Future Automation SPS-HZ-7-QA2-60 technical sheet

Page 1

SPS-HZ-7 - QA2-60 SLIDING PANEL MECHANISM - HORIZONTAL TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 002 WWW NET . . SHEET 1 FUTUREAUTOMATION

Page 2

SPS-HZ-7 - QA2-60 SLIDING PANEL MECHANISM - HORIZONTAL SPS-V - VERTICAL - SINGLE PANEL MODEL DESCRIPTION MIN SCREEN HEIGHT MAX SCREEN HEIGHT SPS-V-5 Vertical - Single Panel 700 [27 9/16"] 800 [31 1/2"] SPS-V-6 Vertical - Single Panel 801 [31 9/16"] 950 [37 3/8"] SPS-V-7 Vertical - Single Panel 951 [37 7/16"] 1100[ 43 5/16"] SPS-V-8 Vertical - Single Panel 1101[ 43 3/8""] 1250[ 49 3/16"] SPS-VS - VERTICAL SPLIT - DOUBLE PANEL SPS-VS-5 Vertical - Double Splitting Panel 700 [27 9/16"] 800 [31 1/2"] SPS-VS-6 Vertical - Double Splitting Panel 801 [31 9/16"] 950 [37 3/8"] SPS-VS-7 Vertical - Double Splitting Panel 951 [37 7/16"] 1100[ 43 5/16"] SPS-VS-8 Vertical - Double Splitting Panel 1101[ 43 3/8""] 1250[ 49 3/16"] SPS-HZ - HORIZONTAL - SINGLE PANEL MODEL DESCRIPTION MIN SCREEN WIDTH MAX SCREEN WIDTH SPS-HZ-6 Horizontal - Single Panel 1400 [55 1/8"] 1600 [63"] SPS-HZ-7 Horizontal - Single Panel 1601 [63 1/16""] 1850 [72 13/16"] SPS-HZ-8 Horizontal - Single Panel 1851 [72 7/8"] 2100 [82 11/16"] SPS-HZS - HORIZONTAL SPLIT- DOUBLE PANEL SPS-HZS-6 Horizontal - Double Splitting Panel 1400 [55 1/8"] 1600 [63"] SPS-HZS-7 Horizontal - Double Splitting Panel 1601 [63 1/16""] 1850 [72 13/16"] SPS-HZS-8 Horizontal - Double Splitting Panel 1851 [72 7/8"] 2100 [82 11/16"] TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 002 WWW NET . . SHEET 2 FUTUREAUTOMATION

Page 3

SPS-HZ-7 - QA2-60 SLIDING PANEL MECHANISM - HORIZONTAL 2. Panel Retracts 1. Panel Closed SPECIFICATION MEASUREMENTS Minimum Screen Width 1601 [63 1/16""] Maximum Screen Width 1850 [72 13/16"] Minimum Screen Height 850 [33 7/16"] Maximum Screen Height 1250 [49 3/16"] Maximum Moving Panel Weight 15Kg (33lbs) Maximum Screen Weight 80Kg (176lbs) Total Mechanism Weight TBC Packaging Dimensions (LxWxH) TBC Shipping Weight TBC 4. Screen Advances 3. Panel Slides Movement Type Motorised Power Supply Required 110V - 240V AC Power Consumption Max. 120W Power Consumption Standby 3W Mounting Patterns Supported VESA 400, 300, 200 W x 400, 300, 200 H Control Options IR Remote, Contact Closure Product Options / Features AB pairing option Package Contents Mechanism, IR remote control, Bolt Pack Marine Suitable Yes (Indoor) TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 002 WWW NET . . SHEET 3 FUTUREAUTOMATION

Page 4

To determin the cavity height use the folowing • The Screen Advance Heavy bracket can SPS-HZ-7 - QA2-60 formula: accommodate a screen bolt pattern up to: VESA 800x600. Up to M8 diameter fixings. SLIDING PANEL MECHANISM - HORIZONTAL Cavity Height = (2 x Screen Height) + 80 • The bracket can be positioned within the opening as required based on TV VESA A If the cavity height is larger than the min. cavity height mount location. CABINET DIMENSIONS - WIDTH AND HEIGHT shown below that is your cavity height if not use the min. cavity height. B B Screen Width Install Width 1601 [63 1/16"] 1850 [72 13/16"] (2 x Screen Width) + 190 A Screen Height Install Height Opening Height = Screen Height +10 850 [33 7/16"] 1250 [49 3/16"] Screen Height + 280 Opening Width = Screen Width +10 B B SECTION A-A SECTION B-B 121 5/8" A 135 3090 5 5/16" Minimum Screen Height Mechanism Width Opening Height = Opening Width = Screen Width +10 Screen Height +10 Opening Width Moving Panel Width = Screen Width 1 15/16" Opening Height 50 13/16" 4 5/16" A Clearance 20 110 121 5/8" SECTION B-B 3090 Maximum Screen Height Mechanism Width 135 5 5/16" The SPS-HZ will always require 110mm [4 5/16"] to the side the opening oposite the slide direction. The remaining height required is determined by the width of the screen being installed in the mechanism. SECTION A-A Install Height = (2 x Screen Width) + 190 The install height is calculated be the following formula (2 x Screen Height) + 190. If this comes out under the mechanism height the mechanism height needs to be used instead. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 002 WWW NET . . SHEET 4 FUTUREAUTOMATION

