Future Automation PICSIDE2 technical sheet

Page 1

EDIT CUSTOM PROPERTIES 29. TITLE TO DESIRED PIC SD 2 PRODUCT CODE PICTURE SIDE MECHANISM 30. SUBHEADING TO DESIRED PRODUCT DESCRIPTION EDIT CUSTOM PROPERTIES TECHNICAL SHEET 31. ISSUE NO. UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 005 TO DESIRED ISSUE NUMBER WWW NET . . SHEET 1 FUTUREAUTOMATION

Page 2

PIC SD 2 PICTURE SIDE MECHANISM SPECIFICATION MEASUREMENTS Maximum Screen Size 55" (1397mm) Maximum Weight Capacity 10Kg (22lb) Maximum Speed 120mm/s Maximum Travel 1435mm (56 1/2") Depth From Wall 50mm (2") Product Weight 27Kg (59.5lb) Packaging Dimensions 181cm X 81cm X 26cm (71 1/4" x 31 7/8" x 10 1/4") Shipping Weight 70Kg (154lb) Movement Type Motorised Power Supply Required 110V - 240V AC Power Consumption Max. 110W Power Consumption Standby 3W Control Options IR Remote, RS232, Contact Closure Product Options / Features Custom RAL paint finishes Package Contents Mechanism, IR remote control Marine Suitable No TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 005 WWW NET . . SHEET 2 FUTUREAUTOMATION

Page 3

PIC SD 2 PICTURE SIDE MECHANISM RECESS DETAILS CABLES: During installation, cables between the two mechanisms shall be required to run to a suitable 3/8" storage location; connecting to the control box (207[8 10 Recess for the screen. The front of the screen can 1/8"] x 150[5 7/8"] x 52[2 1/16"]). be flush with the wall surface or set slightly back. A nominal 40mm[1 9/16"] cable entry/exit hole is recommended to provide suitable access for cable routing. The control box shall need to be connected into a mains (13A) plug socket. An infrared receiver on a 1.5m[59 1/16"] lead is also plugged into the control box. PANELS: The moving panels shall be 10mm[3/8"] proud of the wall surface. NOTE: 1400mm[55 1/8"] is the widest recess this version of the mechanism can cover. This dimension can be reduced for small recesses but not increased. 31 1/2" 800 Cable exit/entry point 1"

25

55 1/8"

1400

TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 005 WWW NET . . SHEET 3 FUTUREAUTOMATION

Page 4

PIC SD 2 PICTURE SIDE MECHANISM PANEL DETAILS 124 13/16" These are suggested dimensions for the panels.

3171 69 11/16"

The panels must have an internal depth of 45mm

1770 to conceal the mechanism; as shown in DETAIL U.

1 3/4" 45 35 7/16" 900

1" 25

DETAIL U SCALE 1 : 2 67 11/16" 1720 T U 31 1/2" 800 55 1/8" 1400 MAXIMUM RECESS WIDTH 33 7/16" 850 SECTION T-T T TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 005 WWW NET . . SHEET 4 FUTUREAUTOMATION

Page 5

PIC SD 2 PICTURE SIDE MECHANISM PANEL MOUNTING DETAILS Panel mount plates hook onto two bolts. The height of the bolts can be adjusted to ensure the panels are level. DETAIL X V SCALE 2 : 1 W X Mount plates fasten to the top inside face of the panel DETAIL V SCALE 1 : 3 SECTION W-W W SCALE 1 : 10 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 005 WWW NET . . SHEET 5 FUTUREAUTOMATION

Page 6

PIC SD 2 PICTURE SIDE MECHANISM PANEL TRAVEL DETAILS The maximum travel distance is 1435 [56 1/2"]. This accommodates for the MAX recess width for the PIC SD 2(1400 [55 1/8"])

56 1/2" 1435 Representative Screen MAX. TRAVEL 55 1/8" TECHNICAL SHEET 1400 UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 005 MAX. RECESS WIDTH WWW NET . . SHEET 6 FUTUREAUTOMATION

Page 7

PIC SD 2 PICTURE SIDE MECHANISM MOUNTING DETAILS These are suggested dimensions for positioning the mechanisms on the wall. The dimensions are based 10 7/16" around the panel sizes stated on Page 4. 265 28 13/16" 732.5 Mechanism mounts to the wall through a series of 8mm [5/16"] and 6mm [1/4"] slots 13 3/4" 350 10 13/16" 275 7 7/8" 200 4 15/16" 125 13/16" 20 0" 0 Recommended Cable entry/exit hole 40mm [1 9/16"] 11" 280 1" 25 34 1/16" 865 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 005 WWW NET . . SHEET 7 FUTUREAUTOMATION

Page 8

PIC SD 2 PICTURE SIDE MECHANISM CONTROL BOX DETAILS • Power Supply Unit (PSU) will allow 110V or 240V AC input. The same PSU is used for EU or US mains supplies. • Other than control cables, all cables terminate at the control board via standard phoenix connnectors. • Cable loom length supplied at approx. 4m [158"]. Loom can be extended to a maximum of approx. 10m [400"]. • Minimum cable bend radius 25mm [1"]. 8 1/8" IR OUTPUT 207 INDICATOR LED IR LEAD INPUT 3.5mm [0.14"] JACK

RS232 PORT EMERGENCY STOP 150 5 7/8" CONNECTOR

CONTACT CLOSURE PORT

5/16" 8.2 7 1/4"

3/16" 5.2

52 2 1/16"

11/16" 17 AC Mains IN 3 Cables lead from bracket to control box TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 005 WWW NET . . SHEET 8 FUTUREAUTOMATION