Lutron – QS Sensor Module with 4 Wired Inputs, 868 MHz – QSM3-4W-C
The QSM3-4W-C is a ceiling-mounted sensor module that brings Lutron sensors and controls onto the QS link, so they can control Energi Savr Node modules. It takes 868 MHz Radio Powr Savr sensors and Pico controls, and has four wired inputs for sensors, IR receivers or wallstations. The QSM3-XW-C is a similar module for wireless devices only.
Supplied as part of a Lutron systemThe QSM3-4W-C is part of a Lutron system that must be designed, installed and commissioned by a Lutron certified engineer. Contact our design and engineering team for a quotation.Contact our team for a quotation
- Refurbished In-House
Components repaired or replaced where needed, then cleaned and bench tested.New, Box Opened
Unused surplus stock with opened packaging. This unit is sold untested. - Specification Help
Need help with specification or compatibility? Speak to our team.
Specification
Additional information
| Manufacturer | Lutron |
|---|---|
| Range | Energi Savr Node |
| Model | QSM3-4W-C |
| Product Type | Sensor Modules |
| Works with | The whole Energi Savr Node family, GRAFIK Eye QS control units (QSGR models), Quantum systems, myRoom power modules and Sivoia QS shades / draperies, over the QS link |
| Frequency | 868.1–869.8 MHz (European Union, UAE) |
| Wireless devices | Up to 10 Radio Powr Savr occupancy / vacancy sensors, 10 Radio Powr Savr daylight sensors and 10 Pico wireless controls. Receive only |
| Wired inputs | 4 universal inputs, each for one occupancy sensor (LOS- series), daylight sensor (EC-DIR- series), EcoSystem IR receiver, EcoSystem wallstation (CC- series) or wired Pico control (PX- series). Using both the daylight sensor and IR receiver of an EC-DIR- sensor takes two inputs |
| Power | 24–36 V DC from the QS link, 400 mA maximum |
| QS link | Counts as 1 device; draws 3 power draw units (PDUs), plus the PDUs of its wired sensors |
| Dimensions | 103 mm diameter, 30 mm deep |
| Mounting | Ceiling mount, for ceilings 8–30 mm thick |
| Environment | 0–40 °C. Relative humidity less than 90%, non-condensing. Indoor use only |
| Regulatory approvals | CE marked (QSM3), RoHS compliant |
Specification Sheets & Documents
- QS Sensor Module QSM – specification submittal (369242s)View PDF: QS Sensor Module QSM – specification submittal (369242s)
Not sure it’s the right part?
Speak to our in-house specialists about your system, we’ll help identify the part you need.
