Future Automation DCL-R3 technical sheet

Page 1

DCL-R3 DOME CAMERA LIFT MECHANISM AS SUPPLIED TECHNICAL SHEET (CAMERA NOT SUPPLIED) UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 1 FUTUREAUTOMATION

Page 2

DCL-R3 DOME CAMERA LIFT SPECIFICATION MEASUREMENTS Product Dimensions 490mm [19 5/16"] W x 630mm [24 13/16"] L 260mm [10 1/4"] Maximum Camera Size Maximum Weight Capacity 5Kg [11lb] Max. Movement Type Motorised Control System Housed externally on a 3m Loom Power Supply Required 110V - 240V AC 50/60Hz Power Consumption Max. 720W Power Consumption Standby 3W Control Options IR Remote, RS232, Contact Closure Product Options / Features Custom height mechanisms, Custom mounts / adapters, Custom RAL paint finishes, Marine suitable version Package Contents Mechanism, IR remote control Environment Residential / Commercial Mecahnism: BLACK - RAL9005 Standard Colour Camera Mount: WHITE - RAL9910 Satin Finish Marine Suitable No TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 2 FUTUREAUTOMATION

Page 3

DCL-R3 DOME CAMERA LIFT 24 13/16" 630 Mechanism Total Length GENERAL DIMENSIONS 22 1/16" 10 1/2" 560 266 A Ceiling Aperture Cable Exit MR MDF Moving Panel (Supplied)

145 5 11/16"

B B 7 5/16" SECTION B-B 185 |CAMERA HIDDEN| Moving Panel 260 10 1/4" 27 11/16" MR MDF Plaster Edge Trim 704 MDF Panel Length (Supplied) 8 3/4" 222 A 19 5/16" 490 Mount Angle Width 16 9/16" 420 Mechanism Width SECTION A-A

14 3/16" |CAMERA HIDDEN| SECTION B-B 7 1/16" 15 |CAMERA REVEALED| 360.0 9/16"

180.0 See Sheet 4 for 10 1/4" max. Options 260 max. Mount Camera Diameter Angle 22 3/16" 564 MDF Panel Width TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 3 FUTUREAUTOMATION

Page 4

DCL-R3 DOME CAMERA LIFT HEIGHT OPTIONS The DCL-R3 is available in 6 standard heights to accommodate different cameras. Other height options available on request. When placing an order, please reference one of the order codes listed below. Mechanism Height Max Camera Size Order Code mm [inch] mm [inch] DCL-R3-180 180 [7 1/16] 55 [2 3/16] H x Ø260 [10 1/4] Mechanism DCL-R3-205 205 [8 1/16] 80 [3 1/8] H x Ø260 [10 1/4] Height DCL-R3-240 240 [9 7/16] 115 [4 1/2] H x Ø260 [10 1/4] DCL-R3-270 270 [10 5/8 ] 145 [5 11/16] H x Ø260 [10 1/4] DCL-R3-300 300 [11 13/16] 175 [6 7/8] H x Ø260 [10 1/4] DCL-R3-360 360 [14 3/16] 235 [9 1/4] H x Ø260 [10 1/4] Max Drop = Camera Height Camera Height - 5mm [3/16"] For Cameras smaller than 160mm [6 5/16"] see DCL-R1 technical sheet. For Cameras smaller than 210mm [8 1/4"] see DCL-R2 technical sheet. Camera

For Marine applications please see DCL-M technical documentation. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 4 FUTUREAUTOMATION

Page 5

DCL-R3 19 11/16" DOME CAMERA LIFT 22 3/16" 500 564 Stuctural Joist Width Plasterboard / Gyproc Opening INSTALLATION OPTION 1 - FIXING TO WOODEN BEAMS Load Bearing |STEP 1| - Lift mechanism into 1 15/16" ceiling & secure into place using 50 suitable fixings (Not Provided). Mechanism Mounting Block to Finished Ceiling Set the bottom of the mech 15mm [0.6"] above finished 27 11/16" 1 1/4" 704 32 ceiling level & ensure Plasterboard / Gyproc mechanism is level. Opening 1 1/4" 32 |STEP 2| - Secure supplied bottom panel to mechanism through +1/8" counterbored holes with supplied 1 3/8" 0" +3 M6 x 16mm Pozi Machine Screws 35 0 Secure bottom panel to ceiling 3 15/16" min. framing through predrilled 100 min. countersunk holes (fixings not supplied). Stuctural Joist Outer Battening For

