Rako WSR-DLI Technical Specifications

Page 1

Datasheet WSR-DLI Wired DALI Controller What is the WSR-DLI? Technical Data The WSR-DLI is used in a Rako Wired network to control up Dimensions 190x105x66mm to 64 DALI Ballasts. Input Supply DALI - 12V DC Rako Wired - 15V DC The WSR-DLI is configured in Rasoft Pro using a WK-HUB Weight 280g communication device, short addresses are assigned to DALI ballasts in the device menu, the DALI ballasts can then Housing UL94-V0 be grouped or controlled individually within 15 Channels in Connections Rako wired network - RJ11 Socket or a single room. Krone Connector DALI output - 4-way screw terminal When used with compatible DT6 or DT8 Ballasts, the Climate Range Temperature +2C to +40C WSR-DLI can be used for RGBW and colour-tunable control. Humidity +5% to 95% Features non-condensing • 16 Scenes Load Types DT6 or DT8 ballasts • Colour temperature control Minimum Load N/A • RGBWAF control Maximum Load 64 DALI ballasts • Colour wheel • Temperature slider Standards RoHS UKCA, CE Connections/Dimensions EN 60669-2-5:2016 Communication CAN, DALI Installation and Setup For information on installing and setting up the WSR-DLI, see the WSR-DLI Manual. Document Version 2.0.0 telephone +44 (0) 1634 226666 | www.rakocontrols.com WE RESERVE THE RIGHT TO CHANGE THE SPECIFICATION AND DATA HEREWITH WITHOUT NOTICE. © 2024 RAKO CONTROLS LIMITED