43 3/8"] 1250[ 49 3/16"] SPS-VS - VERTICAL SPLIT - DOUBLE PANEL SPS-VS-6 Vertical - Double Splitting Panel 801 [31 9/16"] 950 [37 3/8"] SPS-VS-7 Vertical - Double Splitting Panel 951 [37 7/16"] 1100[ 43 5/16"] SPS-VS-8 Vertical - Double Splitting Panel 1101[ 43 3/8"] 1250[ 49 3/16"] SPS-HZ - HORIZONTAL - SINGLE PANEL MODEL DESCRIPTION MIN SCREEN WIDTH MAX SCREEN WIDTH SPS-HZ-6 Horizontal - Single Panel 1400 [55 1/8"] 1600 [63"] SPS-HZ-7 Horizontal - Single Panel 1601 [63 1/16"] 1850 [72 13/16"] SPS-HZ-8 Horizontal - Single Panel 1851 [72 7/8"] 2100 [82 11/16"] SPS-HZS - HORIZONTAL SPLIT- DOUBLE PANEL SPS-HZS-6 Horizontal - Double Splitting Panel 1400 [55 1/8"] 1600 [63"] SPS-HZS-7 Horizontal - Double Splitting Panel 1601 [63 1/16"] 1850 [72 13/16"] SPS-HZS-8 Horizontal - Double Splitting Panel 1851 [72 7/8"] 2100 [82 11/16"] TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 2 FUTUREAUTOMATION

Page 3

SPS-VS-8 SLIDING PANEL MECHANISM - VERTICAL SPLIT 2. Panel Retracts 1. Panel Closed SPECIFICATION MEASUREMENTS Minimum Screen Height 1101[ 43 3/8"] Maximum Screen Height 1250[ 49 3/16"] Minimum Screen Width 1800 [70 7/8"] Maximum Screen Width 2300 [90 9/16"] Maximum Moving Panel Weight 30Kg (66lbs) per panel Maximum Screen Weight 100Kg (220lbs) Total Mechanism Weight TBC Packaging Dimensions (LxWxH) TBC Shipping Weight TBC 4. Screen Advances 3. Panel Lifts Movement Type Motorised Power Supply Required 110V - 240V AC Power Consumption Max. 120W Power Consumption Standby 3W Mounting Patterns Supported VESA 200 - 800 W x 200 - 600 H Control Options IR Remote, RS232, Contact Closure Product Options / Features QA2 pairing option Package Contents Mechanism, IR remote control, Bolt Pack Marine Suitable Yes (Indoor) TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 3 FUTUREAUTOMATION

Page 4

Height Below Height Above SPS-VS Size Screen Height Instal Height Screen Center Line Screen Center Line 43 3/8" 46 1/4" 102 3/4" 53 3/8" 49 7/16" 1101 1175 2610 1355 1255 Size 8 49 3/16" 56 1/2" 53 3/8" 3 1/8" 46 1/4" 1250 Screen + 1435 1355 Screen + 80 1175 SPS-VS-8 SLIDING PANEL MECHANISM - VERTICAL SPLIT clearance overidden CABINET DIMENSIONS - WIDTH AND HEIGHT Height Below Height Below B Screen Height Install Height 5 5/16" 5 5/16" Screen Center Line Screen Center Line SECTION A-A 135 135 43 3/8" 46 1/4" 102 3/4" 53 3/8" 49 7/16" Internal Cabinet Width = Screen Width + 280 1101 1175 2610 1355 1255 SECTION B-B SECTION B-B 46 1/4" 49 3/16" 56 1/2" 53 3/8" 3 1/8" Maximum Screen Height Minimum Screen Height 1175 1250 Screen + 1435 1355 Screen + 80 Screen Width Install Width 80 11" 3 1/8" 70 7/8" 90 9/16" Screen Width + 280 1800 2300 50 B 1 15/16" L Clearance C (Screen Height - 5) / 2 43 3/8" Moving Panel Height = = Screen Height + 1101 L

C 1255 49 7/16" 46 1/4" 20 1175 13/16"

1435 49 3/16" Height Above Screen 56 1/2" 1250 A A 102 3/4" Opening Width = 2610 Screen Width +10 Opening Height = Height Above Screen Screen Height +10 49 7/16" 1255 2610 2590 102 3/4" 53 3/8" 101 15/16" Opening Height 1355 Mechanism Height