Plasterboard / Gyproc |STEP 3| - Add plaster skim 15 9/16" around bottom panel to

cover countersunk bolts and blend into finished ceiling. Plasterboard / Gyproc Mounting Block TECHNICAL SHEET MDF Plaster Edge Trim OVERRIDDEN DIMENSIONS UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 5 FUTUREAUTOMATION 2.5mm [1/8"] Plaster Skim

Page 6

DCL-R3 DOME CAMERA LIFT 22 3/16" 564 Plasterboard / Gyproc Opening INSTALLATION OPTION 2 - FIXING INTO SUSPENDED CEILING |STEP 1| - Offer mechanism up 1 1/4" to 4x M8 Studding and secure 32 into place (NOT PROVIDED). Adjust in each corner to level and 27 11/16" 1 1/4" 704 set bottom of mech 15mm [0.6"] 32 Plasterboard / above finished ceiling level. Gyproc Opening 1 1/4" 32 |STEP 2| - Secure supplied bottom panel to mechanism through counterbored holes with supplied M6 x 16mm Pozi Machine Screws Secure bottom panel to ceiling framing through predrilled countersunk holes Up to 8mm [5/16"] (fixings not supplied). Threaded Rod |STEP 3| - Add plaster skim Suspended Ceiling Structure around bottom panel to Across Jount to MDF / Gyproc cover countersunk bolts and blend into finished ceiling.

Plasterboard / Gyproc

15 9/16"

2.5 1/8" MDF Plaster Edge Trim

TECHNICAL SHEET 2.5mm [1/8"] Plaster Skim UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 6 FUTUREAUTOMATION

Page 7

DCL-R3 DOME CAMERA LIFT MOUNT ANGLE CONFIGURATION The mount angles can be removed and mounted on the ends of the mechanism to suit different ceiling installations. Standard Side Alternative Mount End Mount 24 13/16" 24 13/16" 630 630 23 5/8" ±3/16" 14 15/16" 600 ±5 380 18 1/8" ±3/16" 14 15/16" 19 5/16" 16 9/16" 490 420 460 ±5 380 5/16" 8.5 5/16" 8.5 3 7/16" 87.5 1 15/16" 1 15/16" 50 TECHNICAL SHEET 50 UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 7 FUTUREAUTOMATION

Page 8

DCL-R3 DOME CAMERA LIFT CAMERA MOUNT Custom WHITE PAINTED Twist-IN camera mount for easy installation and servicing. Ensure camera mount clicks fully into place before operating mechanism. 3mm Thick Slotted Aluminium camera mount plate provided. If required Drill additional holes to mount camera. 1/4" 7 10 1/4" 260 Camera Twist-IN Camera Mount Mount Plate 1 15/16" 50 0" 0 1 3/8" 35 4 13/16" 123 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 8 FUTUREAUTOMATION

Page 9

DCL-R3 DOME CAMERA LIFT MOVING PANEL INSTALLATION Custom Twist-IN panel mount included for easy installation and servicing. 1. Send Mechanism to its CLOSED position (camera lift UP & panel slide Down. 2. Install the jig panel into the mechanism by lifting and rotating. If the 4 clearance holes do not line up with the bolts above, rotate 120° Twist-IN Panel 3. Mount Loosen the 4x M5 CSK bolts (DO NOT REMOVE) and centre the moving panel in its aperture using 3mm packers. Then fully tighten all 4 bolts. 4. 4x Panel Twist to release the jig panel from the mechanism. Adjustment Bolts 5. Remove the jig panel from the Twist-IN Mount & replace with the finished panel (supplied) Ensure panel mount clicks fully into place before operating mechanism. 1/8"

TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 9 FUTUREAUTOMATION

Page 10

DCL-R3 DOME CAMERA LIFT CONTROL BOX DETAILS

207 8 1/8"

20 max. 13/16" max.

RS232 PORT

CONTACT CLOSURE PORT 1/4" 52 7 2 1/16"

IR OUTPUT INDICATOR LED EMERGENCY STOP CONNECTOR

8 5 5/16" 3/16"

IR LEAD INPUT 5 7/8" 3.5mm [1/8"] JACK 150 NOTES • POWER SUPPLY UNIT (PSU) WILL ALLOW 110V OR 240V AC INPUT. THE SAME PSU IS USED FOR EU OR US MAINS SUPPLIES. • OTHER THAN CONTROL CABLES, ALL CABLES TERMINATE AT CONTROL BOARD VIA STANDARD PHOENIX CONNECTORS. • CABLE LOOM LENGTH SUPPLIED AT APPROX. 3m [118"]. LOOM CAN BE EXTENDED UP TO MAXIMUM OF APPROX. 10m [400"]. • MINIMUM CABLE BEND RADIUS 25mm [1"]. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 10 FUTUREAUTOMATION