This document could not be shown here. Open the PDF.
Text of this document10 pages · 834 words
Page 1
Instruction Manual XCE-EOS-SB (RK-EOS) Surface Mount/Backbox Pattress
2025 Version 1.0.0
Page 2
Contents
1.0 What is the XCE-EOS-SB 3 1.1 Product Image 3 1.2 Product Features 3 1.3 In The Box 3 1.4 Product Requirements 3 2.0 Installation Instructions 4 2.1 Wall Surface Mounting 4 2.2 Backbox Mounting 6 4.3 RCE-WDGE Mounting 8 Appendix 1 - Coverplate Options 10
XCE-EOS-SB Instruction Manual (RK-EOS) | Page 2 Version 1.0.0
Page 3
1.0 What is the XCE-EOS-SB The XCE-EOS-SB is a mounting pattress designed for the RK-EOS keypad. It offers three possible installation options:
Surface mount Backbox mount (UK or EU backbox) Freestand mount (with RCE-WDGE)
NB The XCE-EOS-SB is also compatible with the WK-EOS. See the XCE-EOS-SB (WK-EOS) Instruction Manual for more information.
1.1 Product Image
Front (coverplate not included) Side
NB The coverplate in the product image above is a separate product; see Appendix 1 - Coverplate Options for more information. 1.2 Product Features Surface mounting is used when a backbox installation is not practical or possible Compatible with both UK and EU standard backboxes Attaches to the RCE-WDGE (sold separately) to create a portable, freestanding remote control 1.3 In The Box Internal pattress (Part B) Main pattress body (Part A) 4 x M3 x 5mm pan head cross screws 1.4 Product Requirements RP-EOS-XX-XX Coverplate (not included) (See Appendix 1 - Coverplate Options) RK-EOS Keypad (not included)
XCE-EOS-SB Instruction Manual (RK-EOS) | Page 3 Version 1.0.0
Page 4
2.0 Installation Instructions The XCE-EOS-SB is in two main parts, labelled below:
2.1 Wall Surface Mounting
Secure Part B to the wall using 1 two of the four mounting holes. The fixings can be oriented horizontally or vertically.
Push the RK-EOS keypad into 2 Part A.
Important
1. Ensure the RK-EOS is aligned with the pry gap at the bottom of the XCE.
2. Ensure arrows on the pattress are pointing up as shown.
3. Ensure that the aerial (highlighted red) is pulled to the front of Part A and XCE-EOS-SB Instruction Manual (RK-EOS) | Page 4 Version 1.0.0
Page 5
threaded through the aerial channel hole. Turn over Part A and thread the 3 aerial (highlighted red) through the channel on the outer edge of the pattress.
Secure Part A to Part B using 5 the four screws.
Line up the coverplate clips to 6 the fixing points on Part B and push down firmly to secure the coverplate.
Coverplate options can be found in Appendix 1 - Coverplate Options
XCE-EOS-SB Instruction Manual (RK-EOS) | Page 5 Version 1.0.0
Page 6
2.2 Backbox Mounting
The XCE-EOS-SB is compatible with UK or EU backboxes.
Mount Part B to either a UK or 1 EU backbox using the vertical or horizontal fixings.
Push the RK-EOS keypad into 2 Part A.
Straighten the aerial in the backbox to improve the wireless range.
Important
1. Ensure the RK-EOS is aligned with the pry gap at the bottom of the XCE.
2. Ensure arrows on the
pattress are pointing up as
shown.
3. Ensure that the aerial (highlighted red) is pulled to the front of Part A and threaded through the aerial channel hole. XCE-EOS-SB Instruction Manual (RK-EOS) | Page 6 Version 1.0.0
Page 7
Secure Part A to Part B using 5 the four screws.
Line up the coverplate clips to 6 the fixing points on Part B and push down firmly to secure the coverplate.
XCE-EOS-SB Instruction Manual (RK-EOS) | Page 7 Version 1.0.0
Page 8
2.3 RCE-WDGE Mounting
The XCE-EOS-SB can be mounted in the RCE-WDGE to create a portable and freestanding remote control.
Secure Part B to the 1 fixings on the RCE-WDGE.
There are 2 adhesive pads at the top to help secure the RCE-WDGE to the XCE-EOS-SB
Push the RK-EOS 2 keypad into Part A.
Important
1. Ensure the RK-EOS is aligned with the pry gap at the bottom of the XCE.
2. Ensure arrows on the pattress are pointing up as
shown.
3. Ensure that the aerial (highlighted red) is pulled to the front of Part A and threaded through the aerial channel hole. XCE-EOS-SB Instruction Manual (RK-EOS) | Page 8 Version 1.0.0
Page 9
Turn over Part A 3 and thread the aerial (highlighted red) through the channel on the outer edge of the pattress.
Secure Part A to 4 Part B using the four screws.
Line up the 5 coverplate clips to the fixing points on Part B and push down firmly to secure the coverplate.
® Rako and the Rako logo are registered trademarks of Rako Controls Ltd. Unauthorised use of these trademarks is prohibited. All other product names, company names, and logos mentioned herein may be trademarks of their respective owners. XCE-EOS-SB Instruction Manual (RK-EOS) | Page 9 Version 1.0.0
Page 10
Appendix 1 - Coverplate Options
Button Layout
(09) (YBK) (02) (35) (MWH) (01) (91) Matt Matt Polished Satin Matt Antique Polished Bronze Black Chrome Chrome White Brass Brass
RP-EOS-60-PB RP-EOS-60-PC RP-EOS-60-SC RP-EOS-60-AB RP-EOS-60-WH RP-EOS-60-MB RP-EOS-60-BM
RP-EOS-30-PB RP-EOS-30-PC RP-EOS-30-SC RP-EOS-30-AB RP-EOS-30-WH RP-EOS-30-MB RP-EOS-30-BM
RP-EOS-61-PB RP-EOS-61-PC RP-EOS-61-SC RP-EOS-61-AB RP-EOS-61-WH RP-EOS-61-MB RP-EOS-61-BM
RP-EOS-31-PB RP-EOS-31-PC RP-EOS-31-SC RP-EOS-31-AB RP-EOS-31-WH RP-EOS-31-MB RP-EOS-31-BM
XCE-EOS-SB Instruction Manual (RK-EOS) | Page 10 Version 1.0.0
Need assistance or looking to source this item?