Page 5

SPS-HZ-7 - QA2-60 SLIDING PANEL MECHANISM - HORIZONTAL AA CABINET DIMENSIONS - DEPTH 1 3/16" 30 The moving panel retracts back by 65mm [2 9/16"] Moving Panel The minimum depth of 245mm [9 5/8"] allows for a maximum before Sliding. For this reason it is advised the front Thickness screen depth of 30mm [1 3/16"]. panel work and support batten is no more than 50mm [1 15/16"] thick to give 15mm [9/16"] clearance. Screens with a greater thickness will need the cabinet depth to increase i.e. a 100mm [3 15/16"] thick screen will require a cabinet Thicker panels are possible, but will add to the cabinet of 315mm [12 3/8"]. depth and require customisation to the mechanism design. Screens thinner than 30mm [1 3/16"] must still use the minimum 12 3/8" DETAIL D 315 245mm [9 5/8"] cabinet depth. SCALE 1 : 3 2 9/16" AA 1 15/16" 65 50 Retract Max. Front Panel and Batton Thickness Screen - IN 9 5/8" Recomended battens to support 245 front panel above opening Minimum Internal Cabinet Depth Screen - OUT 13/16" 20 D Front Panel Thickness TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 002 WWW NET . . SHEET 5 FUTUREAUTOMATION

Page 6

SPS-HZ-7 - QA2-60 SLIDING PANEL MECHANISM - HORIZONTAL A CABINET DETAILS - RIGHT SLIDE Screen Width Install Width 1601 [63 1/16"] 1850 [72 13/16"] (2 x Screen Width) + 190 Opening Width = Screen Width +10 Screen Height Install Height Opening Height = Screen Height +10 850 [33 7/16"] 1250 [49 3/16"] Screen Height + 280 A The SPS-HZ can be inverted so the panel slides right instead. The mechanism used is the same as in the original orientation, the mechanism is just rotated through 180 . B B 1. Panel Retracts 2. Panel Slides Right A A A A

135 5 5/16" SECTION B-B Maximum Screen Height 1 15/16" 50 4 5/16" 13/16" 110 20 Clearance Opening Width Moving Panel Width = Screen Height

135 Internal Cabinet Height = Screen Width + 280 5 5/16" 121 5/8" 3090 Mechanism Width SECTION A-A Install Width = (2 x Screen Height) + 190 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 002 WWW NET . . SHEET 6 FUTUREAUTOMATION

Page 7

SPS-HZ-7 - QA2-60 SLIDING PANEL MECHANISM - HORIZONTAL ADVANCE - IN QA2-60 - QUAD ARM The Quad Arm has a service mode that can be used during installation and servicing of the mechanism and the screen. This allows the screen to be advanced out from the wall to ADVANCE - OUT provide access to rear of the screen and inside the mechanism AA during fitting.

5 1/2"140 AA ADVANCE - SERVICE AA 919 36 3/16" AA ADVANCE - SERVICE 700 27 9/16" 23 5/8" Max Mount Height 40° 600 Maximum QA2-60 swivel is 75 . Max Mount Width However depending on the screen and cabinet depth this will need to be reduced to prevent the screen being obscured by the cabinet. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 002 WWW NET . . SHEET 7 FUTUREAUTOMATION

