Rako WA-NEX Technical Specifications

Page 1

Datasheet WANEX Wired System Network Extender What is the WANEX? Technical Data The WANEX is a Wired network extender consisting of two Dimensions 190x105x66mm isolated connection points. Input Supply Powered from RAK-LINK via RJ11 connection or punchdown connection There are two main uses for the WANEX: Weight 280g Systems that exceed the maximum cable length of 3000m Housing UL94-V0 for radial Wired networks or 1500m for star Wired networks. Connections Local side - RJ11 port, krone connector, The WANEX is used to partition the system, creating two concentric jack smaller Wired networks as if it were a single system. Remote side - RJ11 port, krone connector, concentric jack When there are three or more cables at a single connection Climate Range Temperature +2C to +40C point and the use of a RAK-STAR is not possible. This Humidity +5% to 95% non-condensing is typical when retrofitting a 4-core system, for further information, see Appendix 1 of the WANEX Manual. Cable type UTP CAT5e, CAT6, RJ11 Connections/Dimensions Standards RoHS UKCA, CE EN 60669-2-5:2016 Communication CAN Installation and Setup For information on installing and setting up the WANEX, see the WANEX Manual. Document Version 2.0.0 telephone +44 (0) 1634 226666 | www.rakocontrols.com WE RESERVE THE RIGHT TO CHANGE THE SPECIFICATION AND DATA HEREWITH WITHOUT NOTICE. © 2024 RAKO CONTROLS LIMITED