Future Automation PICSIDE1 technical sheet

Page 1

EDIT CUSTOM PROPERTIES 29. TITLE TO DESIRED PIC SD 1 PRODUCT CODE PICTURE SIDE MECHANISM 30. SUBHEADING TO DESIRED PRODUCT DESCRIPTION EDIT CUSTOM PROPERTIES TECHNICAL SHEET 31. ISSUE NO. UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 005 TO DESIRED ISSUE NUMBER WWW NET . . SHEET 1 FUTUREAUTOMATION

Page 2

PIC SD 1 PICTURE SIDE MECHANISM SPECIFICATION MEASUREMENTS Maximum Screen Size 42" (1067mm) Maximum Weight Capacity 10Kg (22lb) Maximum Speed 120mm/s Maximum Travel 1184mm (46 5/8") Depth From Wall 50mm (2") Product Weight 24Kg (53lb) Packaging Dimensions 164cm X 81cm X 20cm (64 9/16" x 31 7/8" x 7 7/8") Shipping Weight 33Kg (73lb) Movement Type Motorised Power Supply Required 110V - 240V AC Power Consumption Max. 110W Power Consumption Standby 3W Control Options IR Remote, RS232, Contact Closure Product Options / Features Custom RAL paint finishes Package Contents Mechanism, IR remote control Marine Suitable No TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 005 WWW NET . . SHEET 2 FUTUREAUTOMATION

Page 3

PIC SD 1 PICTURE SIDE MECHANISM RECESS DETAILS CABLES: During installation, cables between the two mechanisms shall be required to run to a suitable Recess for the screen. The front of the screen can 3/8" storage location; connecting to the control box (207 be flush with the wall surface or set slightly back. 10 [8 1/8"] x 150[5 7/8"] x 52[2 1/16"]). A nominal 40mm[1 9/16"] cable entry/exit hole is recommended to provide suitable access for cable routing. The control box shall need to be connected into a mains (13A) plug socket. An infrared receiver on a 1.5m[59 1/16"] lead is also plugged into the control box. PANELS: The moving panels shall be 10mm[3/8] proud of the wall surface. NOTE: 45 1/4" 1150mm[ ] is the widest recess this version of the mechanism can cover. This dimension can be reduced for small recesses but not increased. 27 9/16" 700 1"

25 Cable exit/entry point

45 1/4"

1150

TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 005 WWW NET . . SHEET 3 FUTUREAUTOMATION

Page 4

PIC SD 1 PICTURE SIDE MECHANISM PANEL DETAILS 105 1/16" These are suggested dimensions for the panels.

59 3/4" 2669

1518 The panels must have an internal depth of 45mm

to conceal the mechanism; as shown in DETAIL U. 1 3/4" 45 29 1/2" 750

1" 25

DETAIL U SCALE 1 : 2 57 13/16" 1468 27 9/16" T 700 U 45 1/4" 1150 MAXIMUM RECESS WIDTH 27 9/16" 700 SECTION T-T T TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 005 WWW NET . . SHEET 4 FUTUREAUTOMATION

Page 5

PIC SD 1 PICTURE SIDE MECHANISM PANEL MOUNTING DETAILS V Panel mount plates hook onto two bolts. The height of the bolts can be adjusted to ensure the DETAIL X panels are level. SCALE 2 : 1 W X Mount plates fasten to the top inside face of the panel DETAIL V SCALE 1 : 3 SECTION W-W SCALE 1 : 8 W TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 005 WWW NET . . SHEET 5 FUTUREAUTOMATION

Page 6

PIC SD 1 PICTURE SIDE MECHANISM PANEL TRAVEL DETAILS The maximum travel distance is 1184 [46 5/8"]. This accommodates for the MAX recess width for the PIC SD 1(1150[45 1/4"])

46 5/8" 1184 Representative Screen MAX. TRAVEL 45 1/4" TECHNICAL SHEET 1150 UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 005 MAX. RECESS WIDTH WWW NET . . SHEET 6 FUTUREAUTOMATION

Page 7

PIC SD 1 PICTURE SIDE MECHANISM MOUNTING DETAILS These are suggested dimensions for positioning the mechanisms on the wall. The dimensions are based around the panel sizes stated on Page 4. 10 7/16" 23 15/16" 265 607.5 Mechanism mounts to the wall through a series of 8mm [5/16"] and 6mm [1/4"] slots 11 13/16" 300 8 7/8" 225 5 7/8" 150 2 15/16" 75 0" 0 3 1/8" 80 Recommended Cable entry/exit hole 40mm [1 9/16"] 11" 280 1" 25 29 1/8" 740 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 005 WWW NET . . SHEET 7 FUTUREAUTOMATION

Page 8

PIC SD 1 PICTURE SIDE MECHANISM CONTROL BOX DETAILS • Power Supply Unit (PSU) will allow 110V or 240V AC input. The same PSU is used for EU or US mains supplies. • Other than control cables, all cables terminate at the control board via standard phoenix connnectors. • Cable loom length supplied at approx. 4m [158"]. Loom can be extended to a maximum of approx. 10m [400"]. • Minimum cable bend radius 25mm [1"]. 8 1/8" IR OUTPUT 207 INDICATOR LED IR LEAD INPUT 3.5mm [0.14"] JACK

RS232 PORT EMERGENCY STOP 150 5 7/8" CONNECTOR

CONTACT CLOSURE PORT

5/16" 8.2 7 1/4"

3/16" 5.2

52 2 1/16"

11/16" 17 AC Mains IN 3 Cables lead from bracket to control box TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 005 WWW NET . . SHEET 8 FUTUREAUTOMATION