Lutron HomeWorks – 4-Zone Adaptive Power Module – LQSE-4A-D
The LQSE-4A-D is a four-zone mains dimming module for use in a HomeWorks system. Each zone can be configured to the load type, such as incandescent, halogen or electronic low-voltage lighting, and in auto mode the module works out whether that load needs leading edge or trailing edge dimming. The LQSE-4A5-230-D is the updated version.
Supplied as part of a Lutron systemThe LQSE-4A-D is part of a Lutron system that must be designed, installed and commissioned by a Lutron certified engineer. Contact our design and engineering team for a quotation.Contact our team for a quotation
- Refurbished In-House
Components repaired or replaced where needed, then cleaned and bench tested.New, Box Opened
Unused surplus stock with opened packaging. This unit is sold untested. - Specification Help
Need help with specification or compatibility? Speak to our team.
Specification
Additional information
| Manufacturer | Lutron |
|---|---|
| Range | HomeWorks QS, HomeWorks QSX |
| Model | LQSE-4A-D |
| Product Type | Mains Dimming Modules |
| Number of zones | 4 |
| Power | 220–240 V~ 50/60 Hz, 10 A maximum total input current |
| Dimming type | Leading and trailing edge |
| Load ratings | Zone 1: 800 W incandescent / halogen and ELV, 800 VA (600 W) MLV and neon / cold cathode. Zones 2–4, each: 500 W incandescent / halogen and ELV, 500 VA (375 W) MLV and neon / cold cathode. No derating, room ambient 0–30 °C |
| Minimum load | None |
| Load control | Auto mode starts in trailing edge and converts to leading edge if an incompatible load is detected. One load type per zone |
| Width | 12 DIN modules (216 mm) |
| Dimensions | 216 × 90 mm, 76 mm deep |
| Mounting | IP20 (minimum) rated consumer panel or breaker panel with integrated DIN rail |
| Heat output | 75 BTU/hr maximum |
| Environment | Relative humidity less than 90%, non-condensing. Indoor use only |
| Standards | RoHS compliant, IEC/EN 60669-2-1, CE marked |
Specification Sheets & Documents
- Adaptive Power Module LQSE-4A-D – specification submittal (369583f)View PDF: Adaptive Power Module LQSE-4A-D – specification submittal (369583f)
Not sure it’s the right part?
Speak to our in-house specialists about your system, we’ll help identify the part you need.
