Lutron – QS Sensor Module, Wireless Only, 868 MHz – QSM3-XW-C
The QSM3-XW-C is a ceiling-mounted sensor module that brings Lutron wireless sensors and controls onto the QS link, so they can control Energi Savr Node modules. It takes 868 MHz Radio Powr Savr occupancy and daylight sensors and Pico controls. The QSM3-4W-C is similar, but adds four wired inputs.
Supplied as part of a Lutron systemThe QSM3-XW-C is part of a Lutron system that must be designed, installed and commissioned by a Lutron certified engineer. Contact our design and engineering team for a quotation.Contact our team for a quotation →
- Refurbished In-House
Components repaired or replaced where needed, then cleaned and bench tested.New, Box Opened
Unused surplus stock with opened packaging. This unit is sold untested. - Specification Help
Need help with specification or compatibility? Speak to our team.
Specification
Additional information
| Manufacturer | Lutron |
|---|---|
| Range | Energi Savr Node |
| Model | QSM3-XW-C |
| Product Type | Sensor Modules |
| Works with | The whole Energi Savr Node family, GRAFIK Eye QS control units (QSGR models), Quantum systems, myRoom power modules and Sivoia QS shades / draperies, over the QS link |
| Frequency | 868.1–869.8 MHz (European Union, UAE) |
| Wireless devices | Up to 10 Radio Powr Savr occupancy / vacancy sensors, 10 Radio Powr Savr daylight sensors and 10 Pico wireless controls. Receive only |
| Wired inputs | None |
| Power | 24–36 V DC from the QS link, 100 mA maximum |
| QS link | Counts as 1 device; draws 3 power draw units (PDUs) |
| Dimensions | 103 mm diameter, 30 mm deep |
| Mounting | Ceiling mount, for ceilings 8–30 mm thick |
| Environment | 0–40 °C. Relative humidity less than 90%, non-condensing. Indoor use only |
| Regulatory approvals | CE marked (QSM3), RoHS compliant |
Specification Sheets & Documents
- QS Sensor Module QSM – specification submittal (369242s)PDFView PDF: QS Sensor Module QSM – specification submittal (369242s)
Not sure it’s the right part?
Speak to our in-house specialists about your system, we’ll help identify the part you need.




