Lutron HomeWorks – 4-Zone PRO LED+ Phase Adaptive Power Module – LQSE-4A5-230-D
The LQSE-4A5-230-D is a PRO LED+ four-zone mains dimming module for use in a HomeWorks system, and is the updated version of the LQSE-4A-D. It dims LED, incandescent, halogen and low-voltage lighting, and each zone can work out whether its load needs leading edge or trailing edge dimming, or be locked to one.
Supplied as part of a Lutron systemThe LQSE-4A5-230-D is part of a Lutron system that must be designed, installed and commissioned by a Lutron certified engineer. Contact our design and engineering team for a quotation.Contact our team for a quotation
- Refurbished In-House
Components repaired or replaced where needed, then cleaned and bench tested.New, Box Opened
Unused surplus stock with opened packaging. This unit is sold untested. - Specification Help
Need help with specification or compatibility? Speak to our team.
Specification
Additional information
| Manufacturer | Lutron |
|---|---|
| Range | HomeWorks QS, HomeWorks QSX |
| Model | LQSE-4A5-230-D |
| Product Type | Mains Dimming Modules |
| Number of zones | 4 |
| Power | 220–240 V~ 50/60 Hz, 10 A maximum total input current. Standby power 3.5 W typical |
| Dimming type | Leading and trailing edge |
| Load ratings | Zone 1: LED 1.7 A (400 W); incandescent / halogen and ELV 1200 W; neon / cold cathode and MLV 800 VA (525 W). Zones 2–4, each: LED 1.0 A (250 W); incandescent / halogen and ELV 800 W; neon / cold cathode and MLV 500 VA (375 W) |
| Minimum load | None |
| Load control | Auto-detect of forward phase or reverse phase (leading or trailing edge) dimming, or a locked forward or reverse phase mode. For dimmable loads only |
| Width | 12 DIN modules (216 mm) |
| Dimensions | 216 × 90 mm, 76 mm deep |
| Mounting | Lutron DIN panel, or an IP20 (minimum) enclosure with integrated DIN rail |
| Heat output | 75 BTU/hr maximum |
| Environment | Room ambient 0–40 °C. Relative humidity less than 90%, non-condensing. Indoor use only |
| Regulatory approvals | CE, UKCA, RoHS compliant |
Specification Sheets & Documents
- PRO LED+ Phase Adaptive Power Module LQSE-4A5-230-D – specification submittal (3691155e)View PDF: PRO LED+ Phase Adaptive Power Module LQSE-4A5-230-D – specification submittal (3691155e)
- LQSE-4A5-230-D – installation instructions (032579 Rev. A)View PDF: LQSE-4A5-230-D – installation instructions (032579 Rev. A)
Not sure it’s the right part?
Speak to our in-house specialists about your system, we’ll help identify the part you need.