Page 8

SPS-HZ-7 - QA2-60 SLIDING PANEL MECHANISM - HORIZONTAL CABINET DETAILING & ACCESS The SPS mechanism requires certain access for installation and to be serviced. Side Panel (removable for installation) For installation the side panel must be removable to provide access to all the fixing points of the SPS mechanism. For servicing the best option is to have the areas to the top and bottom of the opening on hinges. This will provide enough access Hinging top panel to everything that will be needed to service and maintain the (removable for service & mechanism. Alternatively these panels could be made to be easily maintenance) removable on suitable catches / fixings. The Moving Panel Mechanism mounts to the top and bottom walls of the cabinet, and the Advance Bracket mounts to the back of the cabinet. It is essential that these surfaces can take the weight of the Moving Panel Bracket mechanism, moving panel and screen. The mechanism is supplied with a control box on a 3m [10'] flying QA2-60 lead. This must be fitted in an easily accessible location. This will be the first item to be checked if there is an issue with the mechanism. Mains power and control connections (IR sensor / receiver, contact closure) are all made at the control box. To Mains Power Telescopic Drive shaft Hinging bottom panel (removable for service & maintenance) Motor RS232 Link Moving Panel Bracket Control box wiring loom must Mechanism Cables be routed to the bottom right corner of the cabinet. Power Cables TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 002 WWW NET . . SHEET 8 FUTUREAUTOMATION

Page 9

SPS-HZ-7 - QA2-60 SLIDING PANEL MECHANISM - HORIZONTAL CONTROL BOX NOTE: RS232 CONTROL METHOD UNAVAILABLE.

8 1/8"207 RS232 PORT IR OUTPUT HZ INDICATOR LED CONTACT CLOSURE PORT EMERGENCY STOP IR LEAD INPUT CONNECTOR 3.5mm [0.14"] JACK CABLE LOOM max LENGTH APPROX 20 118 1/8" 13/16" 8 CORE CABLE 3000 SPS SWITCHES 10mm [3/8"] dia. EU SPEC: 0.5mm² 8 CORE CABLE US SPEC: 20AWG 1/4" ADVANCE BRACKET

10mm [3/8"] dia. 8 EU SPEC: 0.5mm² 5/16" US SPEC: 20AWG 4 CORE CABLE 2 CORE CABLE SPS MOTOR 52 SPS MOTOR 2 1/16" MAINS INPUT 10mm [0.4"] dia. 10mm [3/8"] dia. EU SPEC: 0.75mm² EU SPEC: 2.5mm² US SPEC: 18AWG 5 5 7/8" US SPEC: 14AWG 3/16" 150 NOTES • POWER SUPPLY UNIT (PSU) WILL ALLOW 110V OR 240V AC INPUT. THE SAME PSU IS USED FOR EU OR US MAINS SUPPLIES. • OTHER THAN CONTROL CABLES, ALL CABLES TERMINATE AT CONTROL BOARD VIA STANDARD PHOENIX CONNECTORS. • CABLE LOOM LENGTH SUPPLIED AT APPROX. 3m [118"]. LOOM CAN BE EXTENDED UP TO MAXIMUM OF APPROX. 10m [400"]. • MINIMUM CABLE BEND RADIUS 25mm [1"]. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 002 WWW NET . . SHEET 9 FUTUREAUTOMATION

Page 10

SPS-HZ-7 - QA2-60 SLIDING PANEL MECHANISM - HORIZONTAL INSTALLATION OVERVIEW 2. Install the telescopic drive shaft between both sides of the mechanism. Ensure that the moving panel brackets are at the same height. Rear View Top Panel (removable for installation) Up Switch Adjustment Moving Panel Mechanism C Loosen Bolt and slide the switch Mount brackets (same on both sides) striker to desired position. Ensure bolt is tightened after adjustment. Hinging side panel Hinging side panel (removable for service & Switch Striker (removable for service Down Switch maintenance) & maintenance) Moving panel bracket Moving Panel Mechanism Motor Telescopic Drive shaft 3. Run the mechanism, adjust the up switch so that the carriages move the height of you panel + 25mm [1"]. Advance Bracket 1. Mount the Mechanism side channels to the side walls of the cabinet. Ensure the mechanism mount brackets are positioned 10mm back from the edge Up Switch of the front panels. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 002 WWW NET . . SHEET 10 FUTUREAUTOMATION

Page 11

SPS-HZ-7 - QA2-60 SLIDING PANEL MECHANISM - HORIZONTAL INSTALLATION OVERVIEW 4. Mount the moving panel to the moving panel brackets 110mm 5. Mount the moving panel back onto the mechanism, use the slots in the from the base of the moving panel and 94mm in from the edge. mount brackets to align the panel and get it into the desired position. 3 11/16" 3 11/16" 94 94 Rear View of moving panel

110 110 3 11/16" 4 5/16" 4 5/16" 94 3 11/16" 94 7 7/8" 200 Recommended to use 5mm shims to align the moving panel 7 7/8" with the side of the aperture. 200 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 002 WWW NET . . SHEET 11 FUTUREAUTOMATION