Lutron RadioRA 3 – PowPak Contact Closure Output Module – LMK-CCO1-24-B
The LMK-CCO1-24-B is a PowPak contact closure output module for use in a RadioRA 3 system, which lets the system trigger gates, heating, ventilation and other equipment. It has one dry contact that can be set to latching, maintained or momentary, and runs on a 24 V supply.
Supplied as part of a Lutron systemThe LMK-CCO1-24-B is part of a Lutron system that must be designed, installed and commissioned by a Lutron certified engineer. Contact our design and engineering team for a quotation.Contact our team for a quotation
- Refurbished In-House
Components repaired or replaced where needed, then cleaned and bench tested.New, Box Opened
Unused surplus stock with opened packaging. This unit is sold untested. - Specification Help
Need help with specification or compatibility? Speak to our team.
Specification
Additional information
| Manufacturer | Lutron |
|---|---|
| Range | RadioRA 3 |
| Model | LMK-CCO1-24-B |
| Product Type | Interfaces |
| Supply | 24 V AC (45 mA) or 24 V DC (35 mA), either polarity |
| Output | One dry contact, normally open and normally closed; latching, maintained or momentary |
| Contact rating | 1 A at up to 24 V DC, 0.5 A at up to 24 V AC (resistive); minimum close time 500 ms |
| Standby | Under 1 W |
| Frequency | 868.125–868.850 MHz |
| Wireless range | Within 9 m of a repeater or processor |
| Wiring | 0.5–1.5 mm² for the contact terminals |
| Operating environment | 0–55 °C, 0–90 % RH non-condensing, indoor only |
| Approvals | CE |
Specification Sheets & Documents
- RF CCO Module – product specifications (369770e, 02.09.26)View PDF: RF CCO Module – product specifications (369770e, 02.09.26)
- RF CCO Module – Installation Guide (P/N 041424)View PDF: RF CCO Module – Installation Guide (P/N 041424)
Not sure it’s the right part?
Speak to our in-house specialists about your system, we’ll help identify the part you need.
