Future Automation DCL-R1 technical sheet

Page 1

DCL-R1 DOME CAMERA LIFT MECHANISM AS SUPPLIED TECHNICAL SHEET (CAMERA NOT SUPPLIED) UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 1 FUTUREAUTOMATION

Page 2

DCL-R1 DOME CAMERA LIFT SPECIFICATION MEASUREMENTS Product Dimensions 390mm [15 3/8"] W x 430mm [16 15/16"] L 160mm [6 5/16"] Maximum Camera Size Maximum Weight Capacity 5Kg [11lb] Max. Movement Type Motorised Control System Housed externally on a 3m Loom Power Supply Required 110V - 240V AC 50/60Hz Power Consumption Max. 720W Power Consumption Standby 3W Control Options IR Remote, RS232, Contact Closure Product Options / Features Custom height mechanisms, Custom mounts / adapters, Custom RAL paint finishes, Marine suitable version Package Contents Mechanism, IR remote control Environment Residential / Commercial Mecahnism: BLACK - RAL9005 Standard Colour Camera Mount: WHITE - RAL9910 Satin Finish Marine Suitable No TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 2 FUTUREAUTOMATION

Page 3

DCL-R1 DOME CAMERA LIFT 16 15/16" 430 6 9/16" Mechanism Total Length GENERAL DIMENSIONS 166 Ceiling Aperture 14 3/16" A 360 MR MDF Moving Panel (Supplied) Cable Exit

145 B B 5 11/16"

160 6 5/16" Moving Panel SECTION B-B 5 5/16" |CAMERA HIDDEN| 135 MR MDF Plaster Edge Trim (Supplied) 19 13/16" 504 MDF Panel Length 6 3/4" A 172 15 3/8" 390 Mount Angle Width 12 5/8" 320 Mechanism Width SECTION A-A |CAMERA HIDDEN| 14 3/16" 7 1/16" 360.0

180.0 SECTION B-B 15 |CAMERA REVEALED| See Sheet 4 for 9/16"

Options Mount 6 5/16" max. Angle 160 max. Camera Diameter 18 1/4" 464 MDF Panel Width TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 3 FUTUREAUTOMATION

Page 4

DCL-R1 DOME CAMERA LIFT HEIGHT OPTIONS The DCL-R1 is available in 6 standard heights to accommodate different cameras. Other height options available on request. When placing an order, please reference one of the order codes listed below. Mechanism Height Max Camera Size Order Code mm [inch] mm [inch] DCL-R1-180 180 [7 1/16] 55 [2 3/16] H x Ø160 [6 5/16] Mechanism Height DCL-R1-205 205 [8 1/16] 80 [3 1/8] H x Ø160 [6 5/16] DCL-R1-240 240 [9 7/16] 115 [4 1/2] H x Ø160 [6 5/16] DCL-R1-270 270 [10 5/8 ] 145 [5 11/16] H x Ø160 [6 5/16] DCL-R1-300 300 [11 13/16] 175 [6 7/8] H x Ø160 [6 5/16] DCL-R1-360 360 [14 3/16] 235 [9 1/4] H x Ø160 [6 5/16] Max Drop = For Cameras larger than 160mm [6 5/16"] see DCL-R2 technical sheet. Camera Height Camera Height - 5mm [3/16"] For Cameras larger than 210mm [8 1/4"] see DCL-R3 technical sheet. For Marine applications please see DCL-M technical documentation. Camera

TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 4 FUTUREAUTOMATION

Page 5

DCL-R1 15 3/4" DOME CAMERA LIFT 400 Stuctural Joist Width 18 1/4" 464 INSTALLATION OPTION 1 - FIXING TO WOODEN BEAMS Plasterboard / Gyproc Opening Load Bearing |STEP 1| - Lift mechanism into ceiling & secure into place using suitable fixings (Not Provided). 1 15/16" 50 Mechanism Mounting Set the bottom of the mech Block to Finished Ceiling 15mm [0.6"] above finished 1 1/4" ceiling level & ensure 32 19 13/16" mechanism is level. 504 Plasterboard / Gyproc Opening 1 1/4" 32 |STEP 2| - Secure supplied bottom panel to mechanism through +1/8" 1 3/8" 0" counterbored holes with supplied +3 M6 x 16mm Pozi Machine Screws 35 0 Secure bottom panel to ceiling 3 15/16" min. framing through predrilled 100 min. countersunk holes (fixings not supplied). Stuctural Joist Outer Battening For

