This document could not be shown here. Open the PDF.
Text of this document2 pages · 378 words
Page 1
data sheet WWMMTT--440000 400W TRAILING EDGE PLUGGABLE DIMMER FOR USE WITH RAK8-MB WWHHAATT IISS IITT ?? The WMT-400 pluggable module is suitable for WMT-400 is a pluggable The dimming LED lamps, tungsten and low-voltage trailing edge dimmer module to halogens and any other trailing edge dimmable load. be used with the RAK8-MB. The unit is plugged directly into one of the slots on the RAK8- MB. The WMT-400 can be used in combination with any of the other modules compatible with the RAK8 allowing for greater flexibility during both specification and installation. Trailing edge dimming technology gives smooth quiet dimming of electronic transformer fed loads and maximises dimming performance of most GU10 and other LED fittings. The WMT-400 combines with the RAK8-MB to provide a centralised lighting control system that can integrate with either wireless or wired Rako products. The WMT-400 uses trailing edge dimming technology to maximise the performance of most dimmable LED downlights including GU10s and integrated downlights (refer to Rako Controls LED test page for compatibility and maximum loadings: leds.rakocontrols.com). The WMT- 400 is also the recommended dimmer for GU10 tungsten lamps due to its in-built short-circuit protection, necessary with this style of lamps. MMaaxxiimmuumm llooaaddiinngg iiss 440000WW ooff mmaaiinnss hhaallooggeenn oorr 220000WW ooff mmaaiinnss ddiimmmmaabbllee LLEEDD llaammppss.. As with all RAK8 pluggable modules no memory is stored on the WMT- 400. All programming is stored on the motherboard meaning the WMT- 400 can be swapped with any other module without the need to be re- programmed. For other fitting types please refer to the datasheet for: WML-300 WDA-600 WMS-600 www.rakocontrols.com
Page 2
data sheet WWMMTT--440000 400W TRAILING EDGE PLUGGABLE DIMMER FOR USE WITH RAK8-MB technical data mechanical data dimensions 115x25x28mm protection Auto resetting over current protection Auto thermal shutdown Voltage surge protection maximum loading 400W - Mains Halogen 200W - Mains dimmable LEDs mm minimum loading 1W 115 weight 50g climate range Temperature +2C to +40C Humidity +5% to 95% non condensing 25mm standards Emissions - EN61000-6-3 : 2001 Immunity - EN61000-6-1 : 2001 communication RS485 to other RAKs, RX-Link and connection details RAK-Link connections Pluggable module telephone +44 (0) 1634 226666 fax +44 (0) 1634 226667 www.rakocontrols.com WE RESERVE THE RIGHT TO CHANGE THE SPECIFICATION AND DATA HEREWITH WITHOUT NOTICE. © 2017 RAKO CONTROLS LIMITED
Need assistance or looking to source this item?