Minimum Instal Height L L 56 1/2" C C 20 1435 Opening Height = Screen Height +10 13/16" Instal Height = Screen Height + Opening Width =

3 1/8" Screen Width +10 80 1355 1355 53 3/8" 53 3/8" 70 7/8" 1800 The install height for the SPS-VS-8 is determined by the size of the screen being installed. 90 9/16" Height Below Screen Height Below Screen C 2300 The Height Below Screen will always be 1355 [53 3/82] whereas the height above the L C screen is calculated by screen height + 80 [3 1/8"]. If this calculation comes out under L 11" C the size of the SPS mechanism that is above the screen 1255 [49 7/16"] then the L (Screen Height - 5) / 2 Moving Panel Height = 280 mechanism size needs to be used insted. C The SPS-VS will always require additional space below the seceen compared to L TECHNICAL SHEET C above the screen . L UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 B B WWW NET . . SHEET 4 FUTUREAUTOMATION

Page 5

SPS-VS-8 SLIDING PANEL MECHANISM - VERTICAL SPLIT Screen - OUT Screen - IN 1 3/16" CABINET DIMENSIONS - DEPTH 30 Moving Panel D A The minimum depth of 205mm [8 1/16"] allows for a Thickness maximum screen depth of 30mm [1 3/16"]. Screens with a greater thickness will need the cabinet 1 15/16" 13/16" 50 depth to increase i.e. a 100mm [3 15/16"] thick screen 20 Max. Front Panel will require a cabinet of 275mm [10 13/16""]. Front Panel and Batton Thickness Thickness Screens thinner than 30mm [1 3/16"] must still use the minimum 205mm [8 1/16"] cabinet depth. DETAIL D A SCALE 1 : 3 A 2 9/16" 65 Retract Recomended batten to support front panel above opening The moving panel retracts back by 65mm [2 9/16"] before splitting. For this reason it is advised the front panel work and support batten is no more than 50mm [1 15/16"] thick to give 15mm [9/16"] clearance. A Thicker panels are possible, but will add to the cabinet depth and require customisation to the mechanism design. 8 1/16" 3/8" 205 10 Minimum Internal Mount Bracket to TECHNICAL SHEET Cabinet Depth Back of Front Panels UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 5 FUTUREAUTOMATION

Page 6

A SPS-VS-8 SLIDING PANEL MECHANISM - VERTICAL SPLIT ADVANCE - SERVICE ADVANCE - IN AB - ADVANCE BRACKET ADVANCE - OUT The Advance Bracket has a service mode that can be used during installation and servicing of the mechanism and the screen. This allows the screen to be pulled out from the wall to provide access to rear of the screen and inside the mechanism during fitting. A A 3 15/16" 100 43 5/16" 1100 A A 24 7/16" 622 Max Mount Height A 31 1/2" 800 Max Mount Width 17 11/16" 3 15/16" 450 100 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 6 FUTUREAUTOMATION

Page 7

SPS-VS-8 SLIDING PANEL MECHANISM - VERTICAL SPLIT CABINET DETAILING & ACCESS The SPS mechanism requires certain access for installation Advance Bracket and to be serviced. For installation the top panel must be removable to provide access to all the fixing points of the SPS mechanism. For servicing the best option is to have the areas to the left and right of the opening on hinges. This will provide enough Top Panel access to everything that will be needed to service and (removable for installation) maintain the mechanism. Alternatively the side panels could Hinging side panel be made to be easily removable on suitable catches / fixings. (removable for service & maintenance) The Moving Panel Mechanism mounts to the side walls of the cabinet, and the Advance Bracket mounts to the back of the Moving panel bracket cabinet. It is essential that these surfaces can take the weight of the mechanism, moving panel and screen. The mechanism is supplied with a control box on a 3m [10'] flying lead. This must be fitted in an easily accessible location. Hinging side panel This will be the first item to be checked if there is an issue (removable for service with the mechanism. Mains power and control connections & maintenance) (IR sensor / receiver, contact closure, RS232) are all made at the control box. Motor Telescopic Drive shaft Mechanism Cables Power Cables Control box wiring loom must be routed to the bottom left corner of the cabinet To Mains Power Bottom panel (removable for service & maintenance) TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 7 FUTUREAUTOMATION