Plasterboard / Gyproc |STEP 3| - Add plaster skim 15 9/16" around bottom panel to

cover countersunk bolts and blend into finished ceiling. Plasterboard / Gyproc Mounting Block TECHNICAL SHEET MDF Plaster Edge Trim OVERRIDDEN DIMENSIONS UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 5 FUTUREAUTOMATION 2.5mm [1/8"] Plaster Skim

Page 6

DCL-R1 18 1/4" DOME CAMERA LIFT 464 Plasterboard / Gyproc Opening INSTALLATION OPTION 2 - FIXING INTO SUSPENDED CEILING |STEP 1| - Offer mechanism up 1 1/4" to 4x M8 Studding and secure 32 into place (NOT PROVIDED). 19 13/16" Adjust in each corner to level and 1 1/4" 504 set bottom of mech 15mm [0.6"] 32 Plasterboard / above finished ceiling level. Gyproc Opening 1 1/4" 32 |STEP 2| - Secure supplied bottom panel to mechanism through counterbored holes with supplied M6 x 16mm Pozi Machine Screws Secure bottom panel to ceiling framing through predrilled countersunk holes Up to 8mm [5/16"] (fixings not supplied). Threaded Rod |STEP 3| - Add plaster skim Suspended Ceiling Structure around bottom panel to Across Jount to MDF / Gyproc cover countersunk bolts and blend into finished ceiling.

Plasterboard / Gyproc

15 9/16"

2.5 1/8" MDF Plaster Edge Trim

TECHNICAL SHEET 2.5mm [1/8"] Plaster Skim UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 6 FUTUREAUTOMATION

Page 7

DCL-R1 DOME CAMERA LIFT MOUNT ANGLE CONFIGURATION The mount angles can be removed and mounted on the ends of the mechanism to suit different ceiling installations. Standard Side Alternative Mount End Mount 16 15/16" 16 15/16" 430 430 15 3/4" ±3/16" 11" 400 ±5 280 14 3/16" ±3/16" 11" 15 3/8" 12 5/8" 390 320 280 360 ±5 5/16" 8.5 5/16" 8.5 3 7/16" 87.5 1 15/16" 1 15/16" 50 TECHNICAL SHEET 50 UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 7 FUTUREAUTOMATION

Page 8

DCL-R1 DOME CAMERA LIFT CAMERA MOUNT Custom WHITE PAINTED Twist-IN camera mount for easy installation and servicing. Ensure camera mount clicks fully into place before operating mechanism. 3mm Thick Slotted Aluminium camera mount plate provided. If required Drill additional holes to mount camera. 1/4" 7 6 5/16" 160 Camera Twist-IN Camera Mount Mount Plate 1 15/16" 50 0" 0 1 3/8" 35 2 7/8" 73 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 8 FUTUREAUTOMATION

Page 9

DCL-R1 DOME CAMERA LIFT MOVING PANEL INSTALLATION Custom Twist-IN panel mount included for easy installation and servicing. 1. Send Mechanism to its CLOSED position (camera lift UP & panel slide Down. 2. Install the jig panel into the mechanism by lifting and rotating. If the 4 clearance holes do not line up with the bolts above, rotate 120° Twist-IN Panel 3. Mount Loosen the 4x M5 CSK bolts (DO NOT REMOVE) and centre the moving panel in its aperture using 3mm packers. Then fully tighten all 4 bolts. 4. 4x Panel Twist to release the jig panel from the mechanism. Adjustment Bolts 5. Remove the jig panel from the Twist-IN Mount & replace with the finished panel (supplied) Ensure panel mount clicks fully into place before operating mechanism. 1/8"

TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 9 FUTUREAUTOMATION

Page 10

DCL-R1 DOME CAMERA LIFT CONTROL BOX DETAILS

207 8 1/8"

20 max. 13/16" max.

RS232 PORT

CONTACT CLOSURE PORT 1/4" 52 7 2 1/16"

IR OUTPUT INDICATOR LED EMERGENCY STOP CONNECTOR

8 5 5/16" 3/16"

IR LEAD INPUT 5 7/8" 3.5mm [1/8"] JACK 150 NOTES • POWER SUPPLY UNIT (PSU) WILL ALLOW 110V OR 240V AC INPUT. THE SAME PSU IS USED FOR EU OR US MAINS SUPPLIES. • OTHER THAN CONTROL CABLES, ALL CABLES TERMINATE AT CONTROL BOARD VIA STANDARD PHOENIX CONNECTORS. • CABLE LOOM LENGTH SUPPLIED AT APPROX. 3m [118"]. LOOM CAN BE EXTENDED UP TO MAXIMUM OF APPROX. 10m [400"]. • MINIMUM CABLE BEND RADIUS 25mm [1"]. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 10 FUTUREAUTOMATION