Rako WDA-600 Technical Specifications

Page 1

data sheet WDA-600 600W DIGITAL DIMMING UNIT FOR USE WITH RAK8-MB WHAT IS IT ? The WDA-600 pluggable module is for use with The WDA-600 is a pluggable 0-10V, DSI and DLI dimmable ballasts. universal 0-10v, DSI & DLI digital dimmer for use with RAK8-MB. The unit is plugged directly into one of the slots on the RAK8- MB. Features both digital control output for 0-10V, DSI and DLI and a switched mains output for up to 600VA of fittings. The WDA-600 combines with the RAK8-MB to provide a centralised lighting control system that can integrate with either wireless or wired Rako products. The control signal output type (0-10V/DSI/DLI) is selectable via the Rasoft Pro software. The selected output is indicated by an LED on the pluggable module. Switched mains output comes from the channel output on the RAK8-MB, digital outputs are from a pluggable terminal block on the daughterboard itself. As with all RAK8 pluggable modules no memory is stored on the WDA- 600. All programming is stored on the motherboard meaning the WDA- 600 can be swapped with any other module without the need to be re- programmed. For other fitting types please refer to the datasheet for: WMT-400 WML-300 WMS-600 www.rakocontrols.com

Page 2

data sheet WDA-600 600W DIGITAL DIMMING UNIT FOR USE WITH RAK8-MB technical data mechanical data dimensions 115x25x24mm maximum loading 600W minimum loading 1W weight 55g m m

5 climate range Temperature +2C to +40C 1 1 Humidity +5% to 95% non condensing standards Emissions - EN61000-6-3 : 2001 Immunity - EN61000-6-1 : 2001 communication RS485 to other RAKs, RX-Link and 25mm RAK-Link connections Pluggable module connection details telephone +44 (0) 1634 226666 fax +44 (0) 1634 226667 www.rakocontrols.com WE RESERVE THE RIGHT TO CHANGE THE SPECIFICATION AND DATA HEREWITH WITHOUT NOTICE. © 2019 RAKO CONTROLS LIMITED