Page 8

SPS-VS-8 SLIDING PANEL MECHANISM - VERTICAL SPLIT CONTROL BOX

TBC 207 8 1/8"

RS232 PORT IR OUTPUT TBC INDICATOR LED CONTACT CLOSURE PORT EMERGENCY STOP IR LEAD INPUT CONNECTOR 3.5mm [0.14"] JACK max CABLE LOOM 20 LENGTH APPROX 13/16" 118 1/8" 8 CORE CABLE 3000 SPS SWITCHES 10mm [3/8"] dia. EU SPEC: 0.5mm² US SPEC: 20AWG 1/4"

2 CORE CABLE 8 SPS MOTOR

5/16" 10mm [3/8"] dia. 4 CORE CABLE

EU SPEC: 4mm² SPS MOTOR 52 US SPEC: 12AWG 2 1/16" 10mm [0.4"] dia.

MAINS INPUT EU SPEC: 0.75mm² 8 CORE CABLE US SPEC: 18AWG 5 5 7/8" ADVANCE BRACKET 3/16" 150 10mm [3/8"] dia.

EU SPEC: 0.5mm² US SPEC: 20AWG NOTES • POWER SUPPLY UNIT (PSU) WILL ALLOW 110V OR 240V AC INPUT. THE SAME PSU IS USED FOR EU OR US MAINS SUPPLIES. • OTHER THAN CONTROL CABLES, ALL CABLES TERMINATE AT CONTROL BOARD VIA STANDARD PHOENIX CONNECTORS. • CABLE LOOM LENGTH SUPPLIED AT APPROX. 3m [118"]. LOOM CAN BE EXTENDED UP TO MAXIMUM OF APPROX. 10m [400"]. • MINIMUM CABLE BEND RADIUS 25mm [1"]. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 8 FUTUREAUTOMATION

Page 9

1. Mount the SPS side channels to the side walls of the cabinet. SPS-VS-8 Ensure the mechanism mount brackets are positioned 10mm back from the edge of the front SLIDING PANEL MECHANISM - VERTICAL SPLIT panels. 2. <PARA >Install the telescopic drive shaft between both sides of INSTALLATION OVERVIEW Up Switch the mechanism. ensure that the moving panel brackets are at the same height. 3. Run the mechanism, adjust the up switch so that the carriages moves the height of the moving panel + 25mm [1"]. C Rear View 1. Mount the mechanism side channels to the side walls of the cabinet. Ensure the mechanism Down Switch mount brackets are positioned 10mm back from the edge of the front panels. Up Switch Adjustment Loosen the bolt and slide the switch striker to the desired position. Ensure the bolt is tightened after adjustment. Switch Striker 2. Install the telescopic drive shaft between both sides of the mechanism. Ensure that the 4. Mount the moving panel to the moving panel brackets are at the same height. moving panel brackets 110mm from the base of the moving panel. 5. mount the moving panel back onto the mechanism, use the slots in the mount brackets to align the panel and get it into the desired position TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 9 FUTUREAUTOMATION

Page 10

SPS-VS-8 SLIDING PANEL MECHANISM - VERTICAL SPLIT INSTALLATION OVERVIEW 4. Mount the moving panel to the moving panel brackets 15mm 5. Mount the moving panel back onto the mechanism, use the slots in the from the base of the moving panel and 94mm in from the edge. mount brackets to align the panel and get it into the desired position. 3 11/16" 3 11/16" 3 11/16" 94 94 94 Rear View of moving panel

9/16" 110 110 4 5/16" 15 4 5/16"

1. Mount the SPS side channels to the side walls 3 11/16" of the cabinet. Ensure 94 9/16" Recommended to use 5mm the mechanism mount 15 shims to align the top moving brackets are positioned panel with the lower moving 10mm back from the panel. edge of the front panels. 9/16" 2. <PARA >Install the 15 telescopic drive shaft between both sides of Moving panel the mechanism. ensure bracket that the moving panel brackets are at the same height. Recommended to use 5mm shims to align the moving panel with the base of the aperture. 9/16" 15 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 10 FUTUREAUTOMATION